6711DE
DULUX ENVIRONMENTAL PAINTING EXTERIOR
1
GENERAL

If you have pre-customised this work section using the "questions and answers" provided as part of the downloading process, it may be necessary to amend some clauses to suit the final project-specific version.

 

The section must still be checked and customised to suit the project being specified, by removing any other irrelevant details and adding project-specific details and selections.

 

This section relates to the surface preparation and painting of new and existing exterior substrates using Dulux environmental exterior paint systems.

Modify or extend the above description to suit the project being specified.

 

This 6711DE DULUX ENVIRONMENTAL PAINTING EXTERIOR section is intended to be combined as appropriate with 6700D DULUX PAINTING GENERAL and any selection of the other 5 work sections listed below, and they collectively comprise painting work:

 

For specific technical information call Dulux customer services on 0800 800 424 or access DuSpec, our web based specification site www.duspec.co.nz.

1.1
RELATED WORK

Refer to 6700D DULUX PAINTING GENERAL for general matters related to painting work.

Include cross references to other sections where these contain related work.  Other related sections could be; 6711D DULUX PAINTING EXTERIOR for exterior painting, 6742DZ DULUX - ZONE INTUMESCENT COATINGS for intumescent coatings and 6744DP DULUX PROTECTIVE COATINGS for protective coatings.

2
PRODUCTS
2.1
PRODUCTS

Refer to 6700D DULUX PAINTING GENERAL for product clauses.

Modify or extend, including adding clauses to this section where product information relates exclusively to exterior painting.

3
EXECUTION
3.1
EXECUTION

Refer to 6700D DULUX PAINTING GENERAL for execution clauses.

Modify or extend, including adding clauses to this section where product information relates exclusively to interior painting.

4
SELECTIONS

For further details on selections go to www.dulux.co.nz/specifier.

Substitutions are not permitted to the following, unless stated otherwise.

SELECTIONS is for providing details of the actual selections to be included in the contract works including colours and other information necessary to ensure that the correct materials are supplied and installed.

 

Customise the attached schedules or substitute a schedule prepared using the DuSpec system.

The following selections highlights Dulux products that have the environment in mind and use Dulux's best water based systems available.

Refer to the DULUX Duspec for up to date VOC levels as these are subject to change.

4.1
BACK PAINTING SCHEDULE

Paint 2 coats (including any pre-prime) to match exposed face coating.

Cladding type

Extent of back painting

~

~

Amend to suit project requirements

Extent options:

To cladding manufacturer's requirements

 

Bottom edge & 150mm up

 

Paint whole back, bottom & concealed edges of cladding

 

Paint cladding under trim before fixing

 

Paint whole back, bottom & concealed edges of trim

Note;

Some pre-finished cladding may still need back painting.

Paint, stain and clear finishes can have different sorts of requirements.

Masonry and cementitious substrates - new walls
4.2
EXTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE NEW - WALLS - PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09195

Preparation:

DULUX AcraTex 400/4 Tiltwash @ 7 m²/L

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

3rd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec  NZ_SD09196

Weathershield Plus Super Hide Low Sheen

DuSpec  NZ_SD13795

Gloss

DuSpec NZ_SD09188

Dulux Weathershield X10 is self priming, and the primer coat can be be replaced with another coat of Weathershield X10 (excludes Extra Bright Base and some coloured bases).

4.3
EXTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE NEW - WALLS - CLEAR

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD11975

Preparation:

DULUX AcraTex 400/4 Tiltwash @ 7 m²/L

1st coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

2nd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

BERGER JET DRY Stone & Paving Sealer Wet Look

DuSpec  NZ_SD13560

4.4
EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - HIGH BUILD 170 MICRON DFT

Gloss level:

Matt

Coating type:

Water based high build

System:

DuSpec NZ_SA09160

Preparation:

DULUX AcraTex 400/4 Tiltwash @ 7 m²/L

1st coat:

DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L

2nd coat:

DULUX AcraTex AcraShield Advance @ 6 m²/L

3rd coat:

DULUX AcraTex AcraShield Advance @ 6 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Gloss

DuSpec NZ_SD09161

For cementitious surfaces that have had less than 28 days curing Dulux recommend the use of AcraTex Green Render Sealer rather than AcraPrime 501/1.

4.5
EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - HIGH BUILD 270 MICRON DFT

Gloss level:

Matt

Coating type:

Water based high build

System:

DuSpec NZ_SA09137

Preparation:

DULUX AcraTex 400/4 Tiltwash @ 7 m²/L

1st coat:

DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L

2nd coat:

DULUX Elastomeric 201 @ 4 m²/L

3rd coat:

DULUX Elastomeric 201 @ 4 m²/L

For cementitious surfaces that have had less than 28 days curing Dulux recommend the use of AcraTex Green Render Sealer rather than AcraPrime 501/1.

4.6
EXTERIOR MASONRY NEW - WALLS - PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09194

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

3rd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09197

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13797

Gloss

DuSpec NZ_SD09187

Dulux Weathershield X10 is self priming, and the primer coat can be replaced with another coat of Weathershield X10 (excludes Extra Bright Base and some coloured bases).

4.7
EXTERIOR MASONRY NEW - WALLS - CLEAR

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD11976

1st coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

2nd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

BERGER JET DRY Stone & Paving Sealer Wet Look

DuSpec NZ_SD13562

4.8
EXTERIOR MASONRY NEW - WALLS - HIGH BUILD 170 MICRON DFT

Gloss level:

Matt

Coating type:

Water based high build

System:

DuSpec NZ_SA09151

1st coat:

DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L

2nd coat:

DULUX AcraTex AcraShield Advance @ 6 m²/L

3rd coat:

DULUX AcraTex AcraShield Advance @ 6 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Gloss

DuSpec NZ_SA09153

For cementitious surfaces that have had less than 28 days curing Dulux recommend the use of AcraTex Green Render Sealer rather than AcraPrime 501/1.

4.9
EXTERIOR MASONRY NEW - WALLS - HIGH BUILD 270 MICRON DFT

Gloss level:

Matt

Coating type:

Water based high build

System:

DuSpec NZ_SA09136

1st coat:

DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L

2nd coat:

DULUX Elastomeric 201 @ 4 m²/L

3rd coat:

DULUX Elastomeric 201 @ 4 m²/L

For cementitious surfaces that have had less than 28 days curing Dulux recommend the use of AcraTex Green Render Sealer rather AcraPrime 501/1.

Masonry and cementitious substrates - new areas, foot traffic
4.10
EXTERIOR CONCRETE NEW - FOOT TRAFFIC - PAINT

Gloss level:

Satin

Coating type:

Water based

System:

DuSpec NZ_SD11977

1st coat:

BERGER JET DRY Active Clean

2nd coat:

BERGER JET DRY Active Etch

3rd coat:

BERGER JET DRY AquaTread @ 11.2 m²/L

4th coat:

BERGER JET DRY AquaTread @ 11.2 m²/L

Add Berger Jet Dry True Grip Clear for a slip resistant coating.

4.11
EXTERIOR CONCRETE NEW - FOOT TRAFFIC - WATER BASED CLEAR

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD11978

1st coat:

BERGER JET DRY Active Clean

2nd coat:

BERGER JET DRY Active Etch

3rd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

4th coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Add Berger Jet Dry Grip Clear for a slip resistant coating.

Gloss level

System

BERGER JET DRY Stone & Paving Sealer Wet Look

DuSpec NZ_SD13563

Fibre cement sheet substrates - new cladding
4.12
EXTERIOR FIBRE CEMENT SHEET NEW - CLADDING - PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09169

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

3rd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09171

Gloss

DuSpec NZ_SD09167

Dulux Weathershield X10 is self priming, and the primer coat can be replaced with another coat of Weathershield X10 (excludes Extra Bright Base and some coloured bases).

Timber substrates - new cladding
4.13
EXTERIOR TIMBER NEW - CLADDING - PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09216

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

3rd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09217

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13807

Gloss

DuSpec NZ_SD09209

Dulux Weathershield X10 is self priming, and the primer coat can be replaced with another coat of Weathershield X10 (excludes Extra Bright Base and some coloured bases).

4.14
EXTERIOR TIMBER NEW - CLADDING - WATER BASED STAIN

Gloss level:

Matt

Coating type:

Water based stain

System:

DuSpec NZ_SW09224

Preparation:

INTERGRAIN Reviva @ 20-40 m²/L

1st coat:

INTERGRAIN NaturalStain @ 9 m²/L

2nd coat:

INTERGRAIN NaturalStain @ 9 m²/L

3rd coat:

INTERGRAIN NaturalStain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Timber substrates - new trim, doors, frames, etc
4.15
EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - WATER BASED ENAMEL

Gloss level:

Semi Gloss

Coating type:

Water based enamel

System:

DuSpec NZ_SD09147

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Aquanamel @ 16 m²/L

3rd coat:

DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Gloss

DuSpec NZ_SD09142

4.16
EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - WATER BASED STAIN

Gloss level:

Matt

Coating type:

Water based stain

System:

DuSpec NZ_SW09224

Preparation:

INTERGRAIN Reviva @ 20-40 m²/L

1st coat:

INTERGRAIN NaturalStain @ 9 m²/L

2nd coat:

INTERGRAIN NaturalStain @ 9 m²/L

3rd coat:

INTERGRAIN NaturalStain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Timber substrates - new fences, pergolas, etc
4.17
EXTERIOR TIMBER NEW - FENCES AND PERGOLAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD09236

Preparation:

CABOT'S Deck Clean @ 12-16 m²/L

1st coat:

DULUX Timbacryl @ 16.4 m²/L

2nd coat:

DULUX Timbacryl @ 16.4 m²/L

3rd coat:

DULUX Timbacryl @ 16.4 m²/L

4.18
EXTERIOR TIMBER NEW - FENCES AND PERGOLAS - WATER BASED STAIN

Gloss level:

Matt

Coating type:

Water based stain

System:

DuSpec NZ_SW09224

Preparation:

INTERGRAIN Reviva @ 20-40 m²/L

1st coat:

INTERGRAIN NaturalStain @ 9 m²/L

2nd coat:

INTERGRAIN NaturalStain @ 9 m²/L

3rd coat:

INTERGRAIN NaturalStain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Timber substrates - new decks
4.19
EXTERIOR TIMBER NEW - DECKS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD09236

1st coat:

DULUX Timbacryl @ 16.4 m²/L

2nd coat:

DULUX Timbacryl @ 16.4 m²/L

3rd coat:

DULUX Timbacryl @ 16.4 m²/L

4.20
EXTERIOR TIMBER NEW - DECKS - WATER BASED OIL

Gloss level:

Matt

Coating type:

Water based oil

System:

DuSpec NZ_SW09228

Preparation:

INTERGRAIN Reviva @ 20-40 m²/L

1st coat:

INTERGRAIN UltraDeck @ 12 m²/L

2nd coat:

INTERGRAIN UltraDeck @ 12 m²/L

3rd coat:

INTERGRAIN UltraDeck @ 12 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

4.21
EXTERIOR TIMBER NEW - DECKS - WATER BASED STAIN

Gloss level:

Matt

Coating type:

Water based stain

System:

DuSpec NZ_SW09224

Preparation:

INTERGRAIN Reviva @ 20-40 m²/L

1st coat:

INTERGRAIN NaturalStain @ 9 m²/L

2nd coat:

INTERGRAIN NaturalStain @ 9 m²/L

3rd coat:

INTERGRAIN NaturalStain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Plastic substrates - new
4.22
EXTERIOR PLASTIC NEW - PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09205

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

3rd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09204

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13799

Gloss

DuSpec NZ_SD09208

Dulux Weathershield X10 is self priming, and the primer coat can be replaced with another coat of Weathershield X10 (excludes Extra Bright Base and some coloured bases).

Metal substrates - new
4.23
EXTERIOR METAL ROOF NEW - PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09279

1st coat:

DULUX Roof & Trim @ 16 m²/L

2nd coat:

DULUX Roof & Trim @ 16 m²/L

3rd coat:

DULUX Roof & Trim @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Gloss

DuSpec NZ_SD09280

Excludes decramastic finishes.

4.24
EXTERIOR MILD STEEL NEW - DECORATIVE PAINT

Gloss level:

Semi Gloss

Coating type:

Water based zinc primer + water based topcoat

System:

DuSpec NZ_SD09257

1st coat:

DULUX Precision All Metal Primer @ 14.8 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

3rd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09265

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13800

Gloss

DuSpec NZ_SD09252

4.25
EXTERIOR GALVANIZED NEW - WATER BASED DECORATIVE PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09258

1st coat:

DULUX Precision All Metal Primer @ 14.8 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

3rd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09266

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13800

Gloss

DuSpec NZ_SD09251

4.26
EXTERIOR NON FERROUS METAL NEW - WALLS - DECORATIVE PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09256

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

3rd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09264

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13802

Gloss

DuSpec NZ_SD09253

4.27
EXTERIOR NON FERROUS METAL NEW - DOORS, TRIMS AND FRAMES - DECORATIVE PAINT

Gloss level:

Semi Gloss

Coating type:

Water based enamel

System:

DuSpec NZ_SD09148

1st coat:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

2nd coat:

DULUX Aquanamel @ 16 m²/L

3rd coat:

DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Gloss

DuSpec NZ_SD09141

Anti graffiti - non sacrificial
4.28
ANTI GRAFFITI OVER BARE SUBSTRATE (EXCL TILT UP) - SINGLE PACK CLEAR SATIN

Gloss level:

Satin

Coating type:

Antigraffiti coating

System:

Performance Solutions (supplied by Dulux)

Preparation:

DULUX Prep Wash @ 6 m²/L

1st coat:

MicroSeal

2nd coat:

VandlGuard

3rd coat:

VandlGuard

4th coat:

VandlGuard (optional)

Contact a DULUX representative or PERFORMANCE SOLUTIONS 0800 999 122 for further information regarding specified PERFORMANCE SOLUTIONS.

4.29
ANTI GRAFFITI OVER TILT UP, PRECAST AND OFF THE FORM CONCRETE -SINGLE PACK CLEAR SATIN

Gloss level:

Satin

Coating type:

Antigraffiti coating

System:

Performance Solutions (supplied by Dulux)

Preparation:

DULUX AcraTex 400/4 Tiltwash @ 7 m²/L

1st coat:

MicroSeal

2nd coat:

VandlGuard

3rd coat:

VandlGuard

4th coat:

VandlGuard (optional)

Contact a DULUX representative or PERFORMANCE SOLUTIONS 0800 999 122 for further information regarding specified PERFORMANCE SOLUTIONS.

4.30
ANTI GRAFFITI OVER NEWLY PAINTED - SINGLE PACK CLEAR SATIN

Gloss level:

Satin

Coating type:

Antigraffiti coating

System:

Performance Solutions (supplied by Dulux)

1st coat:

VandlGuard

2nd coat:

VandlGuard

3rd coat:

VandlGuard (optional)

The newly painted surface must be left to cure for a minimum of 10 days before application of VandlGuard.

Contact a DULUX representative or PERFORMANCE SOLUTIONS 0800 999 122 for further information regarding specified PERFORMANCE SOLUTIONS.

Masonry and cementitious substrates - existing walls
4.31
EXTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE EXISTING - WALLS - PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09193

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Weathershield X10 @ 16 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09199

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13803

Gloss

DuSpec NZ_SD09191

Dulux Weathershield X10 is self priming, and the primer coat can be replaced with another coat of Weathershield X10 (excludes Extra Bright Base and some coloured bases).

4.32
EXTERIOR TILT-UP, PRECAST & OFF FORM CONCRETE EXISTING - HIGH BUILD 170 MICRON DFT

Gloss level:

Matt

Coating type:

Water based high build

System:

DuSpec NZ_SA09159

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L

3rd coat:

DULUX AcraTex AcraShield Advance @ 6 m²/L

2nd coat:

DULUX AcraTex AcraShield Advance @ 6 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Gloss

DuSpec NZ_SD09156

4.33
EXTERIOR TILT-UP, PRECAST & OFF FORM CONCRETE EXISTING - HIGH BUILD 270 MICRON DFT

Gloss level:

Matt

Coating type:

Water based high build

System:

DuSpec NZ_SA09139

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L

1st coat:

DULUX Elastomeric 201 @ 4 m²/L

2nd coat:

DULUX Elastomeric 201 @ 4 m²/L

4.34
EXTERIOR MASONRY EXISTING - WALLS - PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09192

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Weathershield X10 @ 16 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09198

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13804

Gloss

DuSpec NZ_SD09189

Dulux Weathershield X10 is self priming, and the primer coat can be replaced with another coat of Weathershield X10 (excludes Extra Bright Base and some coloured bases).

4.35
EXTERIOR MASONRY EXISTING - WALLS - HIGH BUILD 170 MICRON DFT

Gloss level:

Matt

Coating type:

Water based high build

System:

DuSpec NZ_SA09158

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L

1st coat:

DULUX AcraTex AcraShield Advance @ 6 m²/L

2nd coat:

DULUX AcraTex AcraShield Advance @ 6 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Gloss

DuSpec NZ_SD09155

4.36
EXTERIOR MASONRY EXISTING - WALLS - HIGH BUILD 270 MICRON DFT

Gloss level:

Matt

Coating type:

Water based high build

System:

DuSpec NZ_SA09138

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L

1st coat:

DULUX Elastomeric 201 @ 4 m²/L

2nd coat:

DULUX Elastomeric 201 @ 4 m²/L

Masonry and cementitious substrates - existing areas, foot traffic
4.37
EXTERIOR CONCRETE EXISTING - FOOT TRAFFIC - PAINT

Gloss level:

Satin

Coating type:

Water based

System:

DuSpec NZ_SD11932

1st coat:

BERGER JET DRY Active Clean

2nd coat:

BERGER JET DRY AquaTread @ 11.2 m²/L

3rd coat:

BERGER JET DRY AquaTread @ 11.2 m²/L

Add Berger Jet Dry True Grip Clear for a slip resistant coating.

4.38
EXTERIOR CONCRETE EXISTING - FOOT TRAFFIC - WATER BASED CLEAR

Gloss level:

Satin

Coating type:

Water based clear

System:

DuSpec NZ_SD11935

1st coat:

BERGER JET DRY Active Clean

2nd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

3rd coat:

BERGER JET DRY Stone & Paving Sealer @ 11 m²/L

Add Berger Jet Dry True Grip Clear for a slip resistant coating.

Gloss level

System

BERGER JET DRY Stone & Paving Sealer Wet Look

DuSpec NZ_SD13567

Fibre cement sheet substrates - existing cladding
4.39
EXTERIOR FIBRE CEMENT SHEET EXISTING - CLADDING - PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09168

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Weathershield X10 @ 16 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09170

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13805

Gloss

DuSpec NZ_SD09166

Dulux Weathershield X10 is self priming, and the primer coat can be replaced with another coat of Weathershield X10 (excludes Extra Bright Base and some coloured bases).

Timber substrates - existing cladding
4.40
EXTERIOR TIMBER EXISTING - CLADDING - PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09213

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Weathershield X10 @ 16 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09220

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13806

Gloss

DuSpec NZ_SD09212

Dulux Weathershield X10 is self priming, and the primer coat can be replaced with another coat of Weathershield X10 (excludes Extra Bright Base and some coloured bases).

4.41
EXTERIOR TIMBER EXISTING - CLADDING - WATER BASED STAIN

Gloss level:

Matt

Coating type:

Water based stain

System:

DuSpec NZ_SW09223

Preparation:

INTERGRAIN Reviva @ 20-40 m²/L

1st coat:

INTERGRAIN NaturalStain @ 9 m²/L

2nd coat:

INTERGRAIN NaturalStain @ 9 m²/L

3rd coat:

INTERGRAIN NaturalStain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Timber substrates - existing trim, doors, frames, etc
4.42
EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - WATER BASED ENAMEL

Gloss level:

Semi Gloss

Coating type:

Water based enamel

System:

DuSpec NZ_SD09146

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Aquanamel @ 16 m²/L

2nd coat:

DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Gloss

DuSpec NZ_SD09143

4.43
EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - WATER BASED STAIN

Gloss level:

Matt

Coating type:

Water based stain

System:

DuSpec NZ_SW09223

Preparation:

INTERGRAIN Reviva @ 20-40 m²/L

1st coat:

INTERGRAIN NaturalStain @ 9 m²/L

2nd coat:

INTERGRAIN NaturalStain @ 9 m²/L

3rd coat:

INTERGRAIN NaturalStain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Timber substrates - existing fences, pergolas, etc
4.44
EXTERIOR TIMBER EXISTING - FENCES AND PERGOLAS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD09235

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX Timbacryl @ 16.4 m²/L

1st coat:

DULUX Timbacryl @ 16.4 m²/L

2nd coat:

DULUX Timbacryl @ 16.4 m²/L

4.45
EXTERIOR TIMBER EXISTING - FENCES AND PERGOLAS - WATER BASED STAIN

Gloss level:

Matt

Coating type:

Water based stain

System:

DuSpec NZ_SW09223

Preparation:

INTERGRAIN Reviva @ 20-40 m²/L

1st coat:

INTERGRAIN NaturalStain @ 9 m²/L

2nd coat:

INTERGRAIN NaturalStain @ 9 m²/L

3rd coat:

INTERGRAIN NaturalStain @ 9 m²/L (optional)

Use the appropriate number of coats of INTERGRAIN NaturalStain required to achieve the desired depth of colour.

Timber substrates - existing decks
4.46
EXTERIOR TIMBER EXISTING - DECKS - PAINT

Gloss level:

Low Sheen

Coating type:

Water based

System:

DuSpec NZ_SD09235

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX Timbacryl @ 16.4 m²/L

1st coat:

DULUX Timbacryl @ 16.4 m²/L

2nd coat:

DULUX Timbacryl @ 16.4 m²/L

4.47
EXTERIOR TIMBER EXISTING - DECKS - WATER BASED OIL

Gloss level:

Matt

Coating type:

Water based oil

System:

DuSpec NZ_SW09227

Preparation:

INTERGRAIN Reviva @ 20-40 m²/L

1st coat:

INTERGRAIN UltraDeck @ 12 m²/L

2nd coat:

INTERGRAIN UltraDeck @ 12 m²/L

3rd coat:

INTERGRAIN UltraDeck @ 12 m² (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

4.48
EXTERIOR TIMBER EXISTING - DECKS - WATER BASED STAIN

Gloss level:

Matt

Coating type:

Water based stain

System:

DuSpec NZ_SW09223

Preparation:

INTERGRAIN Reviva @ 20-40 m²/L

1st coat:

INTERGRAIN NaturalStain @ 9 m²/L

2nd coat:

INTERGRAIN NaturalStain @ 9 m²/L

3rd coat:

INTERGRAIN NaturalStain @ 9 m²/L (optional)

Use the appropriate number of coats required to achieve the desired depth of colour.

Plastic substrates - existing
4.49
EXTERIOR PLASTIC EXISTING - PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09206

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Weathershield X10 @ 16 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09203

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13809

Gloss

DuSpec NZ_SD09207

Dulux Weathershield X10 is self priming, and the primer coat can be replaced with another coat of Weathershield X10 (excludes Extra Bright Base and some coloured bases).

Metal substrates - existing
4.50
EXTERIOR METAL ROOF EXISTING - PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09281

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX Precision All Metal Primer @ 14.8 m²/L

1st coat:

DULUX Roof & Trim @ 16 m²/L

2nd coat:

DULUX Roof & Trim @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Gloss

DuSpec NZ_SD09282

Excludes decromastic finishes.

4.51
EXTERIOR MILD STEEL EXISTING - DECORATIVE PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09260

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX Precision All Metal Primer @ 14.8 m²/L

1st coat:

DULUX Weathershield X10 @ 16 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09262

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13810

Gloss

DuSpec NZ_SD09250

4.52
EXTERIOR GALVANIZED EXISTING - DECORATIVE PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09259

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX Precision All Metal Primer @ 14.8 m²/L

1st coat:

DULUX Weathershield X10 @ 16 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09261

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13811

Gloss

DuSpec NZ_SD09249

4.53
EXTERIOR NON FERROUS METAL EXISTING - WALLS - DECORATIVE PAINT

Gloss level:

Semi Gloss

Coating type:

Water based

System:

DuSpec NZ_SD09255

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Weathershield X10 @ 16 m²/L

2nd coat:

DULUX Weathershield X10 @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Low Sheen

DuSpec NZ_SD09263

Weathershield Plus Super Hide Low Sheen

DuSpec NZ_SD13812

Gloss

DuSpec NZ_SD09254

Suitable for previously powdercoated surfaces.  See DuSpec for substrate preparation information.

4.54
EXTERIOR NON FERROUS METAL EXISTING - DOORS, TRIMS AND FRAMES - DECORATIVE PAINT

Gloss level:

Semi Gloss

Coating type:

Water based enamel

System:

DuSpec NZ_SD09145

Preparation:

DULUX Prep Wash @ 6 m²/L

Spot prime:

DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L

1st coat:

DULUX Aquanamel @ 16 m²/L

2nd coat:

DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative top coat gloss level

Gloss level

System

Gloss

DuSpec NZ_SD09144