6711RE
RESENE ENVIRONMENTAL PAINTING EXTERIOR
1
GENERAL

If you have pre-customised this work section using the "questions and answers" provided as part of the downloading process, it may be necessary to amend some clauses to suit the final project-specific version.

 

The section must still be checked and customised to suit the project being specified, by removing any other irrelevant details and adding project-specific details and selections.

 

This section relates to the surface preparation, painting and clear finishing of new and existing exterior substrates using Resene environmental architectural and decorative coating systems.

Modify or extend the above description to suit the project being specified.

 

This 6711RE RESENE ENVIRONMENTAL PAINTING EXTERIOR section is intended to be combined as appropriate with the sections listed below and they collectively comprise painting work:

 

These sections have been written for use with Resene Surface Information & Preparation Data Sheets (SIPDS) and online technical product data sheets.  Modify and extend the selected systems (refer to SELECTIONS) as necessary for the substrate and its particular location (e.g. the substrate may be the same for bathroom and bedroom but the finish may differ).

 

Every endeavour has been made to ensure all products in this section are waterborne/Low or Ultra Low VOC & ECNZ approved (Environmental Choice New Zealand) however where system performance would be significantly compromised (NEC) Non-Environmental Choice NZ products have been suggested or specified.

 

Add project-specific clauses where extensive masking and spraying of coatings is involved.  Add clauses when specifying spray or roller-applied high-build products, or when specifying heavy-duty and solid vinyl wallcoverings.

 

For specific technical information call the Resene Technical Helpline 0800 RESENE (0800 737 363) or at www.resene.co.nz

Related work
1.1
RELATED WORK

Refer to 6700R RESENE PAINTING GENERAL for general matters related to painting work.

Refer to 6721RE RESENE ENVIRONMENTAL PAINTING INTERIOR for interior paint systems.

Modify or delete, include cross references to other sections where these contain related work.  Other related sections in Masterspec Standard could be 6745R RESENE PROTECTIVE COATINGS - STEELWORK for protective coatings.

Requirements
1.2
SAMPLES

Refer to the general section 1270 CONSTRUCTION for details of how samples will be reviewed and how instructions to proceed will be given.  Provide the following samples for review:

 

Sample A

Sample B

Sample C

Sample description:

~

~

~

Sample type:

~

~

~

Number:

~

~

~

Location:

~

~

~

Supporting documentation:

~

~

~

Reviewer:

Contract administrator

~

Contract administrator

~

Contract administrator

~

Time for review:

10 working days ~

10 working days ~

10 working days ~

Review criteria:

~

~

~

The intention of this clause is to allow samples to be obtained that are not otherwise readily available to a reviewer.

                                                                                                                                                                                                                       Delete rows and columns not required or add "n/a".

Sample description:

Describe the sample, size etc.

Prepare samples of the finished work as scheduled, including preparation and colour as specified.

Sample type:

Portable sample for review

Portable control sample

Fixed sample for review

Fixed control sample

 

Control samples define requirements for type and quality and are used for comparison purposes throughout the contract.

 

A "portable" sample is a sample that is easily movable, convenient for carrying. A "fixed" sample is a sample (semi) permanently placed. Expand on these terms as necessary.

Number:

State number of samples required, e.g. a minimum of three control samples - portable allow a sample to be retained on site with the other samples retained by the contract administrator and contractor.

Location:

Identify location of fixed samples, e.g. off site, on site, in situ

Supporting documentation:

Describe any additional documents required to support the review.

Reviewer:

Modify to suit the project, add additional reviewers if required.

Time for review:

Alter time if required. Expand to state timing in relation to when and where the sample is provided, e.g. at first site meeting.

Review criteria:

For example:

- Appearance

- Texture

- Colour

Add any critical items. Provide clarity for work that is not dependent on the review to continue.

2
PRODUCTS
Materials
2.1
PAINT TYPES GENERALLY/ THINNERS AND ADDITIVES

Refer to 6700R RESENE PAINTING GENERAL for product clauses.

Modify or extend, including adding clauses to this section where product information relates exclusively to exterior painting.

3
EXECUTION
Conditions
3.1
EXECUTION

Refer to 6700R RESENE PAINTING GENERAL for execution clauses.

Modify or extend, including adding clauses to this section where product information relates exclusively to exterior painting.

4
SELECTIONS

For further details on selections go to www.resene.co.nz

Substitutions are not permitted to the following, unless stated otherwise.

If substitutions are permitted modify the statement above, ensure the NO SUBSTITUTIONS clause from GENERAL is treated the same.

4.1
INSPECTION OF WORK

Stage

Resene SIPDS Spec number/system

~

~

The level of inspection will depend on the nature of the project and will range from full for large or complex projects, through to intermittent for straightforward work to occasional for initially establishing the standards of execution.  Refer to AS/NZS 2311 Appendix C, Inspection and Testing, for more background.

4.2
BACK PAINTING SCHEDULE

Paint 2 coats (including any pre-prime) to match exposed face coating.

Cladding type        

Extent of back painting        

~

~

Amend to suit project requirements

Extent options:

To cladding manufacturer's requirements

 

Bottom edge & 150mm up

 

Paint whole back, bottom & concealed edges of cladding

 

Paint cladding under trim before fixing

 

Paint whole back, bottom & concealed edges of trim

Note;

Some pre-finished cladding may still need back painting.

Paint, stain and clear finishes can have different sorts of requirements.

4.3
HARDWARE

Hardware for removal:

~

Resene exterior paint systems

EXTERIOR PAINT SYSTEMS: Supply the listed Resene systems for the following substrates.

Note: Select the appropriate first coat by deleting those not applicable.

 

For a current list of VOC's for Resene products see

www.resene.co.nz/archspec/datashts/vocsummary.pdf.

 

For information on how to earn Green Star NZ points with paint see

www.resene.co.nz/greenstarnz.htm.

 

For a current list of Resene  Environmental Choice NZ approved paints see

www.resene.co.nz/comn/envissue/paintlst.htm

 

All products in this section are ECNZ (Environmental Choice New Zealand) approved unless otherwise noted with NEC (Non-Environmental Choice)

Environmental exterior concrete - new
4.4
NEW EXTERIOR IN-SITU CONCRETE – PAINT

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 3/1

1st coat:

Resene Concrete Primer D405, Acrylic Concrete Primer

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen

 Where a Matt finish is required substitute 2nd & 3rd coats with:

 2nd coat:                     Resene Lumbersider Matt D327, Waterborne Matt

 3rd coat:                      Resene Lumbersider Matt D327, Waterborne Matt

 

Where Semi-Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

Where an Acrylic Weathertight membrane is required substitute 2nd & 3rd coats with:

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

3rd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

 

Where a Flat Mineral effect is required substitute 2nd & 3rd coats with:

2nd coat:

Resene AquaShield D601, Acrylic Mineral Effect

3rd coat:

Resene AquaShield D601, Acrylic Mineral Effect

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team.  If required make contact via email - advice@resene.co.nz.

Refer to 6700R RESENE PAINTING GENERAL for form oil and release agent removal.

4.5
NEW EXTERIOR IN-SITU CONCRETE – WEATHERTIGHT MEMBRANE

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 3/1

1st coat:

Resene Concrete Primer D405, Acrylic Concrete Primer

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

3rd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

 

Where High build elastomeric finish is required substitute 2nd & 3rd coats with:

2nd coat:

       Resene X-300E D64, High Build Elastomeric Membrane

3rd coat:

       Resene X-300E D64, High Build Elastomeric Membrane

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team.  If required make contact via email - advice@resene.co.nz.

Refer to 6700R RESENE PAINTING GENERAL for form oil and release agent removal.

4.6
NEW EXTERIOR IN-SITU CONCRETE – CLEAR COAT

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 1C/1

1st coat:

Resene Concrete Clear Gloss D54a, Waterborne Glaze

2nd coat:

Resene Concrete Clear Satin D54a, Waterborne Glaze

3rd coat:

Resene Concrete Clear Satin D54a, Waterborne Glaze

Note: This clear system will not render the coated surface weathertight.

Where Flat finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Concrete Clear Flat D54a, Waterborne Glaze

3rd coat:

Resene Concrete Clear Flat D54a, Waterborne Glaze

 

Where Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Concrete Clear Gloss D54a, Waterborne Glaze

3rd coat:

Resene Concrete Clear Gloss D54a, Waterborne Glaze

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team.  If required make contact via email - advice@resene.co.nz.

Refer to 6700R RESENE PAINTING GENERAL for form oil and release agent removal.

4.7
NEW EXTERIOR TILT SLAB/PRECAST CONCRETE - PAINT

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 1/1

1st coat:

Resene Concrete Primer D405, Acrylic Concrete Primer

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen Acrylic

All Form Oils and Release Agents must be removed from the surface prior to painting.

Refer to Resene SIPDS 3: 1/1 for surface preparation information.

 Where a Matt finish is required substitute 2nd & 3rd coats with:

 2nd coat:                     Resene Lumbersider Matt D327, Waterborne Matt

 3rd coat:                      Resene Lumbersider Matt D327, Waterborne Matt

 

Where Semi-Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

Where an Acrylic Weathertight membrane is required substitute 2nd & 3rd coats with:

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

3rd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

 

Where a Flat Mineral effect is required substitute 2nd & 3rd coats with:

2nd coat:

Resene AquaShield D601, Acrylic Mineral Effect

3rd coat:

Resene AquaShield D601, Acrylic Mineral Effect

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team.  If required make contact via email - advice@resene.co.nz.

4.8
NEW EXTERIOR TILT SLAB/PRECAST CONCRETE – WEATHERTIGHT MEMBRANE

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 1/1

1st coat:

Resene Concrete Primer D405, Acrylic Concrete Primer

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

3rd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

All Form Oils and Release Agents must be removed from the surface prior to painting.

Refer to Resene SIPDS 3: 1/1 for surface preparation information.

Where High build elastomeric finish is required substitute 2nd & 3rd coats with:

2nd coat:

       Resene X-300E D64, High Build Elastomeric Membrane

3rd coat:

       Resene X-300E D64, High Build Elastomeric Membrane

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team.  If required make contact via email - advice@resene.co.nz.

4.9
NEW EXTERIOR TILT SLAB/PRECAST CONCRETE – CLEAR COAT

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 1C/1

1st coat:

Resene Concrete Clear Gloss D54a, Waterborne Glaze

2nd coat:

Resene Concrete Clear Satin D54a, Waterborne Glaze

3rd coat:

Resene Concrete Clear Satin D54a, Waterborne Glaze

Note: All Form Oils and Release Agents must be removed from the surface prior to painting. Refer to Resene SIPDS 3: 1/1 for surface preparation information.

Note01: This clear system will not render the coated surface weathertight.

Note 02: This section is not suitable for highly polished or honed panels. Contact Resene Architectural & Specifier Services Team

 

Where Flat finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Concrete Clear Flat D54a, Waterborne Glaze

3rd coat:

Resene Concrete Clear Flat D54a, Waterborne Glaze

 

Where Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Concrete Clear Gloss D54a, Waterborne Glaze

3rd coat:

Resene Concrete Clear Gloss D54a, Waterborne Glaze

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team. If required make contact via email - advice@resene.co.nz

4.10
NEW EXTERIOR CONCRETE BLOCK/MASONRY – WEATHERTIGHT MEMBRANE

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 2/1

1st coat:

Resene X-200 D62, Acrylic Weathertight Membrane

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

3rd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

Note: Applied as specified this system achieves>180 microns Dry Film Thickness and meets the requirements of CCANZ CP01 1.1.21 for weathertightness of wall construction type A1 & A3.

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team.  If required make contact via email - advice@resene.co.nz.

4.11
NEW EXTERIOR CONCRETE BLOCK/MASONRY – PAINT

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 2/1

1st coat:

Resene Concrete Primer D405, Acrylic Concrete Primer

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen Acrylic

Note: This system does not meet the requirements of CCANZ CP01 1.1.21 for weathertightness of wall construction type A1 & A3.

Where a standard acrylic Semi-Gloss coating is required substitute 2nd, & 3rd coats:

 

 Where a Matt finish is required substitute 2nd & 3rd coats with:

 2nd coat:                     Resene Lumbersider Matt D327, Waterborne Matt

 3rd coat:                      Resene Lumbersider Matt D327, Waterborne Matt

 

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team.  If required make contact via email - advice@resene.co.nz.

4.12
NEW EXTERIOR CEMENTITIOUS RENDER/PLASTER

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 3/1

1st coat:

Resene Limelock D809, Acrylic Cure & Seal

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

3rd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

 Where a Matt finish is required substitute 2nd & 3rd coats with:

 2nd coat:                     Resene Lumbersider Matt D327, Waterborne Matt

 3rd coat:                      Resene Lumbersider Matt D327, Waterborne Matt

 

Where a standard acrylic Low sheen coating is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

Where a standard acrylic Semi-Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

Where a Flat Mineral effect is required add 4th coat:

4th coat

Resene AquaShield D601, Acrylic Mineral Effect

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team.  If required make contact via email - advice@resene.co.nz.

Environmental Exterior cementitious - existing
4.13
EXISTING EXTERIOR IN-SITU/TILT SLAB/PRECAST CONCRETE - PAINT

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 1/3

Spot prime:

Resene Concrete Primer D405, Acrylic Concrete Primer

1st coat:

Resene Lumbersider D34, Low Sheen Acrylic

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

Note: If substrate is friable, powdery or efflorescence is present substitute Resene Concrete Primer with Resene Sureseal D42, Solvent borne pigment sealer (NEC)

 Where a Matt finish is required substitute 1st & 2nd coats with:

 1st coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 2nd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where Semi-Gloss finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

Where a Flat Mineral effect is required substitute 1st & 2nd coats with:

1st coat:

Resene AquaShield D601, Acrylic Mineral Effect

2nd coat:

Resene AquaShield D601, Acrylic Mineral Effect

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team.  If required make contact via email - advice@resene.co.nz.

4.14
EXISTING EXTERIOR IN-SITU/TILT SLAB/PRECAST CONCRETE – WEATHERTIGHT MEMBRANE

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 1/3

Spot prime:

Resene Concrete Primer D405, Acrylic Concrete Primer

1st coat:

Resene X-200 D62, Acrylic Weathertight Membrane

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

Note: If substrate is friable, powdery or efflorescence is present substitute Resene Concrete Primer with Resene Sureseal D42, Solvent borne pigment sealer (NEC)

Where High build elastomeric finish is required substitute 1st & 2nd coats with:

1st coat:

       Resene X-300E D64, High Build Elastomeric Membrane

2nd coat:

       Resene X-300E D64, High Build Elastomeric Membrane

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team.  If required make contact via email - advice@resene.co.nz.

4.15
EXISTING EXTERIOR CONCRETE BLOCK/MASONRY

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 2/3

Spot prime:

Resene Concrete Primer D405, Acrylic Concrete Primer

1st coat:

Resene Lumbersider D34, Low Sheen Acrylic

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

Note: If substrate is friable, powdery or efflorescence is present substitute Resene Concrete Primer with Resene Sureseal D42, Solvent borne pigment sealer (NEC)

 Where a Matt finish is required substitute 1st & 2nd coats with:

 1st coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 2nd coat:                                      Resene Lumbersider Matt D327, Waterborne Matt

 

Where Semi-Gloss finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

Where an acrylic Weathertight Membrane is required substitute 1st & 2nd coats with:

1st coat:

Resene X-200 D62, Acrylic Weathertight Membrane

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

 

Where a High Build Elastomeric Membrane is required substitute 1st & 2nd coats with:

1st coat:

Resene X-300E D64, High Build Elastomeric Membrane

2nd coat:

Resene X-300E D64, High Build Elastomeric Membrane

 

Where a Flat Mineral effect is required substitute 1st & 2nd coats with:

1st coat:

Resene AquaShield D601, Acrylic Mineral Effect

2nd coat:

Resene AquaShield D601, Acrylic Mineral Effect

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team.  If required make contact via email - advice@resene.co.nz.

4.16
EXISTING EXTERIOR CEMENTITIOUS RENDER/PLASTER

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 3/3

Spot prime:

Resene Sureseal D42, Solvent borne pigment sealer (NEC)

1st coat:

Resene Lumbersider D34, Low Sheen Acrylic

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

 Where a Matt finish is required substitute 1st & 2nd coats with:

 1st coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 2nd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where Semi-Gloss finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

Where an acrylic Weathertight Membrane is required substitute 1st & 2nd coats with:

1st coat:

Resene X-200 D62, Acrylic Weathertight Membrane

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

 

Where a High Build Elastomeric Membrane is required substitute 1st & 2nd coats with:

1st coat:

Resene X-300E D64, High Build Elastomeric Membrane

2nd coat:

Resene X-300E D64, High Build Elastomeric Membrane

 

Where a Flat Mineral effect is required substitute 1st & 2nd coats with:

1st coat:

Resene AquaShield D601, Acrylic Mineral Effect

2nd coat:

Resene AquaShield D601, Acrylic Mineral Effect

Where Anti-Graffiti coatings are required please refer to the Resene Architectural & Specifier Services Team.  If required make contact via email - advice@resene.co.nz.

Environmental exterior timber - new
4.17
NEW EXTERIOR TIMBER, PLYWOOD, WEATHERBOARDS, UNPRIMED - PAINT

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 1/1

1st coat:

Resene Quick Dry D45, Waterborne Acrylic Primer Undercoat

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

Where a Low Sheen finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

 Where a Matt finish is required substitute 2nd & 3rd coats with:

 2nd coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 3rd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where a Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Hi-Glo D31, Gloss Acrylic

3rd coat:

Resene Hi-Glo D31, Gloss Acrylic

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered.  Refer to the Resene Website for more information. www.resene.co.nz/coolcolour

4.18
NEW EXTERIOR TIMBER, WEATHERBOARDS, FACTORY PRIMED - PAINT

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 2/1

1st coat:

Resene Wood Primer D40, Solvent-borne Primer (NEC)

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

Note: This section is written on the basis that Timber suppliers typically specify an alkyd solvent-borne primer over factory applied alkyd primers. If this is not the case for this substrate please contact Resene for an alternative specification

 

Where a Low Sheen finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

 Where a Matt finish is required substitute 2nd & 3rd coats with:

 2nd coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 3rd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where a Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Hi-Glo D31, Gloss Acrylic

3rd coat:

Resene Hi-Glo D31, Gloss Acrylic

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered.  Refer to the Resene Website for more information. www.resene.co.nz/coolcolour

4.19
NEW EXTERIOR CEDAR WEATHERBOARDS, UNPRIMED - PAINT

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 1/1

1st coat:

Resene Wood Primer D40, Solvent-borne Primer (NEC)

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

Note: Cedar requires an Alkyd solvent-borne primer to avoid tannin staining issues.

 

Where a Low Sheen finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

 Where a Matt finish is required substitute 2nd & 3rd coats with:

 2nd coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 3rd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where a Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Hi-Glo D31, Gloss Acrylic

3rd coat:

Resene Hi-Glo D31, Gloss Acrylic

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered.  Refer to the Resene Website for more information. www.resene.co.nz/coolcolour.

4.20
NEW EXTERIOR TIMBER DOORS, WINDOWS, JOINERY, UNPRIMED - PAINT

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 7/1

1st coat:

Resene Quick Dry D45, Waterborne Acrylic Primer Undercoat

2nd coat:

Resene Lustacryl D310, Semi-Gloss Waterborne Enamel

3rd coat:

Resene Lustacryl D310, Semi-Gloss Waterborne Enamel

Where a Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Enamacryl D309, Gloss Waterborne Enamel

3rd coat:

Resene Enamacryl D309, Gloss Waterborne Enamel

 

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered.  Refer to the Resene Website for more information www.resene.co.nz/coolcolour.

4.21
NEW EXTERIOR TIMBER DOORS, WINDOWS, JOINERY, FACTORY PRIMED - PAINT

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 8/1

1st coat:

Resene Wood Primer D40, Solvent-borne Primer (NEC)

2nd coat:

Resene Quick Dry D45, Waterborne Acrylic Primer Undercoat

3rd coat:

Resene Lustacryl D310, Semi-Gloss Waterborne Enamel

4th coat:

Resene Lustacryl D310, Semi-Gloss Waterborne Enamel

Note: This section is written on the basis that Timber suppliers typically specify an alkyd solvent-borne primer over factory applied alkyd primers. If this is not the case for this substrate please contact Resene for an alternative specification.

 

Where a Gloss finish is required substitute 3rd & 4th coats with:

3rd  coat:

Resene Enamacryl D309, Gloss Waterborne Enamel

4th coat:

Resene Enamacryl D309, Gloss Waterborne Enamel

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered.  Refer to the Resene Website for more information www.resene.co.nz/coolcolour.

4.22
NEW EXTERIOR CEDAR DOORS, WINDOWS, JOINERY, UNPRIMED - PAINT

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 7/1

1st coat:

Resene Wood Primer D40, Solvent-borne Primer (NEC)

2nd coat:

Resene Quick Dry D45, Waterborne Acrylic Primer Undercoat

3rd coat:

Resene Lustacryl D310, Semi-Gloss Waterborne Enamel

4th coat:

Resene Lustacryl D310, Semi-Gloss Waterborne Enamel

Note: Cedar requires an Alkyd solvent-borne primer to avoid tannin staining issues.

 

Where a Gloss finish is required substitute 3rd & 4th coats with:

3rd coat:

Resene Enamacryl D309, Gloss Waterborne Enamel

4th coat:

Resene Enamacryl D309, Gloss Waterborne Enamel

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered.  Refer to the Resene Website for more information www.resene.co.nz/coolcolour.

4.23
NEW EXTERIOR TIMBER, CEDAR, PLYWOOD, WEATHERBOARDS - STAIN

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 4/1

1st coat:

Resene Waterborne Woodsman D57a, Waterborne Stain

2nd coat:

Resene Waterborne Woodsman D57a, Waterborne Stain

If extra durability is required add a 3rd coat of:

3rd coat:

Resene Waterborne Woodsman D57a, Waterborne Stain

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered.  Refer to the Resene Website for more information www.resene.co.nz/coolcolour.

4.24
NEW EXTERIOR PINE TIMBER DECK - PAINT

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 6/1

1st coat:

Resene Quick Dry D45, Waterborne Acrylic Primer Undercoat

2nd coat:

Resene Walk-On Flooring & Paving Paint – D322, Waterborne

3rd coat:

Resene Walk-On Flooring & Paving Paint – D322, Waterborne

Where a standard acrylic Low Sheen finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

Where a Non-Skid finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Non-Skid Deck & Path, D313, Acrylic

3rd coat:

Resene Non-Skid Deck & Path, D313, Acrylic

Environmental Exterior timber - existing
4.25
EXISTING EXTERIOR TIMBER, PLYWOOD, WEATHERBOARDS - PAINT

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 1/3

Spot Prime:

Resene Quick Dry D45, Waterborne Acrylic Primer Undercoat

1st coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

 Where a Matt finish is required substitute 1st & 2nd coats with:

 1st coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 2nd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where a Low Sheen finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Lumbersider D34, Low Sheen Acrylic

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

Where a Gloss finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Hi-Glo D31, Gloss Acrylic

2nd coat:

Resene Hi-Glo D31, Gloss Acrylic

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered. Refer to the Resene Website for more information. www.resene.co.nz/coolcolour.

4.26
EXISTING EXTERIOR CEDAR WEATHERBOARDS - PAINT

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 1/3

Spot Prime:

Resene Wood Primer D40, Solvent-borne Primer (NEC)

1st coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

Note: Cedar requires an Alkyd solvent-borne primer to avoid tannin staining issues.

 

 Where a Matt finish is required substitute 1st & 2nd coats with:

 1st coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 2nd coat:                                      Resene Lumbersider Matt D327, Waterborne Matt

 

Where a Low Sheen finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Lumbersider D34, Low Sheen Acrylic

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

Where a Gloss finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Hi-Glo D31, Gloss Acrylic

2nd coat:

Resene Hi-Glo D31, Gloss Acrylic

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered. Refer to the Resene Website for more information. www.resene.co.nz/coolcolour.

4.27
EXISTING EXTERIOR TIMBER DOORS, WINDOWS, JOINERY - PAINT

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 7/3

Spot Prime:

Resene Quick Dry D45, Waterborne Acrylic Primer Undercoat

1st coat:

Resene Quick Dry D45, Waterborne Acrylic Primer Undercoat

2nd coat:

Resene Lustacryl D310, Semi-Gloss Waterborne Enamel

3rd coat:

Resene Lustacryl D310, Semi-Gloss Waterborne Enamel

Where a Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Enamacryl D309, Gloss Waterborne Enamel

3rd coat:

Resene Enamacryl D309, Gloss Waterborne Enamel

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered. Refer to the Resene Website for more information. www.resene.co.nz/coolcolour.

4.28
EXISTING EXTERIOR CEDAR DOORS, WINDOWS, JOINERY - PAINT

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 7/3

Spot Prime:

Resene Wood Primer D40, Solvent-borne Primer (NEC)

1st coat:

Resene Quick Dry D45, Waterborne Acrylic Primer Undercoat

2nd coat:

Resene Lustacryl D310, Semi-Gloss Waterborne Enamel

3rd coat:

Resene Lustacryl D310, Semi-Gloss Waterborne Enamel

Note: Cedar requires an Alkyd solvent-borne primer to avoid tannin staining issues.

Where a Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Enamacryl D309, Gloss Waterborne Enamel

3rd coat:

Resene Enamacryl D309, Gloss Waterborne Enamel

 

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered. Refer to the Resene Website for more information. www.resene.co.nz/coolcolour.

4.29
EXISTING EXTERIOR TIMBER, CEDAR, PLYWOOD, WEATHERBOARDS - STAIN

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 4/3

1st coat:

Resene Waterborne Woodsman D57a, Waterborne Stain

2nd coat:

Resene Waterborne Woodsman D57a, Waterborne Stain

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered. Refer to the Resene Website for more information. www.resene.co.nz/coolcolour.

4.30
EXISTING EXTERIOR PINE DECK - PAINT

Surface Prep:

Resene SIPDS No2 and Spec Sheet 2: 6/3

Spot Prime:

Resene Quick Dry D45, Waterborne Acrylic Primer Undercoat

1st coat:

Resene Walk-On Flooring & Paving Paint – D322, Waterborne

2nd coat:

Resene Walk-On Flooring & Paving Paint – D322, Waterborne

Note: this section assumes the existing coating is acrylic.  If it is a polyurethane paving/decking type an adhesion primer of Resene ConcreteSeal 3in1 D409 (NEC) will be required to all existing polyurethane paint coating.

Where a standard acrylic Low Sheen finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Lumbersider D34, Low Sheen Acrylic

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

Where a Non-Skid finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Non-Skid Deck & Path, D313, Acrylic

2nd coat:

Resene Non-Skid Deck & Path, D313, Acrylic

Environmental galvanized steel roofing – new
4.31
NEW EXTERIOR BARE ZINC/GALVANIZED STEEL ROOFING - PAINT

Surface Prep:

Resene SIPDS No4 and Spec Sheet 4: 4/1

1st coat:

Resene Galvo-Prime, Waterborne Galvanised Steel Primer (NEC)

2nd coat:

Resene Summit Roof Semi-Gloss D315s, Acrylic

3rd coat:

Resene Summit Roof Semi-Gloss D315s, Acrylic

Note 01: Where roof is within 500m of sea apply a second coat of the specified primer prior to topcoats.

Note 02: Where dark colours are selected the use of Resene Cool Colour Technology should be considered.  Refer to the Resene Website for more information. www.resene.co.nz/coolcolour

Environmental zinc galvanized steel roofing - existing
4.32
EXISTING EXTERIOR PAINTED ZINC/GALVANIZED STEEL ROOFING - PAINT

Surface Prep:

Resene SIPDS No4 and Spec Sheet 4: 4/3

Spot Prime:

Resene Galvo-One, Solvent borne Galvanised Steel Primer (NEC)

1st coat:

Resene Summit Roof Semi-Gloss D315s, Acrylic

2nd coat:

Resene Summit Roof Semi-Gloss D315s, Acrylic

Note: Resene recommends use of solvent borne galvanized steel primer Resene Galvo-One for best long-term performance

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered. Refer to the Resene Website for more information. www.resene.co.nz/coolcolour.

Environmental fibre cement – new
4.33
NEW EXTERIOR FIBRE CEMENT CLADDING

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 4/1

1st coat:

Resene Concrete Primer D405, Acrylic Concrete Primer

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen Acrylic

Where Semi-Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

Where an acrylic weathertight membrane is required substitute 2nd & 3rd coats with:

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

3rd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

 

Where a Flat Mineral effect is required substitute 2nd & 3rd coats with:

2nd coat:

Resene AquaShield D601, Acrylic Mineral Effect

3rd coat:

Resene AquaShield D601, Acrylic Mineral Effect

4.34
NEW EXTERIOR LINEA™ BOARDS

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 4A/1

1st coat:

Resene Concrete Primer D405, Acrylic Concrete Primer

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

 Where a Matt finish is required substitute 2nd & 3rd coats with:

 2nd coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 3rd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where Semi-Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

Where an acrylic weathertight membrane is required substitute 2nd & 3rd coats with:

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

3rd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

 

Where a Flat Mineral effect is required substitute 2nd & 3rd coats with:

2nd coat:

Resene AquaShield D601, Acrylic Mineral Effect

3rd coat:

Resene AquaShield D601, Acrylic Mineral Effect

4.35
NEW EXTERIOR FIBRE CEMENT SOFFITS - PAINT

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 4/1

1st coat:

Resene Concrete Primer D405, Acrylic Concrete Primer

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

Where a Low Sheen finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

 Where a Matt finish is required substitute 2nd & 3rd coats with:

 2nd coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 3rd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

Exterior fibre cement cladding - existing
4.36
EXISTING EXTERIOR FIBRE CEMENT CLADDING

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 4/3

Spot Prime:

Resene Concrete Primer D405, Acrylic Concrete Primer

1st coat:

Resene Lumbersider D34, Low Sheen Acrylic

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

 Where a Matt finish is required substitute 1st & 2nd coats with:

 1st coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 2nd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where Semi-Gloss finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

Where an acrylic weathertight membrane is required substitute 1st & 2nd coats with:

1st coat:

Resene X-200 D62, Acrylic Weathertight Membrane

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

4.37
EXISTING EXTERIOR LINEA™ BOARDS - PAINT

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 4A/3

Spot Prime:

Resene Concrete Primer D405, Acrylic Concrete Primer

1st coat:

Resene Lumbersider D34, Low Sheen Acrylic

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

 Where a Matt finish is required substitute 1st & 2nd coats with:

 1st coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 2nd coat:                                      Resene Lumbersider Matt D327, Waterborne Matt

 

Where Semi-Gloss finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

4.38
EXISTING EXTERIOR FIBRE CEMENT SOFFITS - PAINT

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 4/3

Spot Prime:

Resene Concrete Primer D405, Acrylic Concrete Primer

1st coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

All products in this section are ECNZ (Environmental Choice New Zealand) approved unless otherwise noted with NEC (Non-Environmental Choice)

 

 Where a Matt finish is required substitute 1st & 2nd coats with:

 1st coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 2nd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where a Low Sheen finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Lumbersider D34, Low Sheen Acrylic

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

Environmental Exterior brick - new
4.39
NEW EXTERIOR UNGLAZED BRICK

Surface Prep:

Resene SIPDS No5 and Spec Sheet 5:2/1

1st coat:

Resene Concrete Primer D405, Acrylic Concrete Primer

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

 Where a Matt finish is required substitute 2nd & 3rd coats with:

 2nd coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 3rd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where Semi-Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

Where an acrylic weathertight membrane is required substitute 2nd & 3rd coats with:

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

3rd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

 

Where a Flat Mineral effect is required substitute 2nd & 3rd coats with:

2nd coat:

Resene AquaShield D601, Acrylic Mineral Effect

3rd coat:

Resene AquaShield D601, Acrylic Mineral Effect

4.40
NEW EXTERIOR BRICK - CEMENTITIOUS RENDER

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3: 3/1

1st coat:

Resene Limelock D809, Acrylic Cure & Seal

2nd coat:

Resene AquaShield D601, Acrylic Mineral Effect

3rd coat:

Resene AquaShield D601, Acrylic Mineral Effect

Where an acrylic weathertight membrane is required substitute 2nd & 3rd coats with:

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

3rd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

 

 Where a Matt finish is required substitute 2nd & 3rd coats with:

 2nd coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 3rd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where a standard acrylic Low Sheen finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

3rd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

Where a standard acrylic Semi-Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

Environmental Exterior brick - existing
4.41
EXISTING EXTERIOR PAINTED BRICK

Surface Prep:

Resene SIPDS No3 and Spec Sheet 3:2/3

Spot Prime:

Resene Concrete Primer D405, Acrylic Concrete Primer

1st coat:

Resene Lumbersider, Low Sheen Acrylic

2nd coat:

Resene Lumbersider, Low Sheen Acrylic

Note: If substrate is friable/powdery or efflorescence is present substitute Resene Concrete Primer with Resene Sureseal D42, Solvent borne pigment sealer (NEC)

 

 Where a Matt finish is required substitute 1st & 2nd coats with:

 1st coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 2nd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where an acrylic weathertight membrane is required substitute 1st & 2nd coats with:

1st coat:

Resene X-200 D62, Acrylic Weathertight Membrane

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

 

Where an acrylic Semi-Gloss finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

4.42
EXISTING EXTERIOR UNPAINTED BRICK

Surface Prep:

Resene SIPDS No3 and Spec Sheet 5:2/2

1st coat:

Resene Concrete Primer D405, Acrylic Concrete Primer

2nd coat:

Resene Lumbersider, Low Sheen Acrylic

3rd coat:

Resene Lumbersider, Low Sheen Acrylic

Note: If substrate is friable/powdery or efflorescence is present substitute Resene Concrete Primer with Resene Sureseal D42, Solvent borne pigment sealer (NEC)

 

Where an acrylic weathertight membrane is required substitute 2nd & 3rd coats with:

2nd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

3rd coat:

Resene X-200 D62, Acrylic Weathertight Membrane

 

Where an acrylic Semi-Gloss finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

3rd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

Environmental PVC gutters and downpipes - new
4.43
NEW EXTERIOR PVC GUTTERING, DOWNPIPES - PAINT

Surface Prep:

Resene SIPDS No5 and Spec Sheet 5: 1/1

Primer:

Not required

1st coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

Where Low Sheen finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Lumbersider D34, Low Sheen Acrylic

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

 

 Where a Matt finish is required substitute 1st & 2nd coats with:

 1st coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 2nd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered.  Refer to the Resene Website for more information. www.resene.co.nz/coolcolour.

Environmental PVC gutters and downpipes - existing
4.44
EXISTING EXTERIOR PVC GUTTERING, DOWNPIPES - PAINT

Surface Prep:

Resene SIPDS No5 and Spec Sheet 5: 1/3

Spot Prime:

Resene Quick Dry D45, Acrylic Primer Undercoat

1st coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

2nd coat:

Resene Sonyx 101 D30, Semi-Gloss Acrylic

 

 Where a Matt finish is required substitute 1st & 2nd coats with:

 1st coat:                                       Resene Lumbersider Matt D327, Waterborne Matt

 2nd coat:                                        Resene Lumbersider Matt D327, Waterborne Matt

 

Where Low Sheen finish is required substitute 1st & 2nd coats with:

1st coat:

Resene Lumbersider D34, Low Sheen Acrylic

2nd coat:

Resene Lumbersider D34, Low Sheen Acrylic

Note: Where dark colours are selected the use of Resene Cool Colour Technology should be considered.  Refer to the Resene Website for more information. www.resene.co.nz/coolcolour.

Environmental exterior metal - new
4.45
NEW EXTERIOR GALVANIZED/ZINC COATED STEEL - PAINT

Surface Prep:

Resene SIPDS No4 and Spec Sheet 4: 2/1

1st coat

Resene Galvo-Prime D402, Waterborne Galvanised Primer (NEC)

2nd coat:

Resene Lustacryl D310, Semi-Gloss waterborne enamel

3rd coat:

Resene Lustacryl D310, Semi-Gloss waterborne enamel

Note: This section includes single pack decorative coatings only

 

Where a waterborne Gloss Enamel finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Enamacryl D309, Gloss waterborne enamel

3rd coat:

Resene Enamacryl D309, Gloss waterborne enamel

For Resene High Performance 2 pack type systems refer to MasterSpec 6745R.

Environmental exterior metal - existing
4.46
EXISTING EXTERIOR GALVANIZED/ZINC COATED STEEL - PAINT

Surface Prep:

Resene SIPDS No4 and Spec Sheet 4: 2/3

Spot Prime:

Resene GP Metal Primer D411, Solvent borne Modified Alkyd (NEC)

1st coat

Resene Quick Dry D45, Waterborne Acrylic Primer Undercoat

2nd coat:

Resene Lustacryl D310, Semi-Gloss waterborne enamel

3rd coat:

Resene Lustacryl D310, Semi-Gloss waterborne enamel

Note 01: this section assumes steel is painted

Note 02: This section includes single pack decorative coatings only

 

Where a waterborne Gloss Enamel finish is required substitute 2nd & 3rd coats with:

2nd coat:

Resene Enamacryl D309, Gloss waterborne enamel

3rd coat:

Resene Enamacryl D309, Gloss waterborne enamel

For Resene High Performance 2 pack type systems refer to MasterSpec 6745R.