If you have pre-customised this work section using the "questions and answers" provided as part of the downloading process, it may be necessary to amend some clauses to suit the final project-specific version.
The section must still be checked and customised to suit the project being specified, by removing any other irrelevant details and adding project-specific details and selections.
This section relates to the manufacture, supply and installation of Metalbilt Doors commercial and industrial door and grille systems.
It includes;
Modify or extend the above description to suit the project being specified.
Refer to ~ for ~
Refer to the appropriate electrical section for power supply to motorise doors and grilles.
Include cross references to other sections where these contain related work. These may include, a glazing section for glazing not forming part of the proprietary door, a painting section for painting not forming part of the proprietary door or an electrical section for power supply to opening system.
Generally, hardware is supplied and installed as part of the door package. However, it will be necessary to confirm preferred selection from the range of options offered by the manufacturer.
Refer to the general section 1233 REFERENCED DOCUMENTS. The following documents are specifically referred to in this section:
NZBC C/AS1-AS7 | Protection from fire |
Fire tests on building materials and structures. Methods for determination of the fire resistance of non-bearing elements of construction | |
Structural design actions - Wind loads | |
AS 1530.4 | Methods of fire tests on building materials, components and structures - Fire-resistance tests of elements of building construction |
Timber-framed buildings | |
Glazing in buildings - Human impact safety requirements | |
Fire-resistant doorsets | |
BS 7346.4 | Components for smoke and heat control systems. Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires. |
Note; for health and safety reasons this section uses the most up to date version of NZS 4223.3: 2016. This new version complies with the NZBC by matching or exceeding Acceptable Solution requirements, although it is an Alternative Solution because the NZBC Acceptable Solutions cites the old version NZS 4223.3: 1999.
Delete from the DOCUMENTS clause any document not cited. List any additional cited documents.
The following are related documents and if referred to in the work section need to be added to the list of DOCUMENTS.
BRANZ BU 369 | Fitting tolerances |
Manufacturer's and supplier's documents relating to work in this section are:
Metalbilt Technical Data Sheets, Fixing Layouts and Clearances, Wall Structure Details
List documents relating to this part of the work, i.e. technical product/system specification, appraisals, etc. Normally they will be referred to in the text by the abbreviated title.
Manufacturer/supplier contact details
Company: | Metalbilt Doors |
Web: | |
Email: | mbilt.auck@metalbilt.co.nz |
| mbilt.well@metalbilt.co.nz |
| mbilt.chch@metalbilt.co.nz |
Telephone: | Auckland 09 828 1167 |
| Wellington 04 568 2933 |
| Christchurch 03 338 2600 |
It is important to ensure that all personnel on site have access to accurate, up-to-date technical information on the many products, materials and equipment used on a project. In most cases individual products are not used in isolation, but form part of a building process. Also a particular manufacturer's and/or supplier's requirements for handling, storage, preparation, installation, finishing and protection of their product can vary from what might be considered the norm. Access to technical information can help overcome this potential problem.
Provide a material manufacturer/supplier warranty:
1 year: For Materials
Refer to the general section 1237 WARRANTIES for additional requirements.
Modify or expand the clause to suit project or manufacturer/supplier requirements, options include:
Provide an installer warranty:
1 year: For Installation
Refer to the general section 1237 WARRANTIES for additional requirements.
Modify or expand the clause to suit project or installer requirements, options include:
Installers to be experienced, competent door technician familiar with the installation of the doors or grilles and approved by the manufacturer.
This clause includes generic text which should be expanded only if there are specific qualification requirements.
Substitutions are not permitted to any of the specified systems, components and associated products listed in this section.
Refer to the general section 1235 SHOP DRAWINGS for the requirements for submission and review and the provision of shop drawings.
Provide shop drawings to show the general arrangement including, but not be limited to:
If requested provide the following additional information:
~
Submit shop drawings for review to ~.
The general section 1235 SHOP DRAWINGS (1234 DOCUMENTATION if not available) describes the process of submission and review of shop drawings. Use this clause to describe the specific requirements of what the required shop drawings are to include.
Provide the following general operation and maintenance information as electronic PDF format documents:
Use this clause to list requirements of information that is required but which does not warrant a separate specialist operation and maintenance manual. Amend the clause if hard copy documents are required.
Provide this information prior to practical completion.
Provide the following compliance documentation: -
List the Producer Statements - Construction Review (PS3) required from installers that are required as a condition of carrying out this work.
Accept responsibility for the structural and limited weathertight performance of the completed door installation.
There are no standards relating to weathertightness for industrial and commercial doors. Do not expect them to be fully weathertight or watertight.
The next two mutually exclusive clauses, are setting a standard of performance for design by the contractor to meet. Specifiers should therefore consider adding some means of confirming (say by testing or certification) that the performance criteria will be or have been met. Delete the clause which does not apply.
Ensure correct information is supplied in 1220 PROJECT.
Design the installation to the wind zone parameters of NZS 3604, table 5.4.
Specify relevant wind speed or pressure. Not applicable to grilles.
Delete the clause if using DESIGN PARAMETERS - SPECIFIC DESIGN.
Design the installation to the wind pressure parameters of AS/NZS 1170.2 and to the manufacturer's installation instructions.
Specify relevant wind speed or pressure. Not applicable to grilles.
Obtain information from the project structural engineer.
Delete the clause if using DESIGN PARAMETERS - NON SPECIFIC DESIGN.
Check with the door manufacturer that the proposed construction of the wall matches the requirements of the selected door assembly before proceeding with construction of the door and wall.
Where the proposed door or installation does not comply with the standard or where other conditions apply, obtain an assessment from a registered testing laboratory or a Registered Fire Engineer to satisfy the requirements of NZBC C/AS1-AS7.
Note: Conditions which may apply prior to manufacture include allowance for sufficient time, addition of a PC Sum, etc, - matters which should be addressed in the contract documents.
In situ touch-up of coating is only permitted after receiving written direction from the Contract Administrator. Replace damaged material not able to be restored to as new condition.
Delete door types not required.
Metalbilt Steel Roller Shutter, constructed from individually roll formed replaceable interlocking slats. Operation by motorisation, manual hand chain or spring balance, custom made to fit size of opening and structure of building. Galvanized or powdercoat finishes available. Vented slots available. Refer to SELECTIONS for maximum sizes, motor types, guide type (wind loading) and finishing details. See also FIRE RATED ROLLER SHUTTER DOORS.
Suitable for factories, warehouses, industrial buildings, carparks, shop fronts, etc.requiring secure and reliable closing capabilities. Replaceable slats are more economic following, for example, vehicle impact.
Metalbilt Aluminium Standard (70mm pitch) or Series 3 (90mm pitch) Roller Shutter, constructed from individual extruded aluminium slats, plain (un-punched), vented (punched) or vision (punched and incorporating UV resistant acrylic panels at 300mm centres). Operation by spring balance or motorised with optional removable mullions, custom made to fit size of opening and structure of building. Available in silver anodised or a range of powdercoat finishes. Refer to SELECTIONS for maximum sizes, motor types and finishing details.
Suitable for bar tops, counter tops, shop fronts, pedestrian openings, arcades or where a high level of visibility and finish is required. Series 3 suitable for wider openings.
Metalbilt 12mm Aluminium Rolling Grille, constructed from individual 12mm diameter aluminium tubes connected with black nylon links. Operation by spring balance or motorised with optional removable mullions, custom made to fit size of opening and structure of building. Available in silver anodised or range of powder coat finishes. Refer to SELECTIONS for maximum sizes, motor types and finishing details.
Suitable for bar tops, counter tops, shop fronts, pedestrian openings, malls,arcades or where a high level of visibility and finish or ventilation is required.
Metalbilt 19mm Tube Aluminium Rolling Grille, constructed from individual 19mm diameter aluminium tubes connected with extruded aluminium links, guides fitted with polypropylene inserts to prevent metal to metal contact. Operation by motorised gearbox drive or manual hand chain or spring balance, custom made to fit size of opening and structure of building. Available in silver anodised or a range of powder coat finishes. Refer to SELECTIONS for maximum sizes, motor types and finishing details.
Suitable for car parks, shop fronts and large pedestrian openings providing ventilation, or a robust barrier and high standard of finish.
Metalbilt Clearspan Roller Shutter, constructed from aluminium joining rails and extruded polycarbonate slats providing high visibility, dust and vermin proof protection. Operation by spring balance or motorised with optional removable mullions, custom made to fit size of opening and structure of building. Available in silver anodised or a range of powdercoat finishes. Refer to SELECTIONS for maximum sizes, motor types and finishing details.
Suitable for shop fronts, bar tops, counter tops, pedestrian openings,malls, or where a high level of visibility and finish is required.
Henderson Panoramic Sectional Overhead Door, glazed to NZS 4223.3 or infilled, extruded aluminium sections operated by spring balance, handchain or motorised. Supplied to fit the size of opening. Available in silver anodised or powdercoat finish. Refer to SELECTIONS for maximum sizes, operation types, headroom configuration, panel layout and finishing details.
Suitable for fire stations, ambulance bays, bus depots, service stations, schools and residential.
Metalbilt Insulated Sectional Overhead Door, fabricated from imported stipple foam filled panels with industrial grade hardware. Supplied to fit the size of opening. Available in a limited range of Colorsteel colours or wet sprayed to exterior surfaces. Internal faces are white. Double glazed polycarbonate panels available. Operated by spring balance, handchain or motorised. Refer to SELECTIONS for maximum sizes, colour range, operation types, headroom configurations and panel layout.
Suitable for cold climates, coolstores, industrial applications and acoustic insulation.
Metalbilt Customised Sectional Overhead Door, frames fabricated from Duragal EWS with cold galvanized welds. Range of claddings available include mesh, timber, 19mm grille sections and louvres. Custom made to fit size of the opening. Operated by spring balance, handchain, or motorised, depending on construction. Supplied with Henderson industrial grade hardware. Refer to SELECTIONS for cladding specification options, maximum sizes, operation types, headroom configurations and panel layout.
Decorative panels often fitted by specialist contractor.
Suitable for architectural applications, those requiring to match claddings, and where additional robustness, ventilation is required, and wider openings.
Renlita Series 3000 Bifolding Door, comprised of folding double leaf doors with frame fabricated from zinc coated mild steel box sections forming a truss construction. Counter weight balanced at each jamb. Operated manually, hand chain or motorised gear box drive, custom made to fit size of opening (may exceed 25metres). Door cladding options include combination of glazing systems, timber, Colorsteel, profiled aluminium or mesh panels. Refer to SELECTIONS for operation type, clearances and finishing details.
Suitable for workshops, schools, residential, factories, aircraft hangers,distribution warehouses, industrial buildings and large commercial openings.
Renlita Series 1000 Single Leaf Door, frame fabricated from zinc coated mild steel box sections forming a truss construction. Counter weight balanced at each jamb. Operated manually, hand chain or motorised gear box drive, custom made to fit size of opening. Door cladding options include combination of glazing systems, timber, Colorsteel, profiled aluminium or mesh panels. Refer to SELECTIONS for operation type, clearances and finishing details.
Note: door designed to tilt and so provides weather protection at the head of the door opening.
Suitable for workshops, schools, residential, factories.
Metalbilt Fyreshield Fire Shutter, tested to AS 1530.4, constructed from individually roll formed slats. FRR up to -/240/- when installed in masonry walls or -/60/- when installed in specially modified timber stud fire walls. Refer to Metalbilt for details of wall construction requirements. Refer to SELECTIONS for maximum sizes, motor and activation types and finishing details.
Suitable for service openings in fire walls e.g fire separations in sports stadia food concessions, airports and industrial buildings.
Metalbilt Fyresafe Sliding Fire Door, tested to AS 1530.4, constructed with galvanized steel facing, available as single leaf or Bi-parting pairs, FRR up to -/240/30, for installation in masonry or specially modified 60 minute rated timber stud walls, activated by fusible link or signal from alarm, counterweight or motorised operation. Maximum opening size 5.4m high x 7.8m wide (subject to weight limitations). Refer to SELECTIONS for type and finishing details.
Suitable for plant and machinery rooms, hospitals, schools, hotels, council buildings, substations, record and document stores, dangerous goods stores, switch rooms, openings where hinged doors are impractical.
Metalbilt SD60 Automatic Smoke Curtain, complying with BS 7346 comprised of a roller blind with galvanized steel head box and optional bottom bars incorporating heat resistant fabric of Panama weave X32k glass cloth micronized aluminium polymer fabric, electronically operated with auto reset and battery backup for power outages. Withstands hot air and smoke at temperatures up to 1000°C for 60 minutes. Not suitable for windage. No guides provided unless specified. Bottom bar supplied with white polycarbonate cover. Refer to SELECTIONS for type and finishing details.
Note: Smoke curtains are not rated -/-/Sm.
Suitable for commercial buildings such as shopping centres and buildings with central atria.
Metalbilt Single or Double Roller Automatic Fire Curtain, complying with NZS/BS 476.22. FRR up to -/240/-. Comprised of a roller blind with a galvanized steel head box incorporating a heat resistant wire reinforced polymer coated glass cloth fabric, electronically operated with auto reset and battery backup for power outages. Withstands temperatures up to 1000°C for 270 minutes. Not suitable for windage. Bottom bar comprises etch primed back to back steel angles. Refer to SELECTIONS for type and finishing details.
Suitable for commercial buildings such as shopping centres, schools and offices.
Metalbilt Modular Sliding Door, manufactured in transportable modules from galvanized roll formed profiles with diagonal bracing for assembly and cladding on site. Supported by top track or floor track. Refer to SELECTIONS for track support options, cladding and operation types.
Suitable for large openings in industrial buildings.
Metalbilt Steel Flush Panel Doors and Frames, doors and pressed frames fabricated from zinc coated sheet steel, pre primed in the factory. Supplied in various standard sizes, with glass or louvres as required, complete with all hardware preparations. Refer to SELECTIONS for type and finishing details.
Suitable for factories, warehouses, industrial buildings, public toilets, schools, hotels and heavy duty applications.
Take delivery of materials and goods and store on site and protect from damage.
Move/handle goods in accordance with manufacturer's requirements.
Reject and replace goods that are damaged or will not provide the required finish.
The general section 1270 CONSTRUCTION describes how deliveries are to be managed and the goods stored.
Check that the trimmed and lined openings are formed and constructed to suit the required units. Do not proceed until openings are properly formed to the required standard.
Main contractor to advise door installer when wall is available for pre-lining inspection to be carried out prior to door manufacture.
Install door, track and operating equipment complete with all specified and necessary accessories and hardware to the manufacturer's requirements. Where mullions present sill preparations for lock pin holes to be by others.
Door installer to carry out a manual verification of the operation of the door.
Electrician to provide isolator, connect power supply, set limits and commission the door operation.
Install Metalbilt Steel Roller Shutter in accordance with manufacturer's installation instructions.
Install Metalbilt Aluminium Roller Shutter in accordance with manufacturer's installation instructions.
Install Metalbilt 12mm Aluminium Rolling Grille in accordance with manufacturer's installation instructions.
Install Metalbilt 19mm Tube Aluminium Rolling Grille in accordance with manufacturer's installation instructions.
Install Metalbilt Clearspan Shutter in accordance with manufacturer's installation instructions.
Install Henderson Panoramic Sectional Overhead Door in accordance with manufacturer's installation instructions.
Install Metalbilt Insulated Sectional Overhead Door in accordance with manufacturer's installation instructions.
Install Metabilt Customised Sectional Overhead Door in accordance with manufacturer's installation instructions.
Install Metalbilt Renlita Series 3000 Bifolding Door in accordance with manufacturer's installation instructions.
Install Metalbilt Renlita Series 1000 Single Leaf Door in accordance with manufacturer's installation instructions.
Install Metalbilt Fyresheild Fire Rated Roller Shutter Door in accordance with manufacturer's installation instructions.
Install Metalbilt Fyresafe Sliding Fire Door in accordance with manufacturer's installation instructions.
Install Metalbilt SD60 Automatic Smoke Curtain in accordance with manufacturer's installation instructions.
Install Metalbilt Automatic Fire Curtain in accordance with manufacturer's installation instructions.
Install Metabilt Modular Sliding Door in accordance with manufacturer's installation instructions. Concealed floor track (if applicable) to be installed by others.
Install Metalbilt Steel Flush Panel Doors and Frames in accordance with manufacturer's installation instructions.
Repair damaged or marked elements. Replace damaged or marked elements where repair is not possible or will not be acceptable. Adjust operation of equipment and moving parts not working correctly. Leave work to the standard required for following procedures.
Use this standard generic clause and add additional specific requirements.
Main Contractor to provide the following temporary protection of the finished work:
~
Amend this clause if protection is required from, weather, water, dust, damage, etc. Refer to the general section 1270 CONSTRUCTION for removal as part of final clean.
If special protection is required or protection is to be supplied by others, make reference in this clause to the general section 1250 TEMPORARY WORKS & SERVICES clause SPECIAL PROTECTION.
For further details on selections go to www.metalbilt.co.nz
Substitutions are not permitted to the following selections.
SELECTIONS is for providing details of the actual selections to be included in the contract works including motor options, colours and other information necessary to ensure that the correct materials are supplied and installed. Refer to details of requirements for wall structures, clearances and fixing points.
Location: | ~ |
Brand: | Metalbilt Steel Roller Shutter |
Operation type: | ~ |
Controller: | ~ |
Guide type: | ~ |
Mullions: | ~ |
Personnel door: | ~ |
Slats: | ~ |
Finish: | ~ |
Motor cover: | ~ |
Options:
Operation type: | 3ph Motorised, 1ph Motorised, Manual hand chain or Spring balance |
Controller: | Push button, Remote control or Multi-function controller |
Guide type: | Standard, Windlock. Add Noise Suppressant Strip if required. NSS is a replaceable PVC guide capping to reduce metal to metal contact noise. |
Mullions: | Sliding or hinged |
Personnel door: | Personnel door (wicket gate) used for egress and access through roller shutter. Complies with NZS 4121.2001 |
Slats: | 0.8mm thick galvanized nominal 100mm pitch, plain or vented |
Finish: | Galvanized or powder coated screen |
Motor cover: | AS 4020 requires machine guarding below 2.5m. Specify if this is to be provided by Metalbilt or by other means, e.g. concealment |
Refer to Metalbilt Roller Shutter Windloading Chart for selection criteria. Windlock guides offered as standard for doors over 5m width.
Noise Suppressant Strip (NSS) is a replaceable PVC guide capping to reduce metal to metal contact noise.
Location: | ~ |
Brand: | Metalbilt Aluminium Roller Shutter |
Type: | ~ |
Operation type: | ~ |
Slats: | ~ |
Finish: | ~ |
Options:
Type: | Standard (70mm pitch), Series 3 (90mm pitch) |
Operation type: | 1ph Motorised or Spring balance |
Slats: | Vented, vision (incorporating UV resistant acrylic panels) |
Finish: | Silver anodised, powdercoated screen and guides |
Location: | ~ |
Brand: | Metalbilt 12mm Tube Aluminium Rolling Grille |
Operation type: | ~ |
Finish/colour: | ~ |
Options:
Operation type: | 1ph Motorised or Spring balance |
Finish: | Silver anodised, powder coated screen and guides |
Location: | ~ |
Brand: | Metalbilt 19mm Tube Aluminium Rolling Grille |
Operation type: | ~ |
Controller: | ~ |
Usage: | ~ |
Finish/colour: | ~ |
Motor cover: | ~ |
Options:
Operation type: | 3ph Motorised, 1ph Motorised, Manual hand chain or Spring balance |
Controller: | Push button, Remote control or Multi-function controller |
Usage: | Retail or Carpark |
Finish: | Silver anodised, powder coated screen and guides |
Motor cover: | AS 4020 requires machine guarding below 2.5m. Specify if this is to be provided by Metalbilt or by other means, e.g. concealment |
Location: | ~ |
Brand: | Metalbilt Clearspan Shutter |
Operation type: | ~ |
Slats: | Vent holes in polycarbonate |
Finish: | ~ |
Options:
Operation type: | 1ph Motorised or Spring balance |
Finish: | Silver anodised, powder coated screen and guides |
Location: | ~ |
Brand: | Metalbilt Panoramic Sectional Overhead Door |
Type: | Panoramic Glazed |
Configuration: | ~ |
Operation type: | ~ |
Door cladding: | ~ |
Options:
Configuration: | Standard, Low head room, Follow the roof, Full vertical, Lift clear |
Operation type: | 3ph Motorised, 1ph Motorised, Manual push-up or Chain hoist |
Door cladding: | Panoramic: aluminium door sections (anodised or powder coated) 4mm or 6.38mm toughened glass infill and bottom leaf aluminium infill panel, or as specified, to comply with NZS 4223.3 |
Location: | ~ |
Brand: | Metalbilt Insulated Sectional Overhead Door |
Type: | Insulated Panel |
Configuration: | ~ |
Operation type: | ~ |
Door cladding: | ~ |
Options:
Configuration: | Standard, Low head room, Follow the roof, Full vertical, Lift clear |
Operation type: | 3ph Motorised, 1ph Motorised, Manual push-up or Chain hoist |
Door cladding: | Insulated: panel sections (selected RAL powder coat), wet spray exterior, polycarbonate vision panels |
Location: | ~ |
Brand: | Metalbilt Customised Sectional Overhead Door |
Type: | Customised |
Configuration: | ~ |
Operation type: | ~ |
Door cladding: | ~ |
Options:
Configuration: | Standard, Low head room, Follow the roof, Full vertical, Lift clear |
Operation type: | 3ph Motorised, 1ph Motorised, Manual push-up or Chain hoist |
Door cladding: | Custom: aluminium security mesh doors (silver anodised or powder coated), security grille (silver anodised or powder coated) |
| Panel cladding: plywood, aluminium panel, punched panels, roofing products, or as agreed. |
Location: | ~ |
Brand: | Metalbilt Renlta Series 3000 Bifolding Door |
Type: | Series 3000 double leaf |
Operation type: | ~ |
Cladding: | ~ |
Options:
Operation type: | 3ph Motorised, 1ph Motorised or Manual push-up |
Cladding: | Combination of glazing systems, timber, Colorsteel, profiled aluminium, mesh infill panels. For other options refer to Metalbilt® for details. |
Location: | ~ |
Brand: | Metalbilt Renlita Series 1000 Single Leaf Door |
Type: | Series 1000 single door |
Operation type: | ~ |
Cladding: | ~ |
Options:
Operation type: | 3ph Motorised, 1ph Motorised or Manual push-up |
Cladding: | Combination of glazing systems, timber, Colorsteel, profiled aluminium, mesh infill panels. For other options refer to Metalbilt for details. |
Location: | ~ |
Brand: | Metalbilt Fyreshield Fire Shutter with Fire Control Panel |
Fire rating: | ~ |
Operation: | ~ |
Activation: | ~ |
Options:
Fire rating: | Up to -/240/- in masonry wall, -/60/- in special timber stud fire wall |
Operation: | 3ph Motorised, 1ph Motorised or Hand chain (normally open) |
Activation: | Alarm and fusible link (hand chain type) PP100 |
| Alarm and fusible link (motorised type) PP400 |
| Fusible link (hand chain or motorised) PP300 |
Location: | ~ |
Brand: | Metalbilt Fyresafe Sliding Fire Door |
Fire rating: | ~ |
Operation type: | ~ |
Normal position: | ~ |
Fire Activation: | ~ |
Cladding: | Steel |
Finish/colour: | Galvanized |
Options:
Fire rating: | Up to -/240/30 |
Operation type: | Manual with counterweight, motorised (no fusible link) |
Normal position: | Door self closing at all times, Door held open, Door freely opens and closes |
Fire Activation: | Fusible link, or Alarm activated |
Location: | ~ |
Brand: | Metalbilt SD60 Automatic Smoke Curtain |
Operation type: | Automatic electronically operated with battery backup |
Head box type: | ~ |
Head box finish: | ~ |
Bottom bar type: | White polycarbonate cover |
Side guides: | ~ |
Options:
Head box type | Type A, Type B or Type C, refer to Metalbilt brochure for details |
Head box finish: | Galvanized or powder coated |
Side guides: | Standard smoke curtain not supplied with side guides (delete if not required), if required, available in galvanized or powder coated finish. |
Location: | ~ |
Brand: | Metalbilt Automatic Fire Curtain |
Type: | ~ |
Fire rating: | ~ |
Operation type: | Automatic electronically operated, with battery backup |
Head box type: | ~ |
Head box finish: | ~ |
Bottom bar type: | Etch primed back to back steel angles |
Side guides: | ~ |
Options:
Type: | Single or double roller |
Fire rating: | Up to -/240/- |
Head box type: | Type A, Type B or Type C, refer to Metalbilt brochure for details |
Head box finish: | Galvanized or powder coated |
Side guides: | Galvanized or powder coated |
Location: | ~ |
Brand: | Metalbilt Modular Sliding Door |
Track: | ~ |
Operation type: | ~ |
Cladding: | ~ |
Options:
Track: | Top hung with floor guide, Floor rollers & track with top guide |
Operation type: | Manual, Rack and pinion motorised (single phase) |
Cladding | Proprietary aluminium or steel cladding profiles as selected |
Location: | ~ |
Brand: | Metalbilt Steel Flush Panel Doors and Frames |
Type: | ~ |
Wall type: | ~ |
Size: | Refer drawings |
Frame profile: | ~ |
Meeting stiles (pairs):~
Edge: | ~ |
Glazing beads: | ~ |
Glazing: | ~ |
Fixings: | ~ |
Finish: | ~ |
Options:
Type: | Single or double leaf hinged |
Wall type: | Timber, steel or concrete masonry |
Frame profile: | Standard profile or as detailed |
Meeting stiles (pairs): Square edge or overlap meeting stile angle
Glazing beads: | Interior fitted or exterior fitted |
Glazing: | Georgian Wired glass in adhesive rubber seal, as selected to comply with NZS 4223.3. |
Fixings: | Stainless steel or galvanized |
Finish: | Prime painted (standard) or finish painted |