SPECIFICATIONS FOR THE ENTIRE DESIGN TEAM

Construction projects initially involve the input and co-ordination of a team of Architects and design professionals, often using the same design tools to ensure the team is on the same page. So it makes sense that all team members use the same structures, language and formats when writing specifications for their work. Masterspec’s expanded range of services now allows all members of the team to achieve this.

Masterspec has the tools you’ll need to create seamless specification documentation across the project with specialised products covering the Architectural, Engineering, Landscape and Interiors disciplines.

Masterspec specification systems cover the full spectrum of building and project types from residential alterations to high rise commercial buildings, from interior fit-outs to major industrial projects.

Masterspec provides certainty with a consistent approach to documentation structure. Not only the design team but Quantity Surveyors, BCA officials, Project Managers and Building Contractors will all know where to find the information they need to ensure building quality.

Masterspec specifications all use the same CBI Coding - clause structures match, all specifications cite the same up-to-date Building Codes and New Zealand Standards

Calculation sets and specialist support documentation can be attached to the appendices at the back of the master specification

Masterspec keeps all the documentation aligned making it easier for project managers to arrange the construction programme and necessary insurances to suit.

For more information on ensuring your entire team uses Masterspec call Trish Croot on 09 631 7044 today or email trish@masterspec.co.nz

  »GOOGLE VERIFIED
  »ENGINEERING TERMS AND CONDITIONS
  »REVISITING OUR HERITAGE
  »FURTHER CHANGES PROPOSED TO NZBC C PROTECTION FROM FIRE
  »REDUCING PARTITION WALL FAILURE IN SEISMIC EVENTS
  »BUILDING CODE UPDATED REFERENCES
  »MEDIUM DENSITY HOUSING RESOURCE PAGE
  »SPECIFICATIONS HOW-TO
  »DETAILED ENGINEERING EVALUATION TOOLS FROM SESOC
  »BIM FOR ALL - DUMMIES OR NOT
  »MASTERSPEC'S PRODUCT RANGE SUPPORTS MULTI-DISCIPLINARY TEAMS
  »SPECIFICATIONS AND CONTRACTS
  »BUILDING ACT 2004 AMENDMENTS
  »SURFACE FIRE PERFORMANCE OF INSULATION IN PLENUMS AND DUCTS
  »CHANGES TO THE BUILDING ACT – HOW DO THEY AFFECT ARCHITECTS, DESIGNERS AND DESIGN/BUILD
  »WHAT IS THE PURPOSE OF A SPECIFICATION???
  »NZBC C PROTECTION FROM FIRE - AMENDMENTS DECEMBER 2013
  »AMENDMENTS TO NZS 4211
  »STRENGTHENING NEW ZEALAND’S STANDARDS SYSTEM – TRANSITION PROJECT
  »2014 INTERNATIONAL BIM REPORT
  »UPDATED GUIDANCE FOR EXEMPT BUILDING WORK
  »TACTILE GROUND SURFACE INDICATORS (TGSIS)
  »STREAMSIDE PROTECTION AND GUIDES TO RESTORATION
  »SEISMIC RESTRAINTS FOR GAS, WATER HEATERS & APPLIANCES
  »CHANGES TO NZBC C PROTECTION FROM FIRE - 1 JULY 2014
  »CHANGES TO H3.1 FOR SOLID TIMBER FRAMING
  »FIRE SAFETY AND DESIGN – FURTHER READING
  »AS 3566.2 WITHDRAWN BY STANDARDS AUSTRALIA BUT IN E2/AS1?
  »AIR CONDITIONING REFRIGERANT SAFETY
  »WHAT IS GOING ON WITH HEALTH & SAFETY?
  »FURTHER WORKED EXAMPLES TO ACCOMPANY THE SEISMIC DESIGN OF RETAINING STRUCTURES GUIDANCE
  »PASSIVE HOUSING – GENERAL DESIGN PRINCIPLES
  »SPECIFYING FIRE BLANKETS
  »DESIGN AND BUILD - REASONS FOR CONSENT DELAYS
  »AS/NZS 2312 SPLIT UP AND AMENDED
  »FIRE PERFORMANCE OF FLOOR COVERINGS LAID OUT
  »CODEMARK CERTIFICATION POPULAR WITH PRODUCT PARTNERS
  »LOW EMISSIVE GLASS COATINGS - SURFACE 2 OR 3 – WHAT SHOULD IT BE?
  »INTERIOR NOISE CONTROL - TRYING TO UNDERSTAND ACOUSTICS
  »MASTERSPEC INTERVIEW: ANDREW MAYNARD
  »DRAINAGE, LAYING OUT THE OPTIONS
  »ELECTRONIC LEAK DETECTION OF MEMBRANES
  »INTERIOR ELEMENTS - BUILDING CODE REQUIREMENTS CHECKLIST
  »NEW GENERIC SECTION 4239 SOFFIT CLADDING
  »SECTIONS CHANGE AS SOME INSULPRO PRODUCTS REBRANDED AS MAMMOTH
  »MASTERSPEC RELEASE 12 NEW SERVICES ENGINEERING WORK SECTIONS.
  »STRUCTURALLY FIXED CAVITY BATTENS
  »CHANGES TO THE LAMINEX GROUP
  »WORK SECTION UPDATES AND DELETIONS FOR JULY 2015
  »ALTERNATIVE TEST METHODS FOR ACHIEVING NZBC C GROUP NUMBERS.
  »CONCRETE SLABS - FREE JOINTS OR SHRINKAGE CONTROL JOINTS???
  »DRAINAGE GENERAL NAME CHANGE
  »ROOF SAFETY MESH - AS/NZS 4389 UPDATED
  »PLUMBING AND DRAINAGE - AS/NZS 3500.1 AND AS/NZS 3500.2 UPDATED
  »NEW BASIC SECTION FOR PLYWOOD AND PARTICLEBOARD FLOORS
  »GREEN BUILDING REQUIREMENTS IN THE RESIDENTIAL SECTOR
  »NEW SECTIONS FOR MASTERSPEC BASIC AND INTERIORS USERS
  »HEAT PUMP WATER HEATERS NOW AN OPTION
  »WELDING GALVANIZED OR THERMAL SPRAYED STEEL
  »MAJOR CHANGES TO THE CARPENTRY BASED SECTIONS IN MASTERSPEC BASIC AND INTERIORS
  »A COLLECTION OF COUNCIL DEVELOPMENT, SUBDIVISION AND ENGINEERING GUIDES
  »NEW NZS 4407 - ONE ROAD AGGREGATE STANDARD TO UNITE THEM ALL
  »PLUGGING INTO ELECTRIC CARS
  »PUTTING MORE INTO 2242 BACKFILLING
  »AS/NZS 3500.4 HEATED WATER SERVICES UPDATED
  »MAJOR CHANGES TO THE CONSTRUCTION CONTRACTS ACT
  »AS/NZS 1668.1 VENTILATION AND AIR-CON FIRE AND SMOKE CONTROL
  »HEALTH AND SAFETY AT WORK ACT 2015 AND THE SPECIFICATION
  »COMPATIBILITY AND ADHESION OF WET SEALS AND SILL TAPES IN WINDOW INSTALLATIONS
  »JMF TIMBER WINDOW AND DOOR JOINERY CAN BE SPECIFIED ON A ‘TEST’ BASIS
  »STEEL STRUCTURES - NZS 3404.1: 1997 VERSES NZS 3404.1: 2009
  »ASBESTOS REMOVAL NEW LICENCE REGIME
  »MBIE PRODUCT ASSURANCE SEMINARS FOR SUPPLIERS/MANUFACTURERS
  »RESIDENTIAL CONSTRUCTION HANDOVER
  »A BIG MONTH OF CHANGES TO STANDARDS
  »INTERNATIONAL BIM OBJECT STANDARD TO BE RELEASED
  »NON-COMPLIANT CONCRETE REINFORCEMENT
  »TIPS FOR SPECIFYING FIXED AUDIENCE SEATING
© 2017 Construction Information Limited
Construction Information Limited Construction Information
Powered by streamSWEET CMS  
Feedback