6711D

DULUX PAINTING EXTERIOR

GENERAL

If you have pre-customised this work section using the "questions and answers" provided as part of the downloading process, it may be necessary to amend some clauses to suit the final project-specific version.

The section must still be checked and customised to suit the project being specified, by removing any other irrelevant details and adding project-specific details and selections.

This section relates to the surface preparation and painting of new and existing exterior substrates using Dulux exterior paint systems.

Modify or extend the above description to suit the project being specified.

This 6711D DULUX PAINTING EXTERIOR section is intended to be combined as appropriate with 6700D DULUX PAINTING GENERAL and any selection of the other 5 work sections listed below, and they collectively comprise painting work:

6721D DULUX PAINTING INTERIOR
6711DE DULUX ENVIRONMENTAL PAINTING EXTERIOR
6721DE DULUX ENVIRONMENTAL PAINTING INTERIOR
6742DI DULUX FIRETEX INTUMESCENT COATINGS - STEELWORK
6744DP DULUX PROTECTIVE COATINGS

For specific technical information call Dulux customer services on 0800 800 424 or access DuSpec+, web-based specification site www.duspecplus.co.nz.

1.1

RELATED WORK

Refer to 6700D DULUX PAINTING GENERAL for general matters related to painting work.

Include cross references to other sections where these contain related work. Other related sections could be: 6711DE DULUX ENVIRONMENTAL PAINTING EXTERIOR for environmental paint systems, 6742DI DULUX FIRETEX INTUMESCENT COATINGS - STEELWORK for intumescent coatings, and 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

PRODUCTS

2.1

PRODUCTS

Refer to 6700D DULUX PAINTING GENERAL for product clauses.

Modify or extend, including adding clauses to this section where product information relates exclusively to interior painting.

EXECUTION

3.1

EXECUTION

Refer to 6700D DULUX PAINTING GENERAL for execution clauses.

Modify or extend, including adding clauses to this section where product information relates exclusively to interior painting.

SELECTIONS

For further details on selections go to www.dulux.co.nz/specifier.

Substitutions are not permitted to the following, unless stated otherwise.

SELECTIONS is for providing details of the actual selections to be included in the contract works including colours and other information necessary to ensure that the correct materials are supplied and installed

Customise the attached schedules or substitute a schedule prepared using the DuSpec+ system.

The following selections highlights Dulux products that have the environment in mind and use Dulux's best water-based systems available. Noted as Best Environmental System.

Refer to DULUX DuSpec+ for up-to-date VOC levels as these are subject to change.

4.1

BACK PAINTING SCHEDULE

Paint 2 coats (including any pre-prime) to match exposed face coating.

Cladding type	Extent of back painting
~	~

Amend to suit project requirements

Extent options:	To cladding manufacturer's requirements
	Bottom edge & 150mm up
	Paint whole back, bottom & concealed edges of cladding
	Paint cladding under trim before fixing
	Paint whole back, bottom & concealed edges of trim

Note;

Some pre-finished cladding may still need back painting.

Paint, stain and clear finishes can have different sorts of requirements.

Masonry and cementitious substrates - new walls

4.2

EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - WALLS - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU02210
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L
3rd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00677
Low Sheen	DuSpec+ NZDU03759
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02622
Gloss	DuSpec+ NZDU01791

Dulux Weathershield is self priming, and the primer coat can be replaced with another coat of Weathershield (excludes Extra Bright Base and some coloured bases).

Best Environmental System

4.3

EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - HIGH BUILD 180 MICRON DFT

Gloss level:	Matt
Coating type:	Water-based high build
System:	DuSpec+ NZAC00549
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX AcraTex AcraPrime 501/1 Water-based @ 10 m²/L
2nd coat:	DULUX AcraTex AcraShield Advance @ 6 m²/L
3rd coat:	DULUX AcraTex AcraShield Advance @ 6 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Gloss	DuSpec+ NZAC00612

For cementitious surfaces that have had less than 28 days curing Dulux recommend the use of AcraTex Green Render Sealer rather than AcraPrime 501/1.

Best Environmental System

180 microns meets CCANZ guidelines

4.4

EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - HIGH BUILD 270 MICRON DFT

Gloss level:	Matt
Coating type:	Water-based high build
System:	DuSpec+ NZAC00686
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX AcraTex AcraPrime 501/1 Water-based @ 10 m²/L
2nd coat:	DULUX AcraTex 968 Elastomeric 201 @ 4 m²/L
3rd coat:	DULUX AcraTex 968 Elastomeric 201 @ 4 m²/L

For cementitious surfaces that have had less than 28 days of curing, Dulux recommends using AcraTex Green Render Sealer rather than AcraPrime 501/1.

Best Environmental System

270 microns meets CCANZ guidelines

4.5

EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - WALLS - WATER-REPELLENT SYSTEM

Gloss level:	Matt
Coating type:	Penetrating hydrophobic silane-siloxane surface treatment
System:	Nitocote SN502 \| Fosroc
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	Nitocote SN502
2nd coat:	Nitocote SN502
Details:	The protective coating is to be applied in two flood coats until the recommended total application rate of 0.4 litres / m² is achieved.

Nitocote SN502 penetrates substrate so no DFT applies. Concrete Plus is the licensed distributor of Fosroc in New Zealand, part of DuluxGroup.

4.6

EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - WALLS - WATER-BASED CLEAR

Gloss level:	Semi-Gloss
Coating type:	Water-based clear
System:	DuSpec+ NZAV00044
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX Avista Concrete Sealer Water-based Semi-Gloss @ 5-10 m²/L
2nd coat:	DULUX Avista Concrete Sealer Water-based Semi-Gloss @ 5-10 m²/L

4.7

EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - WALLS - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00051
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	MAXIPROOF (Gloss) @ 8 m²/L
2nd coat:	MAXIPROOF (Gloss) @ 8 m²/L
3rd coat:	MAXIPROOF (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00082

4.8

EXTERIOR MASONRY NEW - WALLS - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU01940
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L
3rd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00676
Low Sheen	DuSpec+ NZDU03760
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02624
Gloss	DuSpec+ NZDU01795

Dulux Weathershield is self priming, and the primer coat can be replaced with another coat of Weathershield (excludes Extra Bright Base and some coloured bases).

Best Environmental System

Note: this system does not meet CCANZ guidelines

4.9

EXTERIOR MASONRY NEW - WALLS - HIGH BUILD 180 MICRON DFT

Gloss level:	Matt
Coating type:	Water-based high build
System:	DuSpec+ NZAC00415
1st coat:	DULUX AcraTex Green Render Sealer @ 8 m²/L
2nd coat:	DULUX AcraTex AcraShield Advance @ 6 m²/L
3rd coat:	DULUX AcraTex AcraShield Advance @ 6 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Gloss	DuSpec+ NZAC00608

For cementitious surfaces that have had less than 28 days curing Dulux recommend the use of AcraTex Green Render Sealer rather than AcraPrime 501/1

Best Environmental System

180 microns meets CCANZ guidelines

4.10

EXTERIOR MASONRY NEW - WALLS - HIGH BUILD 270 MICRON DFT

Gloss level:	Matt
Coating type:	Water-based high build
System:	DuSpec+ NZAC00691
1st coat:	DULUX AcraTex AcraPrime 501/1 Water-based @ 10 m²/L
2nd coat:	DULUX AcraTex 968 Elastomeric 201 @ 4 m²/L
3rd coat:	DULUX AcraTex 968 Elastomeric 201 @ 4 m²/L

For cementitious surfaces that have had less than 28 days curing Dulux recommend the use of AcraTex Green Render Sealer rather AcraPrime 501/1.

Best Environmental System

270 microns meets CCANZ guidelines

4.11

EXTERIOR MASONRY NEW - WALLS - WATER-REPELLENT SYSTEM

Gloss level:	Matt
Coating type:	Penetrating hydrophobic silane-siloxane surface treatment
System:	Nitocote SN502 \| Fosroc
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	Nitocote SN502
2nd coat:	Nitocote SN502
Details:	The protective coating is to be applied in two flood coats until the recommended total application rate of 0.4 litres / m² is achieved

Nitocote SN502 penetrates substrate so no DFT applies. Concrete Plus is the licensed distributor of Fosroc in New Zealand, part of DuluxGroup.

4.12

EXTERIOR MASONRY NEW - WALLS - WATER-BASED CLEAR

Gloss level:	Semi-Gloss
Coating type:	Water-based clear
System:	Duspec+ NZAV00045
1st coat:	DULUX Avista Concrete Sealer Water-based Semi-Gloss @ 5-10 m²/L
2nd coat:	DULUX Avista Concrete Sealer Water-based Semi-Gloss @ 5-10 m²/L

4.13

EXTERIOR MASONRY NEW - WALLS - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00031
1st coat:	MAXIPROOF Gloss) @ 8 m²/L
2nd coat:	MAXIPROOF (Gloss) @ 8 m²/L
3rd coat:	MAXIPROOF (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00071

Masonry and cementitious substrates - new areas, foot traffic

4.14

EXTERIOR CONCRETE NEW - FOOT TRAFFIC - PAINT

Gloss level:	Satin
Coating type:	Water-based
System:	DuSpec+ NZDU04457
1st coat:	DULUX Concrete & Paving Stage 1 Bare Concrete Etch & Clean Cleaner
2nd coat:	DULUX Concrete & Paving Stage 2 Bare Concrete Primer @ 19 m²/L
3rd coat:	DULUX Concrete & Paving Stage 3 Coloured Sealer Satin @ 10 m²/L
4th coat:	DULUX Concrete & Paving Stage 3 Coloured Sealer Satin @ 10 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU04644

4.15

EXTERIOR CONCRETE NEW - FOOT TRAFFIC - NON-SLIP PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU04629
1st coat:	DULUX Concrete & Paving Stage 1 Bare Concrete Etch & Clean Cleaner
2nd coat:	DULUX Concrete & Paving Stage 2 Bare Concrete Primer @ 10 m²/L
3rd coat:	DULUX Concrete & Paving Stage 2 Bare Concrete Primer @ 10 m²/L
4th coat:	DULUX Concrete & Paving Stage 3 Super Grip Finish @ 10 m²/L
5th coat:	DULUX Concrete & Paving Stage 3 Super Grip Finish @ 10 m²/L

4.16

EXTERIOR CONCRETE NEW - FOOT TRAFFIC - WATER-BASED CLEAR

Gloss level:	Matt
Coating type:	Water-based clear
System:	DuSpec+ NZDU04653
1st coat:	DULUX Concrete & Paving Stage 1 Bare Concrete Etch & Clean Cleaner
2nd coat:	DULUX Concrete & Paving Clear Protective Sealer Matt @ 6 m²/L
3rd coat:	DULUX Concrete & Paving Clear Protective Sealer Matt @ 6 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Satin	DuSpec+ NZDU04654

4.17

EXTERIOR CONCRETE NEW - FOOT TRAFFIC - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00009
1st coat:	MAXIPROOF (Gloss) @ 8 m²/L
2nd coat:	MAXIPROOF (Gloss) @ 8 m²/L
3rd coat:	MAXIPROOF (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00064

Masonry and cementitious substrates - new areas, vehicle traffic

4.18

EXTERIOR CONCRETE NEW - RESIDENTIAL VEHICLE TRAFFIC SOLVENT-BASED

Gloss level:	Semi-Gloss
Coating type:	Solvent-based
System:	DuSpec+ NZDU04657
1st coat:	DULUX Avista Concrete Sealer Pre-Sealer
2nd coat:	DULUX Avista Concrete Sealer Coloured Semi-Gloss @ 4 m²/L
3rd coat:	DULUX Avista Concrete Sealer Coloured Semi-Gloss @ 4 m²/L

Add DULUX Avista Slip Reducing Additive Crushed Glass Coarse for a slip resistant coating.

4.19

EXTERIOR CONCRETE NEW - VEHICLE TRAFFIC - HEAVY DUTY PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based acrylic polyurethane
System:	DuSpec+ NZDU03546
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Durebild STE @ 125 microns DFT
3rd coat:	DULUX Weathermax HBR @ 100 microns DFT

Fibre cement sheet substrates - new cladding

4.20

EXTERIOR FIBRE CEMENT SHEET NEW - CLADDING - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU01929
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L
3rd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Sheen	DuSpec+ NZDU03758
Gloss	DuSpec+ NZDU01898
ColourGuard Low Sheen	DuSpec+ NZDU00757

Dulux Weathershield is self priming, and the primer coat can be replaced with another coat of Weathershield (excludes Extra Bright Base and some coloured bases).

Best Environmental System

4.21

EXTERIOR FIBRE CEMENT SHEET NEW - CLADDING - HIGH BUILD

Gloss level:	Matt
Coating type:	Water-based high build
System:	DuSpec+ NZAC00847
1st coat:	DULUX AcraTex AcraPrime 501/1 Water-based @ 10 m²/L
2nd coat:	DULUX AcraTex AcraShield Advance @ 6 m²/L
3rd coat:	DULUX AcraTex AcraShield Advance @ 6 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Gloss	DuSpec+ NZAC00619

4.22

EXTERIOR FIBRE CEMENT SHEET NEW - CLADDING - CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZDU04397
1st coat:	MAXIPROOF (Gloss) @ 8 m²/L
2nd coat:	MAXIPROOF (Gloss) @ 8 m²/L
3rd coat:	MAXIPROOF (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Other	DuSpec+ NZMA00059

Timber substrates - new cladding

4.23

EXTERIOR TIMBER NEW - CLADDING - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU01979
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer Undercoat @ 14m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L
3rd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00683
Low Sheen	DuSpec+ NZDU03765
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02632
Gloss	DuSpec+ NZDU01869
ColourGuard Low Sheen	DuSpec+ NZDU00758

Dulux Weathershield is self priming, and the primer coat can be replaced with another coat of Weathershield (excludes Extra Bright Base and some coloured bases).

Best Environmental System

4.24

EXTERIOR CEDAR NEW - CLADDING - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU02200
1st coat:	DULUX 1 Step Oil-based Primer Sealer & Undercoat @ 16 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L
3rd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00681
Low Sheen	DuSpec+ NZDU03766
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02618
Gloss	DuSpec+ NZDU01775
ColourGuard Low Sheen	DuSpec+ NZDU00762

4.25

EXTERIOR TIMBER NEW - CLADDING - WATER-BASED STAIN

Gloss level:	Matt
Coating type:	Water-based stain
System:	DuSpec+ NZIN00098
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	INTERGRAIN NaturalStain @ 9 m²/L
2nd coat:	INTERGRAIN NaturalStain @ 9 m²/L
3rd coat:	INTERGRAIN NaturalStain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Best Environmental System

4.26

EXTERIOR TIMBER NEW - CLADDING - SOLVENT-BASED STAIN

Gloss level:	Matt
Coating type:	Solvent-based oil
System:	DuSpec+ NZCA00133
Preparation:	CABOT'S Deck Clean @ 12-16 m²/L
1st coat:	CABOT'S Deck & Exterior Stain Oil-based
2nd coat:	CABOT'S Deck & Exterior Stain Oil-based
3rd coat:	CABOT'S Deck & Exterior Stain Oil-based (optional)

Use the appropriate number of coats required to achieve the desired depth of colour

Timber substrates - new trim, doors, frames, etc

4.27

EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - WATER-BASED ENAMEL

Gloss level:	Semi-Gloss
Coating type:	Water-based enamel
System:	DuSpec+ NZDU01192
1st coat::	DULUX 1 Step Prep Acrylic Primer Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX Aquanamel @ 16 m²/L
3rd coat:	DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZDU02449

Best Environmental System

4.28

EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - SOLVENT-BASED ENAMEL

Gloss level:	Gloss
Coating type:	Solvent-based enamel
System:	DuSpec+ NZDU03770
1st coat::	DULUX 1 Step Prep Acrylic Primer Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX Super Enamel @ 16.1 m²/L
3rd coat:	DULUX Super Enamel @ 16.1 m²/L

4.29

EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00032
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	MAXIPROOF (Gloss) @ 8 m²/L
2nd coat:	MAXIPROOF (Gloss) @ 8 m²/L
3rd coat:	MAXIPROOF (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Other	DuSpec+ NZMA00072

4.30

EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - WATER-BASED STAIN

Gloss level:	Matt
Coating type:	Water-based stain
System:	DuSpec+ NZIN00098
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	INTERGRAIN NaturalStain @ 9 m²/L
2nd coat:	INTERGRAIN NaturalStain @ 9 m²/L
3rd coat:	INTERGRAIN NaturalStain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Best Environmental System

4.31

EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - SOLVENT-BASED STAIN

Gloss level:	Matt
Coating type:	Water-based stain
System:	DuSpec+ NZCA00133
Preparation:	CABOT'S Deck Clean @ 12-16 m²/L
1st coat:	CABOT'S Deck & Exterior Stain Oil-based
2nd coat:	CABOT'S Deck & Exterior Stain Oil-based
3rd coat:	CABOT'S Deck & Exterior Stain Oil-based (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Timber substrates - new fences, pergolas, etc

4.32

EXTERIOR TIMBER NEW - FENCES AND PERGOLAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU01341
Preparation:	CABOT'S Deck Clean @ 12-16 m²/L
1st coat:	DULUX Timbacryl @ 16.4 m²/L
2nd coat:	DULUX Timbacryl @ 16.4 m²/L
3rd coat:	DULUX Timbacryl @ 16.4 m²/L

Best Environmental System

4.33

EXTERIOR TIMBER NEW - FENCES AND PERGOLAS - WATER-BASED STAIN

Gloss level:	Matt
Coating type:	Water-based stain
System:	DuSpec+ NZIN00098
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	INTERGRAIN NaturalStain @ 9 m²/L
2nd coat:	INTERGRAIN NaturalStain @ 9 m²/L
3rd coat:	INTERGRAIN NaturalStain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour

Best Environmental System

4.34

EXTERIOR TIMBER NEW - FENCES AND PERGOLAS - SOLVENT-BASED STAIN

Gloss level:	Matt
Coating type:	Solvent-based stain
System:	DuSpec+ NZCA00133
Preparation:	CABOT'S Deck Clean @ 12-16 m²/L
1st coat:	CABOT'S Deck & Exterior Stain Oil-based @ 10 m²/L
2nd coat:	CABOT'S Deck & Exterior Stain Oil-based @ 10 m²/L
3rd coat:	CABOT'S Deck & Exterior Stain Oil-based @ 10 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour

Timber substrates - new decks

4.35

EXTERIOR TIMBER NEW - DECKS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU01341
1st coat:	DULUX Timbacryl @ 16.4 m²/L
2nd coat:	DULUX Timbacryl @ 16.4 m²/L
3rd coat:	DULUX Timbacryl @ 16.4 m²/L

Best Environmental System

4.36

EXTERIOR TIMBER NEW - DECKS - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00032
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	MAXIPROOF (Gloss) @ 8 m²/L
2nd coat:	MAXIPROOF (Gloss) @ 8 m²/L
3rd coat:	MAXIPROOF (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00072

This system is to be used for soffits only

4.37

EXTERIOR TIMBER NEW - DECKS - NATURAL OIL

Gloss level:	Matt
Coating type:	Solvent-based oil
System:	DuSpec+ NZIN00145
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	INTERGRAIN Nature's Timber Oil @ 8.3 m²/L
2nd coat:	INTERGRAIN Nature's Timber Oil @ 8.3 m²/L

4.38

EXTERIOR TIMBER NEW - DECKS - WATER-BASED STAIN

Gloss level:	Matt
Coating type:	Water-based stain
System:	DuSpec+ NZIN00110
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	INTERGRAIN UltraDeck Timber Oil @ 12 m²/L
2nd coat:	INTERGRAIN UltraDeck Timber Oil @ 12 m²/L
3rd coat:	INTERGRAIN UltraDeck Timber Oil @ 12 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Best Environmental System

4.39

EXTERIOR TIMBER NEW - DECKS - WATER-BASED STAIN

Gloss level:	Matt
Coating type:	Water-based stain
System:	DuSpec+ NZIN00103
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L
2nd coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L
3rd coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Best Environmental System

4.40

EXTERIOR TIMBER NEW - DECKS - SOLVENT-BASED STAIN

Gloss level:	Matt
Coating type:	Solvent-based stain
System:	DuSpec+ NZCA00133
Preparation:	CABOT'S Deck Clean @ 12-16 m²/L
1st coat:	CABOT'S Deck & Exterior Stain Oil-based @ 10 m²/L
2nd coat:	CABOT'S Deck & Exterior Stain Oil-based @ 10 m²/L
3rd coat:	CABOT'S Deck & Exterior Stain Oil-based @ 10 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Plastic substrates - new

4.41

EXTERIOR PLASTIC NEW - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU02147
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L
3rd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00682
Low Sheen	DuSpec+ NZDU03764
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02626
Gloss	DuSpec+ NZDU01811
ColourGuard Low Sheen	DuSpec+ NZDU00752

Dulux Weathershield is self priming, and the primer coat can be replaced with another coat of Weathershield (excludes Extra Bright Base and some coloured bases).

Best Environmental System

Metal substrates - new

4.42

EXTERIOR METAL ROOF NEW - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU01487
1st coat:	DULUX Roof & Trim @ 16 m²/L
2nd coat:	DULUX Roof & Trim @ 16 m²/L
3rd coat:	DULUX Roof & Trim @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZDU01631

Excludes decramastic finishes.

Best Environmental System

4.43

EXTERIOR MILD STEEL NEW - DECORATIVE PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based zinc primer + water-based topcoat
System:	DuSpec+ NZDU02009
1st coat:	DULUX Precision All Metal Primer @ 14.8 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L
3rd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00689
Low Sheen	DuSpec+ NZDU03775
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02636
Gloss	DuSpec+ NZDU01857

Best Environmental System

4.44

EXTERIOR MILD STEEL NEW - LIGHT INDUSTRIAL COATING

Gloss level:	Gloss
Coating type:	Solvent-based zinc phosphate primer + solvent-based enamel
System:	DuSpec+ NZDU02261
1st coat:	DULUX Metalshield All Surface Primer @ 15 m²/L
2nd coat:	DULUX Metalshield FD Enamel @ 8.5 m²/L
3rd coat:	DULUX Metalshield FD Enamel @ 8.5 m²/L

4.45

EXTERIOR MILD STEEL NEW - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based zinc phosphate epoxy primer+ two pack solvent-based acrylic polyurethane
System:	DuSpec+ NZDU03551
1st coat	DULUX Duremax GPE ZP @ 150 microns DFT
2nd coat:	DULUX Weathermax HBR @ 100 microns DFT

4.46

EXTERIOR MILD STEEL NEW - PROTECTIVE COATING - METALLIC FINISH

Gloss level:	Gloss
Coating type:	Two pack solvent-based zinc phosphate epoxy primer+ two pack solvent-based metallic polyurethane + two pack solvent-based acrylic clear polyurethane
System:	DuSpec+ NZDU00651
1st coat:	DULUX Duremax GPE ZP @ 150 microns DFT
2nd coat:	DULUX Quantum FX @ 55 microns DFT
3rd coat:	DULUX Quantum Clearcoat @ 45 microns DFT

For full protective coating systems view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

4.47

EXTERIOR GALVANIZED NEW - WATER-BASED DECORATIVE PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU02191
1st coat:	DULUX Precision All Metal Primer @ 14.8 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L
3rd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00679
Low Sheen	DuSpec+ NZDU03776
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02617
Gloss	DuSpec+ NZDU01777

Best Environmental System

4.48

EXTERIOR GALVANIZED NEW - LIGHT INDUSTRIAL COATING

Gloss level:	Gloss
Coating type:	Solvent-based zinc phosphate primer + solvent-based enamel
System:	DuSpec+ NZDU02264
1st coat:	DULUX Metalshield All Surface Primer @ 15 m²/L
2nd coat:	DULUX Metalshield FD Enamel @ 8.5 m²/L
3rd coat:	DULUX Metalshield FD Enamel @ 8.5 m²/L

4.49

EXTERIOR GALVANIZED NEW - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based zinc phosphate epoxy primer + two pack solvent-based acrylic polyurethane
System:	DuSpec+ NZDU03611
1st coat:	DULUX Duremax GPE ZP @ 150 microns DFT
2nd coat:	DULUX Weathermax HBR @ 100 microns DFT

For full protective coating systems view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

4.50

EXTERIOR GALVANIZED NEW - PROTECTIVE COATING - METALLIC FINISH

Gloss level:	Gloss
Coating type:	Two pack solvent-based zinc phosphate epoxy primer+ two pack solvent-based metallic polyurethane + two pack solvent-based acrylic clear polyurethane
System:	DuSpec+ NZDU00661
1st coat:	DULUX Duremax GPE ZP @ 150 microns DFT
2nd coat:	DULUX Quantum FX @ 55 microns DFT
3rd coat:	DULUX Quantum Clearcoat @ 45 microns DFT

For full protective coating systems view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

4.51

EXTERIOR NON-FERROUS METAL NEW - WALLS - DECORATIVE PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU02000
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L
3rd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00688
Low Sheen	DuSpec+ NZDU03774
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02635
Gloss	DuSpec+ NZDU01861

Best Environmental System

4.52

EXTERIOR NON-FERROUS METAL NEW - DOORS, TRIMS AND FRAMES - DECORATIVE PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based enamel
System:	DuSpec+ NZDU01176
1st coat:	DULUX 1 Step Acrylic Primer Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX Aquanamel @ 16m²/L
3rd coat:	DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZDU02465

Best Environmental System

4.53

EXTERIOR NON-FERROUS NEW - LIGHT INDUSTRIAL COATING

Gloss level:	Gloss
Coating type:	Solvent-based zinc phosphate primer + solvent-based enamel
System:	DuSpec+ NZDU02259
1st coat:	DULUX Metalshield RFU Etch Primer @ 8 m²/L
2nd coat:	DULUX Metalshield FD Enamel @ 8.5 m²/L
3rd coat:	DULUX Metalshield FD Enamel @ 8.5 m²/L

4.54

EXTERIOR NON-FERROUS METAL NEW - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based acrylic polyurethane
System:	DuSpec+ NZDU03552
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Weathermax HBR @ 100 microns DFT

Suitable for previously powdercoated surfaces. See DuSpec+ for substrate preparation information.

For full protective coating systems view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

4.55

EXTERIOR NON-FERROUS METAL NEW - PROTECTIVE COATING - METALLIC FINISH

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based metallic polyurethane + two pack solvent-based acrylic clear polyurethane
System:	DuSpec+ NZDU00652
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Quantum FX @ 55 microns DFT
3rd coat:	DULUX Quantum Clearcoat @ 45 microns DFT

For full protective coating systems view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

Anti-graffiti - non sacrificial

4.56

ANTI-GRAFFITI OVER BARE SUBSTRATE (EXCL TILT UP) - SINGLE PACK CLEAR

Gloss level:	Gloss
Coating type:	Anti-graffiti coating
System:	DuSpec+ NZDU01563
1st coat:	DULUX Precision Anti-graffiti @ 16 m²/L
2nd coat:	DULUX Precision Anti-graffiti @ 16 m²/L

If painting over glossy, metal, glass, Colorbond, Colorsteel or powder coated surfaces use DULUX Precision Anti-graffiti Wash Primer prior to first coat.

For DULUX Precision Anti-graffiti coating to be removable the substrate cannot be bare and must be painted prior to applying DULUX Precision Anti-graffiti coating.

For full protective coating systems including further anti-graffiti options, view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

4.57

ANTI-GRAFFITI OVER TILT-UP, PRECAST & OFF THE FORM CONCRETE- SINGLE PACK CLEAR

Gloss level:	Gloss
Coating type:	Anti-graffiti coating
System:	DuSpec+ NZDU01561
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX Precision Anti-graffiti @ 16 m²/L
2nd coat:	DULUX Precision Anti-graffiti @ 16 m²/L

If painting over glossy, metal, glass, Colorbond, Colorsteel or powder coated surfaces use DULUX Precision Anti-graffiti Wash Primer prior to first coat.

For DULUX Precision Anti-graffiti coating to be removable the substrate cannot be bare and must be painted prior to applying DULUX Precision Anti-graffiti coating.

For full protective coating systems including further anti-graffiti options, view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

4.58

ANTI-GRAFFITI OVER NEWLY PAINTED - SINGLE PACK CLEAR

Gloss level:	Gloss
Coating type:	Anti-graffiti coating
System:	DuSpec+ NZDU01562
1st coat:	DULUX Precision Anti-graffiti @ 16 m²/L
2nd coat:	DULUX Precision Anti-graffiti @ 16 m²/L

If painting over glossy, metal, glass, Colorbond, Colorsteel or powder coated surfaces use DULUX Precision Anti-graffiti Wash Primer prior to first coat.

For DULUX Precision Anti-graffiti coating to be removable the substrate cannot be bare and must be painted prior to applying DULUX Precision Anti-graffiti coating.

For full protective coating systems including further anti-graffiti options, view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

4.59

ANTI-GRAFFITI OVER EXISTING COATING - SINGLE PACK CLEAR

Gloss level:	Gloss
Coating type:	Anti-graffiti coating
System:	DuSpec+ NZDU01557
1st coat:	DULUX Precision Anti-graffiti @ 16 m²/L
2nd coat:	DULUX Precision Anti-graffiti @ 16 m²/L

If painting over glossy, metal, glass, Colorbond, Colorsteel or powder coated surfaces use DULUX Precision Anti-graffiti Wash Primer prior to first coat.

For DULUX Precision Anti-graffiti coating to be removable the substrate cannot be bare and must be painted prior to applying DULUX Precision Anti-graffiti coating.

For full protective coating systems including further anti-graffiti options, view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

4.60

ANTI-GRAFFITI OVER EXISTING COATING - PIGMENTED GLOSS

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based acrylic polyurethane
System:	DuSpec+ NZDU03544
Preparation:	DULUX Prep Wash @ 6 m²/L
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Weathermax HBR @ 100 microns DFT

For full protective coating systems including further anti-graffiti options, view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

Masonry and cementitious substrates - existing walls

4.61

EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE EXISTING - WALLS - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU01977
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Weathershield @ 16 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00678
Low Sheen	DuSpec+ NZDU03762
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02623
Gloss	DuSpec+ NZDU01792
ColourGuard Low Sheen	DuSpec+ NZDU00749

Dulux Weathershield is self priming, and the primer coat can be replaced with another coat of Weathershield (excludes Extra Bright Base and some coloured bases).

Best Environmental System

4.62

EXTERIOR TILT-UP, PRECAST & OFF FORM CONCRETE EXISTING - HIGH BUILD 180 MICRON DFT

Gloss level:	Matt
Coating type:	Water-based high build
System:	DuSpec+ NZAC00409
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX AcraTex AcraPrime 501/1 Water-based @ 10 m²/L
1st coat:	DULUX AcraTex AcraShield Advance @ 6 m²/L
2nd coat:	DULUX AcraTex AcraShield Advance @ 6 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Gloss	DuSpec+ NZAC00611

Best Environmental System

180 microns meets CCANZ guidelines

4.63

EXTERIOR TILT-UP, PRECAST & OFF FORM CONCRETE EXISTING - HIGH BUILD 270 MICRON DFT

Gloss level:	Matt
Coating type:	Water-based high build
System:	DuSpec+ NZAC00687
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX AcraTex AcraPrime 501/1 Water-based @ 10 m²/L
1st coat:	DULUX AcraTex 968 Elastomeric 201 @ 4 m²/L
2nd coat:	DULUX AcraTex 968 Elastomeric 201 @ 4 m²/L

Best Environmental System

270 microns meets CCANZ guidelines

4.64

EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE EXISTING - WALLS - CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00052
Preparation:	DULUX Prep Wash @ 6 m²/L
1st coat:	MAXIPROOF (Gloss) @ 8 m²/L
2nd coat:	MAXIPROOF (Gloss) @ 8 m²/L
3rd coat:	MAXIPROOF (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00083

4.65

EXTERIOR MASONRY EXISTING - WALLS - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU02035
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Weathershield @ 16 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00691
Low Sheen	DuSpec+ NZDU03761
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02634
Gloss	DuSpec+ NZDU01849
ColourGuard Low Sheen	DuSpec+ NZDU00761

Dulux Weathershield is self priming, and the primer coat can be replaced with another coat of Weathershield (excludes Extra Bright Base and some coloured bases).

Best Environmental System

4.66

EXTERIOR MASONRY EXISTING - WALLS - HIGH BUILD 180 MICRON DFT

Gloss level:	Matt
Coating type:	Water-based high build
System:	DuSpec+ NZAC00376
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX AcraTex AcraPrime 501/1 Water-based @ 10 m²/L
1st coat:	DULUX AcraTex AcraShield Advance @ 6 m²/L
2nd coat:	DULUX AcraTex AcraShield Advance @ 6 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Gloss	DuSpec+ NZAC00633

Best Environmental System

180 microns meets CCANZ guidelines

4.67

EXTERIOR MASONRY EXISTING - WALLS - HIGH BUILD 270 MICRON DFT

Gloss level:	Matt
Coating type:	Water-based high build
System:	DuSpec+ NZAC00702
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX AcraTex AcraPrime 501/1 Water-based @ 10 m²/L
1st coat:	DULUX AcraTex 968 Elastomeric 201 @ 4 m²/L
2nd coat:	DULUX AcraTex 968 Elastomeric 201 @ 4 m²/L

Best Environmental System

270 microns meets CCANZ guidelines

4.68

EXTERIOR MASONRY EXISTING - WALLS - CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00028
Preparation:	DULUX Prep Wash @ 6 m²/L
1st coat:	MAXIPROOF(Gloss) @ 8 m²/L
2nd coat:	MAXIPROOF(Gloss) @ 8 m²/L
3rd coat:	MAXIPROOF(Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00074

Masonry and cementitious substrates - existing areas, foot traffic

4.69

EXTERIOR CONCRETE EXISTING - FOOT TRAFFIC - PAINT

Gloss level:	Matt
Coating type:	Water-based
System:	DuSpec+ NZDU04406
1st coat:	DULUX Concrete & Paving Stage 1 Sealed Surface Cleaner
2nd coat:	DULUX Concrete & Paving Stage 2 Sealed Surface Primer @ 10 m²/L
3rd coat:	DULUX Concrete & Paving Stage 3 Coloured Sealer Matt @ 10 m²/L
4th coat:	DULUX Concrete & Paving Stage 3 Coloured Sealer Matt @ 10 m²/L

4.70

EXTERIOR CONCRETE EXISTING - FOOT TRAFFIC - NON-SLIP SOLVENT-BASED

Gloss level:	Flat
Coating type:	Solvent-based
System:	DuSpec+ NZDU04630
1st coat:	DULUX Concrete & Paving Stage 1 Sealed Surface Cleaner
2nd coat:	DULUX Concrete & Paving Stage 2 Sealed Surface Primer @ 10 m²/L
3rd coat:	DULUX Concrete & Paving Stage 3 Super Grip Finish @ 10 m²/L
4th coat:	DULUX Concrete & Paving Stage 3 Super Grip Finish @ 10 m²/L

4.71

EXTERIOR CONCRETE EXISTING - FOOT TRAFFIC - WATER-BASED CLEAR

Gloss level:	Satin
Coating type:	Water-based clear
System:	DuSpec+ NZDU04660
1st coat:	DULUX Concrete & Paving Stage 1 Sealed Surface Cleaner
2nd coat:	DULUX Concrete & Paving Clear Protective Sealer Satin @ 5.98 m²/L
3rd coat:	DULUX Concrete & Paving Clear Protective Sealer Satin @ 5.98 m²/L

4.72

EXTERIOR CONCRETE EXISTING - FOOT TRAFFIC - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00053
Preparation:	DULUX Prep Wash @ 6 m²/L
1st coat:	MAXIPROOF (Gloss) @ 8 m²/L
2nd coat:	MAXIPROOF (Gloss) @ 8 m²/L
3rd coat:	MAXIPROOF (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00056

Masonry and cementitious substrates - existing areas, vehicle traffic

4.73

EXTERIOR CONCRETE EXISTING - VEHICLE TRAFFIC - SOLVENT-BASED CLEAR

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based acrylic polyurethane
System:	DuSpec+ NZDU03545
Preparation:	DULUX Prep Wash @ 6 m²/L
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Durebild STE @ 125 microns DFT
3rd coat:	DULUX Weathermax HBR @ 100 microns DFT

Fibre cement sheet substrates - existing cladding

4.74

EXTERIOR FIBRE CEMENT SHEET EXISTING - CLADDING - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU01912
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Weathershield @ 16 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00692
Low Sheen	DuSpec+ NZDU03757
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02631
Gloss	DuSpec+ NZDU01882
ColourGuard Low Sheen	DuSpec+ NZDU00755

Dulux Weathershield is self priming, and the primer coat can be replaced with another coat of Weathershield (excludes Extra Bright Base and some coloured bases).

Best Environmental System

4.75

EXTERIOR FIBRE CEMENT SHEET EXISTING - CLADDING - HIGH BUILD

Gloss level:	Matt
Coating type:	Water-based high build
System:	DuSpec+ NZAC00353
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX AcraTex AcraPrime 501/1 Water-based @ 10 m²/L
1st coat:	DULUX AcraTex AcraShield Advance @ 6 m²/L
2nd coat:	DULUX AcraTex AcraShield Advance @ 6 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Gloss	DuSpec+ NZAC00624

4.76

EXTERIOR FIBRE CEMENT SHEET EXISTING - CLADDING - CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00023
Preparation:	DULUX Prep Wash @ 6 m²/L
1st coat:	MAXIPROOF (Gloss) @ 8 m²/L
2nd coat:	MAXIPROOF (Gloss) @ 8 m²/L
3rd coat:	MAXIPROOF (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00066

Timber substrates - existing cladding

4.77

EXTERIOR TIMBER EXISTING - CLADDING - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU02198
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Weathershield @ 16 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00680
Low Sheen	DuSpec+ NZDU03768
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02619
Gloss	DuSpec+ NZDU01774
ColourGuard Low Sheen	DuSpec+ NZDU00743

Dulux Weathershield is self priming, and the primer coat can be replaced with another coat of Weathershield (excludes Extra Bright Base and some coloured bases).

4.78

EXTERIOR CEDAR EXISTING - CLADDING - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU02080
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX 1 Step Oil-based Primer Sealer & Undercoat @ 16 m²/L
1st coat:	DULUX Weathershield @ 16 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00696
Low Sheen	DuSpec+ NZDU03767
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02630
Gloss	DuSpec+ NZDU01885
ColourGuard Low Sheen	DuSpec+ NZDU00744

4.79

EXTERIOR TIMBER EXISTING - CLADDING - WATER-BASED STAIN

Gloss level:	Matt
Coating type:	Water-based stain
System:	DuSpec+ NZIN00086
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L
2nd coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L
3rd coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour

4.80

EXTERIOR TIMBER EXISTING - CLADDING - SOLVENT-BASED STAIN

Gloss level:	Matt
Coating type:	Solvent-based oil
System:	DuSpec+ NZCA00114
Preparation:	CABOT'S Deck Clean @ 12-16 m²/L
1st coat:	CABOT'S Deck & Exterior Stain Oil-based
2nd coat:	CABOT'S Deck & Exterior Stain Oil-based
3rd coat:	CABOT'S Deck & Exterior Stain Oil-based (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Timber substrates - existing trims, doors, frames, etc

4.81

EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - WATER-BASED ENAMEL

Gloss level:	Semi-Gloss
Coating type:	Water-based enamel
System:	DuSpec+ NZDU01006
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Aquanamel @ 16 m²/L
2nd coat:	DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZDU02385

Best Environmental System

4.82

EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - SOLVENT-BASED ENAMEL

Gloss level:	Gloss
Coating type:	Solvent-based enamel
System:	DuSpec+ NZDU03769
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Super Enamel @ 16.1 m²/L
2nd coat:	DULUX Super Enamel @ 16.1 m²/L

4.83

EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00037
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
Spot prime:	MAXIPROOF (Gloss) @ 8 m²/L
1st coat:	MAXIPROOF (Gloss) @ 8 m²/L
2nd coat:	MAXIPROOF (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00086

4.84

EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - WATER-BASED STAIN

Gloss level:	Matt
Coating type:	Water-based stain
System:	DuSpec+ NZIN00086
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L
2nd coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L
3rd coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Best Environmental System

4.85

EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - SOLVENT-BASED STAIN

Gloss level:	Matt
Coating type:	Solvent-based oil
System:	DuSpec+ NZCA00114
Preparation:	CABOT'S Deck Clean @ 12-16 m²/L
1st coat:	CABOT'S Deck & Exterior Stain Oil-based
2nd coat:	CABOT'S Deck & Exterior Stain Oil-based
3rd coat:	CABOT'S Deck & Exterior Stain Oil-based (optional

Use the appropriate number of coats required to achieve the desired depth of colour.

Timber substrates - existing fences, pergolas, etc

4.86

EXTERIOR TIMBER EXISTING - FENCES AND PERGOLAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU01316
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Timbacryl @ 16.4 m²/L
1st coat:	DULUX Timbacryl @ 16.4 m²/L
2nd coat:	DULUX Timbacryl @ 16.4 m²/L

Best Environmental System

4.87

EXTERIOR TIMBER EXISTING - FENCES AND PERGOLAS - WATER-BASED STAIN

Gloss level:	Matt
Coating type:	Water-based stain
System:	DuSpec+ NZIN00086
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L
2nd coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L
3rd coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L (optional)

Use the appropriate number of coats of INTERGRAIN UltraDeck Timber Stain required to achieve the desired depth of colour.

Best Environmental System

4.88

EXTERIOR TIMBER EXISTING - FENCES AND PERGOLAS - SOLVENT-BASED STAIN

Gloss level:	Matt
Coating type:	Solvent-based oil
System:	DuSpec+ NZCA00114
Preparation:	CABOT'S Deck Clean @ 12-16 m²/L
1st coat:	CABOT'S Deck & Exterior Stain Oil-based @ 10 m²/L
2nd coat:	CABOT'S Deck & Exterior Stain Oil-based @ 10 m²/L
3rd coat:	CABOT'S Deck & Exterior Stain Oil-based @ 10 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour

Timber substrates - existing decks

4.89

EXTERIOR TIMBER EXISTING - DECKS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU01316
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Timbacryl @ 16.4 m²/L
1st coat:	DULUX Timbacryl @ 16.4 m²/L
2nd coat:	DULUX Timbacryl @ 16.4 m²/L

Best Environmental System

4.90

EXTERIOR TIMBER EXISTING - DECKS - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00019
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	MAXIPROOF (Gloss) @ 8 m²/L
2nd coat:	MAXIPROOF (Gloss) @ 8 m²/L
3rd coat:	MAXIPROOF (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00060

This system is to be used for soffits only

4.91

EXTERIOR TIMBER EXISTING - DECKS - NATURAL OIL

Gloss level:	Matt
Coating type:	Solvent-based oil
System:	DuSpec+ NZIN00147
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	NTERGRAIN Nature's Timber Oil @ 8.3 m²/L
2nd coat:	NTERGRAIN Nature's Timber Oil @ 8.3 m²/L

4.92

EXTERIOR TIMBER EXISTING - DECKS - WATER-BASED STAIN

Gloss level:	Matt
Coating type:	Water-based stain
System:	DuSpec+ NZIN00086
Preparation:	INTERGRAIN UltraPrep Timber Cleaner @ up to 10 m²/L
1st coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L
2nd coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L
3rd coat:	INTERGRAIN UltraDeck Timber Stain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Best Environmental System

4.93

EXTERIOR TIMBER EXISTING - DECKS - SOLVENT-BASED STAIN

Gloss level:	Matt
Coating type:	Solvent-based oil
System:	DuSpec+ NZCA00114
Preparation:	CABOT'S Deck Clean @ 12-16 m²/L
1st coat:	CABOT'S Deck & Exterior Stain Oil-based @ 10 m²/L
2nd coat:	CABOT'S Deck & Exterior Stain Oil-based @ 10 m²/L
3rd coat:	CABOT'S Deck & Exterior Stain Oil-based @ 10 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Plastic substrates - existing

4.94

EXTERIOR PLASTIC EXISTING - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU02018
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Weathershield @ 16 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00690
Low Sheen	DuSpec+ NZDU03763
Weathershield Plus Super Hide Low Shield	DuSpec+ NZDU02637
Gloss	DuSpec+ NZDU01856

Dulux Weathershield is self priming, and the primer coat can be replaced with another coat of Weathershield (excludes Extra Bright Base and some coloured bases).

Best Environmental System

Metal substrates - existing

4.95

EXTERIOR METAL ROOF EXISTING - PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU01507
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Precision All Metal Primer @ 14.8 m²/L
1st coat:	DULUX Roof & Trim @ 16 m²/L
2nd coat:	DULUX Roof & Trim @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZDU01622

Excludes decromastic finishes.

Best Environmental System

4.96

EXTERIOR MILD STEEL EXISTING - DECORATIVE PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU02056
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Precision All Metal Primer @ 14.8 m²/L
1st coat:	DULUX Weathershield @ 16 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00687
Low Sheen	DuSpec+ NZDU04075
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02638
Gloss	DuSpec+ NZDU02212
ColourGuard	DuSpec+ NZDU00765

Best Environmental System

4.97

EXTERIOR MILD STEEL EXISTING - LIGHT INDUSTRIAL COATING

Gloss level:	Gloss
Coating type:	Solvent-based enamel
System:	DuSpec+ NZDU02258
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Metalshield All Surface Primer @ 15 m²/L
1st coat:	DULUX Metalshield FD Enamel @ 8.5 m²/L
2nd coat:	DULUX Metalshield FD Enamel @ 8.5 m²/L

4.98

EXTERIOR MILD STEEL EXISTING - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based acrylic polyurethane
System:	DuSpec+ NZDU03548
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Durebild STE @ 125 microns DFT
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Weathermax HBR @ 100 microns DFT

4.99

EXTERIOR MILD STEEL NEW - PROTECTIVE COATING - METALLIC FINISH

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based metallic polyurethane + two pack solvent-based acrylic clear polyurethane
System:	DuSpec+ NZDU00653
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Durebild STE @ 125 microns DFT
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Quantum FX @ 55 microns DFT
3rd coat:	DULUX Quantum Clearcoat @ 45 microns DFT

For full protective coating systems view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

4.100

EXTERIOR GALVANIZED EXISTING - DECORATIVE PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU02218
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Precision All Metal Primer @ 14.8 m²/L
1st coat:	DULUX Weathershield @ 16 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00673
Low Sheen	DuSpec+ NZDU03771
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02625
Gloss	DuSpec+ NZDU01781
ColourGuard Low Sheen	DuSpec+ NZDU00746

Best Environmental System

4.101

EXTERIOR GALVANIZED EXISTING - LIGHT INDUSTRIAL COATING

Gloss level:	Gloss
Coating type:	Solvent-based zinc phosphate primer + solvent-based enamel
System:	DuSpec+ NZDU02266
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Metalshield All Surface Primer @ 15 m²/L
1st coat:	DULUX Metalshield FD Enamel @ 8.5 m²/L
2nd coat:	DULUX Metalshield FD Enamel @ 8.5 m²/L

4.102

EXTERIOR GALVANIZED EXISTING - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based acrylic polyurethane
System:	DuSpec+ NZDU03547
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Durebild STE @ 125 microns DFT
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Weathermax HBR @ 100 microns DFT

For full protective coating systems view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

4.103

EXTERIOR GALVANIZED EXISTING - PROTECTIVE COATING - METALLIC FINISH

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based metallic polyurethane + two pack solvent-based acrylic clear polyurethane
System:	DuSpec+ NZDU00663
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Durebild STE @ 125 microns DFT
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Quantum FX @ 55 microns DFT
3rd coat:	DULUX Quantum Clearcoat @ 45 microns DFT

For full protective coating systems view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

4.104

EXTERIOR NON-FERROUS METAL EXISTING - WALLS - DECORATIVE PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based
System:	DuSpec+ NZDU02089
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Weathershield @ 16 m²/L
2nd coat:	DULUX Weathershield @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Matt	DuSpec+ NZDU00694
Low Sheen	DuSpec+ NZDU03773
Weathershield Plus Super Hide Low Sheen	DuSpec+ NZDU02627
Gloss	DuSpec+ NZDU01896

Suitable for previously powdercoated surfaces. See DuSpec+ for substrate preparation information

Best Environmental System

4.105

EXTERIOR NON-FERROUS METAL EXISTING - DOORS, TRIMS AND FRAMES - DECORATIVE PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based enamel
System:	DuSpec+ NZDU01140
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Aquanamel @ 16 m²/L
2nd coat:	DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZDU02444

Best Environmental System

4.106

EXTERIOR NON-FERROUS EXISTING - LIGHT INDUSTRIAL COATING

Gloss level:	Gloss
Coating type:	Solvent-based etch primer + solvent-based enamel
System:	DuSpec+ NZDU02249
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Metalshield RFU Etch Primer @ 8 m²/L
1st coat:	DULUX Metalshield FD Enamel @ 8.5 m²/L
2nd coat:	DULUX Metalshield FD Enamel @ 8.5 m²/L

4.107

EXTERIOR NON-FERROUS METAL EXISTING - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based acrylic polyurethane
System:	DuSpec+ NZDU03549
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Durebild STE @ 125 microns DFT
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Weathermax HBR @ 100 microns DFT

Suitable for previously powdercoated surfaces. See DuSpec+ for substrate preparation information.

For full protective coating systems view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

4.108

EXTERIOR NON-FERROUS METAL EXISTING - PROTECTIVE COATING - METALLIC FINISH

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based metallic polyurethane + two pack solvent-based acrylic clear polyurethane
System:	DuSpec+ NZDU00641
Preparation:	DULUX Prep Wash @ 6 m²/L
Spot prime:	DULUX Durebild STE @ 125 microns DFT
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Quantum FX @ 55 microns DFT
3rd coat:	DULUX Quantum Clearcoat @ 45 microns DFT

For full protective coating systems view 6744DP DULUX PROTECTIVE COATINGS for protective coatings.