6721DE
DULUX ENVIRONMENTAL PAINTING INTERIOR
1
GENERAL

If you have pre-customised this work section using the "questions and answers" provided as part of the downloading process, it may be necessary to amend some clauses to suit the final project-specific version.

 

The section must still be checked and customised to suit the project being specified, by removing any other irrelevant details and adding project-specific details and selections.

 

This section relates to the surface preparation and painting of new and existing interior substrates using Dulux Environmental interior paint systems.

Modify or extend the above description to suit the project being specified.

 

This 6721DE DULUX ENVIRONMENTAL PAINTING INTERIOR section is intended to be combined as appropriate with 6700D DULUX PAINTING GENERAL and any selection of the other 4 work sections listed below, and they collectively comprise painting work:

For specific technical information call Dulux customer services on 0800 800 424 or access DuSpec, our web based specification site www.duspec.co.nz.

1.1
RELATED WORK

Refer to 6700D DULUX PAINTING GENERAL for general matters related to painting work.

Include cross references to other sections where these contain related work.  Other related sections could be: 6721D DULUX PAINTING INTERIOR for interior paint systems, 6742DF DULUX - FIRESHIELD INTUMESCENT COATINGS for intumescent coatings, and 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

2
PRODUCTS
2.1
PRODUCTS

Refer to 6700D DULUX PAINTING GENERAL for product clauses.

Modify or extend, including adding clauses to this section where product information relates exclusively to interior painting.

3
EXECUTION
3.1
EXECUTION

Refer to 6700 PAINTING GENERAL for execution clauses.

Modify or extend, including adding clauses to this section where product information relates exclusively to interior painting.

4
SELECTIONS

For further details on selections go to www.dulux.co.nz/specifier.

Substitutions are not permitted to the following, unless stated otherwise.

SELECTIONS is for providing details of the actual selections to be included in the contract works including model numbers, colours and other information necessary to ensure that the correct materials are supplied and installed

 

Customise the attached schedules or substitute a schedule prepared using the DuSpec system.

The following selections include Dulux products that have the environment in mind and use Dulux's best water based systems available.

Refer to DULUX DuSpec for up to date VOC levels as these are subject to change.

4.1
BACK PAINTING SCHEDULE

 Paint 2 coats (including any pre-prime) usually to match exposed face coating.  If there is no coating use water resistant clear finish sealer.

Lining type

Extent of back painting

~

~

Amend to suit project requirements

Extent options:

To lining manufacturer's requirements

 

Bottom edge & 150mm up

 

Paint whole back, bottom & concealed edges of lining

 

Paint lining under trim before fixing

 

Paint whole back, bottom & concealed edges of trim

Note;

In most cases only a requirement of wet/damp area linings.

Some pre-finished lining may still need backpainting in wet areas.

Paint, stain and clear finishes can have different sorts of requirements.

Some tiled substrates are recommended to have the whole back painted/sealed.

Paperfaced plasterboard substrates - new ceilings
4.2
INTERIOR PAPERFACED PLASTERBOARD NEW - CEILINGS - ULTRA LOW VOC PAINT

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD09007

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

2nd coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

3rd coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

4.3
INTERIOR PAPERFACED PLASTERBOARD NEW - CEILINGS - WET AREAS - PAINT

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD12409

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

3rd coat:

DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec NZ_SD09011

Wash & Wear Plus Kitchen & Bathroom

Semi Gloss

DuSpec NZ_SD09014

A Level 5 finish is recommended with Semi Gloss paint system

4.4
INTERIOR PAPERFACED PLASTERBOARD NEW - CEILINGS - ULTRA LOW VOC SUPERIOR FINISH

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD09009

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L

2nd coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

3rd coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

4.5
INTERIOR PAPERFACED PLASTERBOARD NEW - CEILINGS - WET AREAS - SUPERIOR FINISH

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD12410

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L

2nd coat:

DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

3rd coat:

DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec NZ_SD09013

Wash & Wear Plus Kitchen & Bathroom

Semi Gloss

DuSpec NZ_SD09017

Paperfaced plasterboard substrates - new walls
4.6
INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - ULTRA LOW VOC PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD09034

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

2nd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

3rd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

4.7
INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - WET AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD09011

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

3rd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Semi Gloss

DuSpec NZ_SD09014

A Level 5 finish is recommended with Semi Gloss paint system

4.8
INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - CLINICAL AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD10293

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

3rd coat:

DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

SteriGuard is recommended for broadwall areas that undergo frequent cleaning; wards, waiting rooms, common dining rooms and public areas.

4.9
INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - ULTRA LOW VOC SUPERIOR FINISH

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD09035

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L

2nd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

3rd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

4.10
INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS- WET AREAS - SUPERIOR FINISH

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD09013

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L

2nd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

3rd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Semi Gloss

DuSpec NZ_SD09017

Fibre cement sheet substrates - new ceilings
4.11
INTERIOR FIBRE CEMENT SHEET NEW - CEILINGS - ULTRA LOW VOC PAINT

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD08971

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

2nd coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

3rd coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

4.12
INTERIOR FIBRE CEMENT SHEET NEW - CEILINGS - WET AREAS - PAINT

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD12411

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

3rd coat:

DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec NZ_SD08966

Wash & Wear Plus Kitchen & Bathroom

Semi Gloss

DuSpec NZ_SD08969

Fibre cement sheet substrates - new walls
4.13
INTERIOR FIBRE CEMENT SHEET NEW - WALLS - ULTRA LOW VOC PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD08981

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

2nd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

3rd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

4.14
INTERIOR FIBRE CEMENT SHEET NEW - WALLS - WET AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD08966

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

3rd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Semi Gloss

DuSpec NZ_SD08969

4.15
INTERIOR FIBRE CEMENT SHEET NEW - WALLS - CLINICAL AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD10294

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

3rd coat:

DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

SteriGuard is recommended for broadwall areas that undergo frequent cleaning; wards, waiting rooms, common dining rooms and public areas.

4.16
INTERIOR FIBRE CEMENT SHEET NEW - WALLS - WATER BASED CLEAR

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD11919

Fire rating:

Group Number 1, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

2nd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wet Look

DuSpec NZ_SD13559

Masonry and cementitious substrates - new ceilings
4.17
INTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - CEILINGS - ULTRA LOW VOC PAINT

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD08907

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

Preparation:

DULUX AcraTex 400/4 Tiltwash @ 7 m²/L

1st coat:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

2nd coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

3rd coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

Masonry and cementitious substrates - new walls
4.18
INTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE NEW - WALLS - ULTRA LOW VOC PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD08962

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

Preparation:

DULUX AcraTex 400/4 Tiltwash @ 7 m²/L

1st coat:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

2nd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

3rd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

4.19
INTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE NEW - WALLS - WET AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD08894

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

Preparation:

DULUX AcraTex 400/4 Tiltwash @ 7 m²/L

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

3rd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Semi Gloss

DuSpec NZ_SD08895

4.20
INTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - WALLS - WATER BASED CLEAR SEALER

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD11920

Fire rating:

Group Number 1-S, Report Number 5054 NZBC C/VM2 A1.5

Preparation:

DULUX AcraTex 400/4 Tiltwash @ 7 m²/L

1st coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

2nd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wet Look

DuSpec NZ_SD13560

4.21
INTERIOR MASONRY NEW - WALLS - ULTRA LOW VOC PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD08961

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

2nd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

3rd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

4.22
INTERIOR MASONRY NEW - WALLS - WET AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD08896

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

3rd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Semi Gloss

DuSpec NZ_SD08897

4.23
INTERIOR MASONRY NEW - WALLS - CLINICAL AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD10295

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

3rd coat:

DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

SteriGuard is recommended for broadwall areas that undergo frequent cleaning; wards, waiting rooms, common dining rooms and public areas.

4.24
INTERIOR MASONRY NEW - WALLS - WATER BASED CLEAR SEALER

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD11921

Fire rating:

Group Number 1-S, Report Number 5054 NZBC C/VM2 A1.5

1st coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

2nd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wet Look

DuSpec NZ_SD13562

Masonry and cementitious substrates - new floors
4.25
INTERIOR CONCRETE FLOORS NEW - WATER BASED PAINT

Gloss level:

Satin

Coating type:

Water based

System:

DuSpec NZ_SD011923

1st coat:

BERGER JET DRY Active Clean

2nd coat:

BERGER JET DRY Active Etch

3rd coat:

BERGER JET DRY AquaTread @ 11.2 m²/L

4th coat:

BERGER JET DRY AquaTread @ 11.2 m²/L

Add Berger Jet Dry True Clear for a slip resistant coating.

4.26
INTERIOR CONCRETE FLOORS NEW - WATER BASED CLEAR

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD11924

1st coat:

BERGER JET DRY Active Clean

2nd coat:

BERGER JET DRY Active Etch

3rd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

4th coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Add Berger Jet Dry True Grip Clear for a slip resistant coating.

4.27
INTERIOR CONCRETE FLOORS NEW - WATER BASED DUST SEALER CLEAR

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD13498

1st coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Timber substrates - new ceilings, walls, trim, doors, frames - clear and stained
4.28
INTERIOR TIMBER NEW - WALLS, TRIM, DOORS, FRAMES AND CEILINGS - CLEAR

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SW08874

Fire rating:

Group Number 3, Report Number 5095, NZBC C/VM2 A1.5

1st coat:

DULUX Intergrain UltraClear @ 13 m²/L

2nd coat:

DULUX Intergrain UltraClear @ 13 m²/L

3rd coat:

DULUX Intergrain UltraClear @ 13 m²/L

Refer to table below for alternative gloss level

Gloss level

System

Gloss

DuSpec NZ_SD08873

4.29
INTERIOR TIMBER NEW - WALLS, TRIM, DOORS, FRAMES AND CEILINGS - STAINED

Gloss level:

Satin

Coating type:

Water based - stain + clear

System:

DuSpec NZ_SW08874

Fire rating:

Group Number 3, Report Number 5095, NZBC C/VM2 A1.5

1st coat:

DULUX Intergrain UltraClear (Tinted) @ 13 m²/L

2nd coat:

DULUX Intergrain UltraClear @ 13 m²/L

3rd coat:

DULUX Intergrain UltraClear @ 13 m²/L

Refer to table below for alternative gloss level

Gloss level

System

Gloss

DuSpec NZ_SD08873

Intergrain UltraClear can be tinted to a wide range of colours.  Tint only the number of coats required to achieve the desired depth of colour, with clear coats on top to complete the 3 coat system.

Timber substrates - new trim, doors, frames, etc - paint
4.30
INTERIOR TIMBER NEW TRIM, DOORS AND FRAMES - WATER BASED PAINT

Gloss level:

Semi Gloss

Coating type:

Water based enamel

System:

DuSpec NZ_SD08884

Fire rating:

Group Number 3, Report Number 5095, NZBC C/VM2 A1.5

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Aquanamel @ 16 m²/L

3rd coat:

DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD08883

Gloss

DuSpec NZ_SD08885

For cedar substrates 1 Step Oil Based Primer Sealer & Undercoat is recommended.

Timber substrates - new floors
4.31
INTERIOR TIMBER NEW - FLOORS - WATER BASED PAINT

Gloss level:

Satin

Coating type:

Water based

System:

DuSpec NZ_SD11927

1st coat:

BERGER JET DRY AquaTread @ 11.2 m²/L

2nd coat:

BERGER JET DRY AquaTread @ 11.2 m²/L

4.32
INTERIOR TIMBER NEW - FLOORS - CLEAR

Gloss level:

Satin

Coating type:

Water based - clear

System:

DuSpec NZ_SW08875

1st coat:

DULUX Intergrain UltraFloor @ 11 m²/L

2nd coat:

DULUX Intergrain UltraFloor @ 11 m²/L

3rd coat:

DULUX Intergrain UltraFloor @ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Gloss

DuSpec NZ_SW08876

4.33
INTERIOR TIMBER NEW - FLOORS - STAINED

Gloss level:

Satin

Coating type:

Water based - stain+ clear

System:

DuSpec NZ_SW08880

1st coat:

DULUX Intergrain NaturalStain @ 9 m²/L

2nd coat:

DULUX Intergrain UltraFloor@ 11 m²/L

3rd coat:

DULUX Intergrain UltraFloor @ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Gloss

DuSpec NZ_SD08881

Intergrain NaturalStain can be tinted to a wide range of colours.  Use the appropriate number of coats to achieve the desired depth of colour, with clear coats of Intergrain UltraFloor on top to complete the 3 coat system.

Metal substrates - new
4.34
INTERIOR MILD STEEL NEW - PRIMER FINISH

Gloss level:

Metallic Lustre

Coating type:

Single pack solvent  zinc phosphate primer

System:

DuSpec NZ_SC09348

1st coat:

DULUX Luxaprime ZP @ 75 microns DFT (shop applied) - NON EC PRODUCT

4.35
INTERIOR MILD STEEL NEW - DECORATIVE PAINT

Gloss level:

Gloss

Coating type:

Single pack zinc phosphate primer + water based enamel

System:

DuSpec NZ_SD09052

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX Luxaprime ZP @ 75 microns DFT (shop applied) - NON EC PRODUCT

2nd coat:

DULUX Aquanamel @ 16 m²/L

3rd coat:

DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09056

Semi Gloss

DuSpec NZ_SD09053

4.36
INTERIOR GALVANIZED NEW - WATER BASED DECORATIVE PAINT

Gloss level:

Gloss

Coating type:

Water based zinc primer + water based enamel

System:

DuSpec NZ_SD09045

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX Precision All Metal Primer @ 14.6 m²/L

2nd coat:

DULUX Aquanamel @ 16 m²/L

3rd coat:

DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09048

Semi Gloss

DuSpec NZ_SD09047

4.37
INTERIOR NON FERROUS METAL NEW - DECORATIVE PAINT

Gloss level:

Gloss

Coating type:

Water based enamel

System:

DuSpec NZ_SD09123

Fire rating:

Group Number 1-S, Report Number 5054, NZBC C/VM2 A1.5

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Aquanamel @ 16 m²/L

3rd coat:

DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09119

Semi Gloss

DuSpec NZ_SD09121

Paperfaced plasterboard substrates - existing ceilings
4.38
INTERIOR PAPERFACED PLASTERBOARD EXISTING - CEILINGS - ULTRA LOW VOC PAINT

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD09006

Spot prime:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

1st coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

2ndcoat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

4.39
INTERIOR PAPERFACED PLASTERBOARD EXISTING - CEILINGS - WET AREAS - PAINT

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD12413

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

2nd coat:

DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec NZ_SD09010

Wash & Wear Plus Kitchen & Bathroom

Semi Gloss

DuSpec NZ_SD09015

A level 5 finish is recommended with Semi Gloss paint system

4.40
INTERIOR PAPERFACED PLASTERBOARD EXISTING - CEILINGS - ULTRA LOW VOC SUPERIOR FINISH

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD09008

1st coat:

DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L

2nd coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

3rd coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

4.41
INTERIOR PAPERFACED PLASTERBOARD EXISTING - CEILINGS - WET AREAS - SUPERIOR FINISH

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD12414

1st coat:

DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L

2nd coat:

DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

3rd coat:

DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec NZ_SD09012

Wash & Wear Plus Kitchen & Bathroom

Semi Gloss

DuSpec NZ_SD09016

Paperfaced plasterboard substrates - existing walls
4.42
INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - ULTRA LOW VOC PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD09033

Spot prime:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

1st coat

DULUX Professional Enviro2 Interior @ 16 m²/L

2nd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

4.43
INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - WET AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SC09010

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

2nd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Semi Gloss

DuSpec NZ_SD09015

A Level 5 finish is recommended with Semi Gloss paint system.

4.44
INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - CLINICAL AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD10296

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

2nd coat:

DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

SteriGuard is recommended for broadwall areas that undergo frequent cleaning; wards, waiting rooms, common dining rooms and public areas.

4.45
INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - ULTRA LOW VOC SUPERIOR FINISH

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD09036

1st coat:

DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L

2nd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

3rd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

4.46
INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - WET AREAS - SUPERIOR FINISH

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD09012

1st coat:

DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L

2nd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²L

3rd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Semi Gloss

DuSpec NZ_SD09016

Fibre cement sheet substrates - existing ceilings
4.47
INTERIOR FIBRE CEMENT SHEET EXISTING - CEILINGS - ULTRA LOW VOC PAINT

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD08970

Spot prime:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

1st coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

2nd coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

4.48
INTERIOR FIBRE CEMENT SHEET EXISTING - CEILINGS - WET AREAS - PAINT

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD12415

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

2nd coat:

DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec NZ_SD08965

Wash & Wear Plus Kitchen & Bathroom

Semi Gloss

DuSpec NZ_SD08968

Fibre cement sheet substrates - existing walls
4.49
INTERIOR FIBRE CEMENT SHEET EXISTING - WALLS - ULTRA LOW VOC PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD08980

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

2nd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

4.50
INTERIOR FIBRE CEMENT SHEET EXISTING - WALLS - WET AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD08965

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

2nd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Semi Gloss

DuSpec NZ_SD08968

4.51
INTERIOR FIBRE CEMENT SHEET EXISTING - WALLS - CLINICAL AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD10297

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

2nd coat:

DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

SteriGuard is recommended for broadwall areas that undergo frequent cleaning; wards, waiting rooms, common dining rooms and public areas.

4.52
INTERIOR FIBRE CEMENT SHEET EXISTING - WALLS - WATER BASED CLEAR

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD11929

1st coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

2nd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wet Look

DuSpec NZ_SD13564

Masonry and cementitious substrates - existing ceilings
4.53
INTERIOR TILT-UP, PRECAST, OFF THE FORM CONCRETE EXISTING - CEILINGS - ULTRA LOW VOC PAINT

Gloss level:

Flat

Coating type:

Water based

System:

DuSpec NZ_SD08906

Spot prime:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

1st coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

2nd coat:

DULUX Professional Enviro2 Ceiling Flat @ 16 m²/L

Masonry and cementitious substrates - existing walls
4.54
INTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE EXISTING WALLS - ULTRA LOW VOC - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD08963

Spot prime:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

1st coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

2nd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

4.55
INTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE EXISTING - WALLS - WET AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD08892

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

2nd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss  level

System

Semi Gloss

DuSpec NZ_SD08893

4.56
INTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE EXISTING - WALLS - WATER BASED CLEAR

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD11930

1st coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

2nd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wet Look

DuSpec NZ_SD13565

4.57
INTERIOR MASONRY EXISTING - WALLS - ULTRA LOW VOC PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD08959

Spot prime:

DULUX Professional Enviro2 Acrylic Sealer Undercoat @ 14 m²/L

1st coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

2nd coat:

DULUX Professional Enviro2 Interior @ 16 m²/L

4.58
INTERIOR MASONRY EXISTING - WALLS - WET AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD08890

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

2nd coat:

DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Semi Gloss

DuSpec NZ_SD08891

4.59
INTERIOR MASONRY EXISTING - WALLS - CLINICAL AREAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD10298

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

2nd coat:

DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

SteriGuard is recommended for broadwall areas that undergo frequent cleaning; wards, waiting rooms, common dining rooms and public areas.

4.60
INTERIOR MASONRY EXISTING - WALLS - WATER BASED CLEAR

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD11931

1st coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

2nd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wet Look

DuSpec NZ_SD13566

Masonry and cementitious substrates - existing floors
4.61
INTERIOR CONCRETE FLOORS EXISTING - PAINT

Gloss level:

Satin

Coating type:

Water based

System:

DuSpec NZ_SD11932

1st coat:

BERGER JET DRY Active Clean

2nd coat:

BERGER JET DRY AquaTread @ 11.2 m²/L

3rd coat:

BERGER JET DRY AquaTread @ 11.2 m²/L

4.62
INTERIOR CONCRETE FLOORS EXISTING - WATER BASED CLEAR

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD11935

1st coat:

BERGER JET DRY Active Clean

2nd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

3rd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Wet Look

DuSpec NZ_SD13567

Timber substrates - existing ceilings, walls, trim, doors, frames - clear and stained
4.63
INTERIOR TIMBER EXISTING - WALLS, TRIM, DOORS, FRAMES AND CEILINGS - CLEAR

Gloss level:

Satin

Coating type:

Water based - clear

System:

DuSpec NZ_SW08861

Spot prime:

DULUX Intergrain UltraClear @ 13 m²/L

1st coat:

DULUX Intergrain UltraClear @ 13 m²/L

2nd coat:

DULUX Intergrain UltraClear @ 13 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Gloss

DuSpec NZ_SD08860

4.64
INTERIOR TIMBER EXISTING - WALLS, TRIM, DOORS, FRAMES AND CEILINGS - STAINED

Gloss level:

Satin

Coating type:

Water based - clear - stain + clear

System:

DuSpec NZ_SW08861

Spot prime:

DULUX Intergrain UltraClear (Tinted) @ 13 m²/L

1st coat:

DULUX Intergrain UltraClear @ 13 m²/L

2nd coat:

DULUX Intergrain UltraClear @ 13 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Gloss

DuSpec NZ_SD08860

Intergrain UltraClear can be tinted to a wide range of colours.  Tint only the number of coats required to achieve the desired depth of colour, with clear coats on top to complete the 3 coat system.

Timber substrates - existing trim, doors, frames, etc - paint
4.65
INTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - WATER BASED PAINT

Gloss level:

Semi Gloss

Coating type:

Water based enamel

System:

DuSpec NZ_SD08871

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Aquanamel @ 16 m²/L

2nd coat:

DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD08882

Gloss

DuSpec NZ_SD08872

For cedar substrates 1 Step Oil Based Primer Sealer Undercoat is recommended.

Timber substrates - existing floors
4.66
INTERIOR TIMBER EXISTING - FLOORS - PAINT

Gloss level:

Satin

Coating type:

Water based

System:

DuSpec NZ_SD11936

1st coat:

BERGER JET DRY AquaTread @ 11.2 m²/L

2nd coat:

BERGER JET DRY AquaTread @ 11.2 m²/L

4.67
INTERIOR TIMBER EXISTING - FLOORS - CLEAR

Gloss level:

Satin

Coating type:

Water based - clear

System:

DuSpec NZ_SW08863

Spot prime:

DULUX Intergrain UltraFloor @ 11 m²/L

1st coat:

DULUX Intergrain UltraFloor @ 11 m²/L

2nd coat:

DULUX Intergrain UltraFloor @ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Semi Gloss

DuSpec NZ_SW08862

4.68
INTERIOR TIMBER EXISTING - FLOORS - STAINED

Gloss level:

Satin

Coating type:

Water based - stain + clear

System:

DuSpec NZ_SW08868

1st coat

DULUX Intergrain NaturalStain@ 9 m²/L

2nd coat:

DULUX Intergrain UltraFloor @ 11 m²/L

3rd coat:

DULUX Intergrain UltraFloor@ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Gloss

DuSpec NZ_SD08867

Intergrain NaturalStain can be tinted to a wide range of colours.  Use the appropriate number of coats to achieve the desired depth of colour, with clear coats of Intergrain UltraFloor on top to complete the 3 coat system.

Metal substrates - existing
4.69
INTERIOR MILD STEEL EXISTING - PRIMER FINISH

Gloss level:

Metallic Lustre

Coating type:

Single pack solvent  zinc phosphate primer

System:

DuSpec NZ_SC09065

1st coat:

DULUX Luxaprime ZP @ 75 microns DFT - NON EC PRODUCT

4.70
INTERIOR MILD STEEL EXISTING - DECORATIVE PAINT

Gloss level:

Gloss

Coating type:

Single pack zinc phosphate primer + water based enamel top coat

System:

DuSpec NZ_SD09051

Spot prime:

DULUX Luxaprime ZP @ 75 microns DFT (shop applied) - NON EC PRODUCT

1st coat:

DULUX Aquanamel @ 16 m²/L

2nd coat:

DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09055

Semi Gloss

DuSpec NZ_SD09054

4.71
INTERIOR GALVANIZED EXISTING - DECORATIVE PAINT

Gloss level:

Gloss

Coating type:

Water based zinc primer + water based enamel

System:

DuSpec NZ_SD09044

Spot prime:

DULUX Precision All Metal Primer @ 14.6 m²/L

1st coat:

DULUX Aquanamel @ 16 m²/L

2nd coat:

DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09049

Semi Gloss

DuSpec NZ_SD09046

4.72
INTERIOR NON FERROUS METAL EXISTING - DECORATIVE PAINT

Gloss level:

Gloss

Coating type:

Water based enamel

System:

DuSpec NZ_SD09124

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Aquanamel @ 16 m²/L

2nd coat:

DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09118

Semi Gloss

DuSpec NZ_SD09120