6721D

DULUX PAINTING INTERIOR

GENERAL

If you have pre-customised this work section using the "questions and answers" provided as part of the downloading process, it may be necessary to amend some clauses to suit the final project-specific version.

The section must still be checked and customised to suit the project being specified, by removing any other irrelevant details and adding project-specific details and selections.

This section relates to the surface preparation and painting of new and existing interior substrates using Dulux interior paint systems.

Modify or extend the above description to suit the project being specified.

This 6721D DULUX PAINTING INTERIOR section is intended to be combined as appropriate with 6700D DULUX PAINTING GENERAL and any selection of the other 4 work sections listed below, and they collectively comprise painting work:

6711D DULUX PAINTING EXTERIOR
6711DE DULUX ENVIRONMENTAL PAINTING EXTERIOR
6721DE DULUX ENVIRONMENTAL PAINTING INTERIOR
6742DI DULUX FIRETEX INTUMESCENT COATINGS - STEELWORK
6744DP DULUX PROTECTIVE COATINGS
6745DF DULUX PROTECTIVE COATINGS - STEELWORK

For specific technical information call Dulux customer services on 0800 800 424 or access DuSpec+, our web based specification site www.duspecplus.co.nz.

1.1

RELATED WORK

Refer to 6700D DULUX PAINTING GENERAL for general matters related to painting work.

Include cross references to other sections where these contain related work. Other related sections could be: 6721DE DULUX ENVIRONMENTAL PAINTING INTERIOR for environmental paint systems, 6742DI DULUX FIRETEX INTUMESCENT COATINGS - STEELWORK for intumescent coatings, and 6744DP DULUX PROTECTIVE COATINGS and/or 6745DF DULUX PROTECTIVE COATINGS - STEELWORK for protective coatings.

PRODUCTS

2.1

PRODUCTS

Refer to 6700D DULUX PAINTING GENERAL for product clauses.

Modify or extend, including adding clauses to this section where product information relates exclusively to interior painting.

EXECUTION

3.1

EXECUTION

Refer to 6700 PAINTING GENERAL for execution clauses.

Modify or extend, including adding clauses to this section where product information relates exclusively to interior painting.

SELECTIONS

For further details on selections go to www.dulux.co.nz/specifier.

Substitutions are not permitted to the following, unless stated otherwise.

SELECTIONS is for providing details of the actual selections to be included in the contract works including model numbers, colours and other information necessary to ensure that the correct materials are supplied and installed

Customise the attached schedules or substitute a schedule prepared using the DuSpec+ system.

The following selections highlights Dulux products that have the environment in mind and use Dulux's best water-based systems available. Noted as Best Environmental System.

Refer to DULUX DuSpec+ for up-to-date VOC levels as these are subject to change.

4.1

BACK PAINTING SCHEDULE

Paint 2 coats (including any pre-prime) usually to match exposed face coating. If there is no coating use water resistant clear finish sealer.

Lining type	Extent of back painting
~	~

Amend to suit project requirements

Extent options:	To lining manufacturer's requirements
	Bottom edge & 150mm up
	Paint whole back, bottom & concealed edges of lining
	Paint lining under trim before fixing
	Paint whole back, bottom & concealed edges of trim

Note;

In most cases only a requirement of wet/damp area linings.

Some pre-finished lining may still need backpainting in wet areas.

Paint, stain and clear finishes can have different sorts of requirements.

Some tiled substrates are recommended to have the whole back painted/sealed.

Paperfaced plasterboard substrates - new ceilings

4.2

INTERIOR PAPERFACED PLASTERBOARD NEW - CEILINGS - PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZPR00175
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L
3rd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L

4.3

INTERIOR PAPERFACED PLASTERBOARD NEW - CEILINGS - ULTRA LOW VOC PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU02287
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L
3rd coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L

Best Environmental System

4.4

INTERIOR PAPERFACED PLASTERBOARD NEW - CEILINGS - WET AREAS - PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU00589
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L
3rd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:

System:

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec+ NZDU00834

Wash & Wear Plus Kitchen & Bathroom

Semi-Gloss

DuSpec+ NZDU02790

Best Environmental System

A Level 5 finish is recommended with Semi-Gloss paint system.

4.5

INTERIOR PAPERFACED PLASTERBOARD NEW - CEILINGS - SUPERIOR FINISH

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZPR00182
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L
3rd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L

4.6

INTERIOR PAPERFACED PLASTERBOARD NEW - CEILINGS - ULTRA LOW VOC SUPERIOR FINISH

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU02290
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L
3rd coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L

Best Environmental System

4.7

INTERIOR PAPERFACED PLASTERBOARD NEW - CEILINGS - WET AREAS - SUPERIOR FINISH

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU00594
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L
3rd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:

System:

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec+ NZDU00831

Wash & Wear Plus Kitchen & Bathroom

Semi-Gloss

DuSpec+ NZDU02787

Best Environmental System

Paperfaced plasterboard substrates - new walls

4.8

INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU03737
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L
3rd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01391
Semi-Gloss	DuSpec+ NZDU02510
Gloss	DuSpec+ NZDU01400
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU02684
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00725
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU00524

A level 5 finish is recommended with Semi-Gloss and Gloss paint systems.

4.9

INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - ULTRA LOW VOC PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU00732
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX EnvirO2 Interior @ 16 m²/L
3rd coat:	DULUX EnvirO2 Interior @ 16 m²/L

Best Environmental System

4.10

INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - WET AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU00834
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Semi-Gloss	DuSpec+ NZDU02790

Best Environmental System

A Level 5 finish is recommended with Semi-Gloss paint system

4.11

INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - CLINICAL AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZPR00139
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L
3rd coat:	DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

SteriGuard is recommended for broadwall areas that undergo frequent cleaning; wards, waiting rooms, common dining rooms and public areas.

Best Environmental System

4.12

INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - HIGH SERVICE AREAS - LOW-SHEEN - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZPR00331
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
3rd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.13

INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - HIGH SERVICE AREAS - LOW-SHEEN

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04580
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

4.14

INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - HIGH SERVICE AREAS - SEMI-GLOSS

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack water-based acrylic epoxy
System:	DuSpec+ NZDU01692
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
2nd coat:	DULUX Enviropoxy WBE @ 50 microns DFT
3rd coat:	DULUX Enviropoxy WBE @ 50 microns DFT

Luxepoxy 4 White Primer has been specified for durability. For best aesthetic results a Level 5 finish is required. Contact Dulux representative for a Level 5 specification if aesthetics is critical.

4.15

INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - SUPERIOR FINISH

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU03756
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L
3rd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01396
Semi-Gloss	DuSpec+ NZDU02511
Gloss	DuSpec+ NZDU01401
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU02685
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00724
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU02344

4.16

INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - ULTRA LOW VOC SUPERIOR FINISH

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04233
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX EnvirO2 Interior @ 16 m²/L
3rd coat:	DULUX EnvirO2 Interior @ 16 m²/L

Best Environmental System

4.17

INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - WET AREAS - SUPERIOR FINISH

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU00831
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Semi-Gloss	DuSpec+ NZDU02787

Best Environmental System

4.18

INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - HIGH SERVICE AREAS - SUPERIOR FINISH - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZPR00332
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
3rd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.19

INTERIOR PAPERFACED PLASTERBOARD NEW - WALLS - HIGH SERVICE AREAS - SUPERIOR FINISH

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZPR00336
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

Fibre cement sheet substrates - new ceilings

4.20

INTERIOR FIBRE CEMENT SHEET NEW - CEILINGS - PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZPR00196
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L
3rd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L

4.21

INTERIOR FIBRE CEMENT SHEET NEW - CEILINGS - ULTRA LOW VOC PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU04243
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L
3rd coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L

Best Environmental System

4.22

INTERIOR FIBRE CEMENT SHEET NEW - CEILINGS - WET AREAS - PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU04235
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L
3rd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:

System:

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec+ NZDU04244

Wash & Wear Plus Kitchen & Bathroom

Semi-Gloss

DuSpec+ NZDU04236

Best Environmental System

Fibre cement sheet substrates - new walls

4.23

INTERIOR FIBRE CEMENT SHEET NEW - WALLS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU03698
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L
3rd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU04237
Semi-Gloss	DuSpec+ NZDU04238
Gloss	DuSpec+ NZDU04239
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU04240
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU04241
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU04242

A Level 5 finish is recommended with Semi-Gloss and Gloss paint systems.

4.24

INTERIOR FIBRE CEMENT SHEET NEW - WALLS - ULTRA LOW VOC PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04243
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX EnvirO2 Interior @ 16 m²/L
3rd coat:	DULUX EnvirO2 Interior @ 16 m²/L

Best Environmental System

4.25

INTERIOR FIBRE CEMENT SHEET NEW - WALLS - WET AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04244
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Semi-Gloss	DuSpec+ NZDU04245

Best Environmental System

4.26

INTERIOR FIBRE CEMENT SHEET NEW - WALLS - CLINICAL AREA - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZPR04245
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L
3rd coat:	DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

SteriGuard is recommended for broadwall areas that undergo frequent cleaning; wards, waiting rooms, common dining rooms and public areas.

Best Environmental System

4.27

INTERIOR FIBRE CEMENT SHEET NEW - WALLS - HIGH SERVICE AREAS - LOW SHEEN - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZPR00333
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
3rd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.28

INTERIOR FIBRE CEMENT SHEET NEW - WALLS - HIGH SERVICE AREAS - LOW SHEEN

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04699
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

4.29

INTERIOR FIBRE CEMENT SHEET NEW - WALLS - HIGH SERVICE AREAS

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack water-based acrylic epoxy
System:	DuSpec+ NZDU04396
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
2nd coat:	DULUX Enviropoxy WBE @ 50 microns DFT
3rd coat:	DULUX Enviropoxy WBE @ 50 microns DFT

4.30

INTERIOR FIBRE CEMENT SHEET NEW - WALLS - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZDU04397
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
2nd coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
3rd coat:	DULUX Maxiproof (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00063

Fibrous plaster substrates - new ceilings

4.31

INTERIOR FIBROUS PLASTER NEW - CEILINGS - PAINT

Gloss level:	Flat
Coating type:	Solvent-based primer + water-based topcoat
System:	DuSpec+ NZPR00188
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Oil-Based Primer Sealer & Undercoat @ 12 m²/L
2nd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L
3rd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L

Fibrous plaster substrates - new walls

4.32

INTERIOR FIBROUS PLASTER NEW - WALLS - PAINT

Gloss level:	Low Sheen
Coating type:	Solvent-based primer + water-based topcoat
System:	DuSpec+ NZDU03751
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Oil-Based Primer Sealer & Undercoat @ 12 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L
3rd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01372
Semi-Gloss	DuSpec+ NZDU02488
Gloss	DuSpec+ NZDU01411
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU02656
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00703
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU02349

A Level 5 finish is recommended with Semi-Gloss and Gloss paint systems.

Masonry and cementitious substrates - new ceilings

4.33

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC NEW - CEILINGS -PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZPR00210
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L
3rd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L

4.34

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC NEW - CEILINGS - ULTRA LOW VOC PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU04398
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L
3rd coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L

Best Environmental System

4.35

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC NEW - CEILINGS - WET AREAS - PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU00611
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L
3rd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:

System:

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec+ NZDU00886

Wash & Wear Plus Kitchen & Bathroom

Semi-Gloss

DuSpec+ NZDU02808

Masonry and cementitious substrates - new walls

4.36

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC NEW - WALLS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU03746
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L
3rd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01367
Semi-Gloss	DuSpec+ NZDU02470
Gloss	DuSpec+ NZDU01414
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU02640
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00705
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU02347

4.37

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC NEW - WALLS - ULTRA LOW VOC PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04399
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX EnvirO2 Interior @ 16 m²/L
3rd coat:	DULUX EnvirO2 Interior @ 16 m²/L

Best Environmental System

4.38

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC NEW - WALLS - WET AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU00886
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Semi-Gloss	DuSpec+ NZDU02808

Best Environmental System

4.39

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC NEW - WALLS - HI SERVICE AREAS - LOW SHEEN - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZPR00316
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
3rd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.40

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC NEW - WALLS - HI SERVICE AREAS - LOW SHEEN

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04873
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

4.41

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC NEW - WALLS - HI SERVICE AREAS - SEMI-GLOSS

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack water-based acrylic epoxy
System:	DuSpec+ NZDU01640
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
2nd coat:	DULUX Enviropoxy WBE @ 50 microns DFT
3rd coat:	DULUX Enviropoxy WBE @ 50 microns DFT

4.42

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC NEW - WALLS - WATER-BASED CLEAR SEALER

Gloss level:	Semi-Gloss
Coating type:	Water-based clear
System:	DuSpec+ NZAV00044
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX AVISTA Waterbased Concrete Sealer @ 5-10 m²/L
2nd coat:	DULUX AVISTA Waterbased Concrete Sealer @ 5-10 m²/L

Best Environmental System

4.43

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC NEW - WALLS - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00027
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
Preparation:	DULUX AcraTex 400/4 Tiltwash @ 7 m²/L
1st coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
2nd coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
3rd coat:	DULUX Maxiproof (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00076

4.44

INTERIOR MASONRY NEW - WALLS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU03745
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L
3rd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01381
Semi-Gloss	DuSpec+ NZDU02476
Gloss	DuSpec+ NZDU01404
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU02678
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00713
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU02352

4.45

INTERIOR MASONRY NEW - WALLS - ULTRA LOW VOC PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU00729
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
2nd coat:	DULUX EnvirO2 Interior @ 16 m²/L
3rd coat:	DULUX EnvirO2 Interior @ 16 m²/L

Best Environmental System

4.46

INTERIOR MASONRY NEW - WALLS - WET AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU00887
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Semi-Gloss	DuSpec+ NZDU02807

Best Environmental System

4.47

INTERIOR MASONRY NEW - WALLS - CLINICAL AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZPR00132
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L
3rd coat:	DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

SteriGuard is recommended for broadwall areas that undergo frequent cleaning; wards, waiting rooms, common dining rooms and public areas.

Best Environmental System

4.48

INTERIOR MASONRY NEW - WALLS - HIGH SERVICE AREAS - LOW SHEEN - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZPR00334
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
3rd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.49

INTERIOR MASONRY NEW - WALLS - HIGH SERVICE AREAS - LOW SHEEN

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04701
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

4.50

INTERIOR MASONRY NEW - WALLS - HIGH SERVICE AREAS - SEMI-GLOSS

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy + two pack water-based acrylic epoxy
System:	DuSpec+ NZDU01641
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
2nd coat:	DULUX Enviropoxy WBE @ 50 microns DFT
3rd coat:	DULUX Enviropoxy WBE @ 50 microns DFT

4.51

INTERIOR MASONRY NEW - WALLS - WATER-BASED CLEAR SEALER

Gloss level:	Semi-Gloss
Coating type:	Water-based clear
System:	DuSpec+ NZAV00045
1st coat:	DULUX AVISTA Waterbased Concrete Sealer @ 5-10 m²/L
2nd coat:	DULUX AVISTA Waterbased Concrete Sealer @ 5-10 m²/L

Best Environmental System

4.52

INTERIOR MASONRY NEW - WALLS - WATER REPELLENT CLEAR SEALER

Gloss level:	Matt
Coating type:	Single-component penetrating silane-siloxane system
System:	Fosroc (supplied by Dulux) – refer to Fosroc Nitocote SN502 TDS
1st coat	FOSROC Nitocote SN502 @ 5 m²/L (theoretical)
2nd coat:	FOSROC Nitocote SN502 @ 5 m²/L (theoretical)

FOSROC Nitocote SN502 penetrates substrate so no DFT applies. Contact a DULUX representative or FOSROC for further information regarding specified FOSROC coating system. Note this is not waterproofing.

4.53

INTERIOR MASONRY NEW - WALLS - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00020
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat	DULUX Maxiproof (Gloss) @ 8 m²/L
2nd coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
3rd coat:	DULUX Maxiproof (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00067

Masonry and cementitious substrates - new floors

4.54

INTERIOR CONCRETE FLOORS NEW - WATER-BASED 2 PACK EPOXY - PROTECTIVE COATING

Gloss level:	Semi-Gloss
Coating type:	Two pack water-based epoxy
System:	DuSpec+ NZDU02693
1st coat:	DULUX Luxafloor ECO2 @ 65 microns DFT
2nd coat:	DULUX Luxafloor ECO2 @ 65 microns DFT

For full protective coating systems refer to 6744DP DULUX PROTECTIVE COATINGS

4.55

INTERIOR CONCRETE FLOORS NEW - HEAVY DUTY PROTECTIVE COATING

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy
System:	DuSpec+ NZDU02311
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Durebild STE @ 125 microns DFT

For full protective coating systems refer to 6744DP DULUX PROTECTIVE COATINGS

4.56

INTERIOR CONCRETE FLOORS NEW - UV EXPOSED - HEAVY DUTY PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + UV resistant two pack solvent-based acrylic polyurethane topcoat
System:	DuSpec+ NZDU03543
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Durebild STE @ 125 microns DFT
3rd coat:	DULUX Weathermax HBR @ 100 microns DFT

A slip resistant aggregate must be added to this system.

For full protective coating systems refer to 6744DP DULUX PROTECTIVE COATINGS

4.57

INTERIOR CONCRETE FLOORS NEW - SOLVENT-BASED DUST SEALER CLEAR

Gloss level:	Gloss
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00080
1st coat:	DULUX Maxiproof (Gloss) @ 8 m²/L

4.58

INTERIOR CONCRETE FLOORS NEW - WATER-BASED DUST SEALER CLEAR

Gloss level:	Satin
Coating type:	Water-based clear
System:	DuSpec+ NZAV00008
1st coat:	DULUX AVISTA Waterbased Concrete Sealer @ 5-10 m²/L

Best Environmental System

4.59

INTERIOR CONCRETE FLOORS NEW - WATER-BASED CLEAR

Gloss level:	Semi-Gloss
Coating type:	Water-based clear
System:	DuSpec+ AUAV00029
1st coat:	DULUX AVISTA Waterbased Concrete Sealer @ 5-10 m²/L
2nd coat:	DULUX AVISTA Waterbased Concrete Sealer @ 5-10 m²/L
3rd coat:	DULUX AVISTA Waterbased Concrete Sealer @ 5-10 m²/L (optional)

Add Dulux Avista Slip Reducing Additive for a slip resistant finish.

Best Environmental System

4.60

INTERIOR CONCRETE FLOORS NEW - HIGH DEMAND SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00044
1st coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
2nd coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
3rd coat:	DULUX Maxiproof (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00079

Timber substrates - new walls - paint

4.61

INTERIOR TIMBER NEW - WALLS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU03780
Fire rating:	Group Number 3, Report Number 5095, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L
3rd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01378
Semi-Gloss	DuSpec+ NZDU02493
Gloss	DuSpec+ NZDU01403
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU02681
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00711
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU02354

4.62

INTERIOR TIMBER NEW - WALLS - HIGH SERVICE AREAS - LOW SHEEN - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZPR00335
Fire rating:	Group Number 3, Report Number 5095, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
3rd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.63

INTERIOR TIMBER NEW - WALLS - HIGH SERVICE AREAS - LOW SHEEN

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04607
Fire rating:	Group Number 3, Report Number 5095, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

4.64

INTERIOR TIMBER NEW - WALLS - HIGH SERVICE AREAS - SEMI-GLOSS

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack water-based acrylic epoxy
System:	DuSpec+ NZDU01664
Fire rating:	Group Number 3, Report Number 5095, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
2nd coat:	DULUX Enviropoxy WBE @ 50 microns DFT
3rd coat:	DULUX Enviropoxy WBE @ 50 microns DFT

Timber substrates - new ceilings, walls, trim, doors, frames - clear and stained

4.65

INTERIOR TIMBER NEW - WALLS, TRIM, DOORS, FRAMES AND CEILINGS - CLEAR

Gloss level:	Satin
Coating type:	Water-based clear
System:	DuSpec+ NZIN00132
Fire rating:	Group Number 3, Report Number 5095, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Intergrain UltraClear Interior @ 13 m²/L
2nd coat:	DULUX Intergrain UltraClear Interior @ 13 m²/L
3rd coat:	DULUX Intergrain UltraClear Interior @ 13 m²/L

Refer to table below for alternative gloss level

Gloss level:	System:
Gloss	DuSpec+ NZIN00165

Best Environmental System

4.66

INTERIOR TIMBER NEW - WALLS, TRIM, DOORS, FRAMES AND CEILINGS - STAINED

Gloss level:	Satin
Coating type:	Water-based - stain + clear
System:	DuSpec+ NZIN00132
Fire rating:	Group Number 3, Report Number 5095, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Intergrain UltraClear (Tinted) @ 13 m²/L
2nd coat:	DULUX Intergrain UltraClear @ 13 m²/L
3rd coat:	DULUX Intergrain UltraClear @ 13 m²/L

Refer to table below for alternative gloss level

Gloss level:	System:
Gloss	DuSpec+ NZ_SD08873

Intergrain UltraClear can be tinted to a wide range of colours. Tint only the number of coats required to achieve the desired depth of colour, with clear coats on top to complete the 3 coat system.

Best Environmental System

Timber substrates - new trim, doors, frames, etc - paint

4.67

INTERIOR TIMBER NEW TRIM, DOORS AND FRAMES - WATER-BASED PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based enamel
System:	DuSpec+ NZDU01045
Fire rating:	Group Number 3, Report Number 5095, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Aquanamel @ 16 m²/L
3rd coat:	DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Sheen	DuSpec+ NZDU02577
Gloss	DuSpec+ NZDU02421

For cedar substrates 1 Step Oil-Based Primer Sealer & Undercoat is recommended.

Best Environmental System

4.68

INTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - SOLVENT-BASED PAINT

Gloss level:	Semi-Gloss
Coating type:	Solvent-based enamel
System:	DuSpec+ NZDU01266
Fire rating:	Group Number 3, Report Number 5352, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Oil-Based Primer Sealer & Undercoat @ 12 m²/L
2nd coat:	DULUX Super Enamel @ 16 m²/L
3rd coat:	DULUX Super Enamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZDU03742

4.69

INTERIOR TIMBER NEW - WALLS, TRIM, DOORS, FRAMES & CEILINGS - HI SERVICE AREAS - LOW SHEEN - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZPR00335
Fire rating:	Group Number 3, Report Number 5095, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
3rd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.70

INTERIOR TIMBER NEW - WALLS, TRIM, DOORS, FRAMES & CEILINGS - HI SERVICE AREAS - LOW SHEEN

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04607
Fire rating:	Group Number 3, Report Number 5095, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

4.71

INTERIOR TIMBER NEW - WALLS, TRIM, DOORS, FRAMES & CEILINGS - HI SERVICE AREAS - SEMI-GLOSS

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack water-based acrylic epoxy
System:	DuSpec+ NZDU01664
Fire rating:	Group Number 3, Report Number 5095, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
2nd coat:	DULUX Enviropoxy WBE @ 50 microns DFT
3rd coat:	DULUX Enviropoxy WBE @ 50 microns DFT

Timber substrates - new floors

4.72

INTERIOR TIMBER NEW - FLOORS - CLEAR

Gloss level:	Satin
Coating type:	Water-based - clear
System:	DuSpec+ NZIN00157
1st coat:	DULUX Intergrain UltraFloor @ 11 m²/L
2nd coat:	DULUX Intergrain UltraFloor @ 11 m²/L
3rd coat:	DULUX Intergrain UltraFloor @ 11 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZIN00068

Best Environmental System

4.73

INTERIOR TIMBER NEW - FLOORS - HIGH DEMAND SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00040
1st coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
2nd coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
3rd coat:	DULUX Maxiproof (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00087

4.74

INTERIOR TIMBER NEW - FLOORS - STAINED

Gloss level:	Satin
Coating type:	Water-based - stain+ clear
System:	DuSpec+ NZIN00158
1st coat:	DULUX Intergrain UltraDeck Timber Stain @ 9 m²/L
2nd coat:	DULUX Intergrain UltraFloor @ 11 m²/L
3rd coat:	DULUX Intergrain UltraFloor @ 11 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZIN00067

Intergrain UltraDeck Timber Stain can be tinted to a wide range of colours. Use the appropriate number of coats to achieve the desired depth of colour, with clear coats of Intergrain UltraFloor on top to complete the 3 coat system.

Best Environmental System

Metal substrates - new

4.75

INTERIOR MILD STEEL NEW - PRIMER FINISH

Gloss level:	Metallic Lustre
Coating type:	Single pack solvent zinc phosphate primer
System:	DuSpec+ NZDU00667
1st coat:	DULUX Luxaprime ZP @ 75 microns DFT (shop applied)

4.76

INTERIOR MILD STEEL NEW - DECORATIVE PAINT

Gloss level:	Gloss
Coating type:	Single pack zinc phosphate primer + water-based enamel
System:	DuSpec+ NZDU02447
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Luxaprime ZP @ 75 microns DFT (shop applied)
2nd coat:	DULUX Aquanamel @ 16 m²/L
3rd coat:	DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Sheen	DuSpec+ NZDU02608
Semi-Gloss	DuSpec+ NZDU01131

Best Environmental System

4.77

INTERIOR MILD STEEL NEW - LIGHT INDUSTRIAL COATING

Gloss level:	Gloss
Coating type:	Single pack solvent-based zinc phosphate primer + Solvent-based enamel
System:	DuSpec+ NZDU02279
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Luxaprime ZP @ 75 microns DFT (shop applied)
2nd coat:	DULUX Metalshield QD Enamel @ 8.5 m²/L
3rd coat:	DULUX Metalshield QD Enamel @ 8.5 m²/L

4.78

INTERIOR MILD STEEL NEW - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based zinc phosphate epoxy primer + two pack solvent-based polyurethane
System:	DuSpec+ NZDU00638
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Durepon FRX @ 75 microns DFT
2nd coat:	DULUX Luxathane HPX @ 50 microns DFT

Refer to table below for alternative topcoat gloss level

Gloss level:	System:	2nd coat:
Satin	DuSpec+ NZDU00942	DULUX Luxathane SPX
Matt	DuSpec+ NZDU04388	DULUX Luxathane MPX

4.79

INTERIOR MILD STEEL NEW - PROTECTIVE COATING - METALLIC FINISH

Gloss level:	Gloss
Coating type:	Two pack solvent-based zinc phosphate epoxy primer+ two pack solvent-based metallic polyurethane + two pack solvent-based enamel
System:	DuSpec+ NZDU00642
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Durepon FRX @ 75 microns DFT
1st coat:	DULUX Quantum FX @ 55 microns DFT
2nd coat:	DULUX Quantum Clearcoat @ 45 microns DFT

4.80

INTERIOR GALVANIZED NEW - WATER-BASED DECORATIVE PAINT

Gloss level:	Gloss
Coating type:	Water-based zinc primer + water-based enamel
System:	DuSpec+ NZDU02373
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Precision All Metal Primer @ 14 m²/L
2nd coat:	DULUX Aquanamel @ 16 m²/L
3rd coat:	DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Sheen	DuSpec+ NZDU02546
Semi-Gloss	DuSpec+ NZDU00987

Best Environmental System

4.81

INTERIOR GALVANIZED NEW - LIGHT INDUSTRIAL COATING

Gloss level:	Gloss
Coating type:	Single pack zinc phosphate primer + Solvent-based enamel
System:	DuSpec+ NZDU02278
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Metalshield All Surface Primer @ 15 m²/L
2nd coat:	DULUX Metalshield QD Enamel @ 8.5 m²/L
3rd coat:	DULUX Metalshield QD Enamel @ 8.5 m²/L

4.82

INTERIOR GALVANIZED NEW - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based polyurethane
System:	DuSpec+ NZDU00640
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Luxathane HPX @ 50 microns DFT

Refer to table below for alternative topcoat gloss level

Gloss level:	System:	2nd coat:
Satin	DuSpec+ NZDU04298	DULUX Luxathane SPX
Matt	DuSpec+ NZPC00142	DULUX Luxathane MPX

4.83

INTERIOR GALVANIZED NEW - PROTECTIVE COATING - METALLIC FINISH

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based metallic polyurethane + two pack solvent-based acrylic clear polyurethane topcoat
System:	DuSpec+ NZDU00665
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.5
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Quantum FX @ 55 microns DFT
3rd coat:	DULUX Quantum Clearcoat @ 45 microns DFT

4.84

INTERIOR NON-FERROUS METAL NEW - DECORATIVE PAINT

Gloss level:	Gloss
Coating type:	Water-based enamel
System:	DuSpec+ NZDU02419
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
2nd coat:	DULUX Aquanamel @ 16 m²/L
3rd coat:	DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Sheen	DuSpec+ NZDU02573
Semi-Gloss	DuSpec+ NZDU01088

Best Environmental System

4.85

INTERIOR NON-FERROUS METAL NEW - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack solvent-based polyurethane
System:	DuSpec+ NZDU00630
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
2nd coat:	DULUX Luxathane HPX @ 50 microns DFT

Refer to table below for alternative topcoat gloss level

Gloss level:	System:	2nd coat:
Satin	DuSpec+ NZDU00955	DULUX Luxathane SPX
Matt	DuSpec+ NZPC00143	DULUX Luxathane MPX

4.86

INTERIOR NON-FERROUS METAL NEW - PROTECTIVE COATING - METALLIC FINISH

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack solvent-based metallic polyurethane + two pack solvent-based acrylic clear polyurethane topcoat
System:	DuSpec+ NZDU00655
Fire rating:	Group Number 1-S, Report Number 5054, BPS, Table 8.5.2.1: Material Group Numbers for some substrate and coating combinations.
1st coat:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
2nd coat:	DULUX Quantum FX @ 55 microns DFT
3rd coat:	DULUX Quantum Clearcoat @ 45 microns DFT

Paperfaced plasterboard substrates - existing ceilings

4.87

INTERIOR PAPERFACED PLASTERBOARD EXISTING - CEILINGS - PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZPR00218
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L
2nd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L

4.88

INTERIOR PAPERFACED PLASTERBOARD EXISTING - CEILINGS - ULTRA LOW VOC PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU02290
Spot prime:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
1st coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L
2ndcoat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L

Best Environmental System

4.89

INTERIOR PAPERFACED PLASTERBOARD EXISTING - CEILINGS - WET AREAS - PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU00603
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L
2nd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:

System:

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec+ NZDU00868

Wash & Wear Plus Kitchen & Bathroom

Semi-Gloss

DuSpec+ NZDU02819

A level 5 finish is recommended with Semi-Gloss paint system

Best Environmental System

4.90

INTERIOR PAPERFACED PLASTERBOARD EXISTING - CEILINGS - SUPERIOR FINISH

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZPR00220
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L
3rd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L

4.91

INTERIOR PAPERFACED PLASTERBOARD EXISTING - CEILINGS - ULTRA LOW VOC SUPERIOR FINISH

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU04401
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L
3rd coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L

Best Environmental System

4.92

INTERIOR PAPERFACED PLASTERBOARD EXISTING - CEILINGS - WET AREAS - SUPERIOR FINISH

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU00598
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L
3rd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:

System:

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec+ NZDU00873

Wash & Wear Plus Kitchen & Bathroom

Semi-Gloss

DuSpec+ NZDU03752

Best Environmental System

Paperfaced plasterboard substrates - existing walls

4.93

INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU03754
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear 101 @ 16 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01384
Semi-Gloss	DuSpec+ NZDU02504
Gloss	DuSpec+ NZDU01407
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU02666
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00719
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU02356

A Level 5 finish is recommended with Semi-Gloss and Gloss paint systems.

Dulux Wash & Wear Plus Super Hide is recommended for painting over dark colours.

4.94

INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - ULTRA LOW VOC PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU00728
Spot prime:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
1st coat:	DULUX EnvirO2 Interior @ 16 m²/L
2nd coat:	DULUX EnvirO2 Interior @ 16 m²/L

Best Environmental System

4.95

INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - WET AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU00868
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L
2nd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Semi-Gloss	DuSpec+ NZDU02819

A Level 5 finish is recommended with Semi-Gloss paint system.

Best Environmental System

4.96

INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - CLINICAL AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZPR00135
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Professional SteriGuard Acrylic @ 16 m²/L
2nd coat:	DULUX Professional SteriGuard Acrylic @ 16 m²/L

SteriGuard is recommended for broadwall areas that undergo frequent cleaning; wards, waiting rooms, common dining rooms and public areas.

Best Environmental System

4.97

INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - HIGH SERVICE AREAS - LOW SHEEN - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZPR00337
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.98

INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - HIGH SERVICE AREAS - LOW SHEEN

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04581
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

4.99

INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - HIGH SERVICE AREAS - SEMI-GLOSS

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack water-based acrylic epoxy
System:	DuSpec+ NZDU01655
Spot prime:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
1st coat:	DULUX Enviropoxy WBE @ 50 microns DFT
2nd coat:	DULUX Enviropoxy WBE @ 50 microns DFT

Luxepoxy 4 White has been specified for durability

4.100

INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - SUPERIOR FINISH

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU03755
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L
3rd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01382
Semi-Gloss	DuSpec+ NZDU02508
Gloss	DuSpec+ NZDU01406
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU02667
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00716
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU02357

Dulux Wash & Wear Plus Super Hide is recommended for painting over dark colours.

4.101

INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - ULTRA LOW VOC SUPERIOR FINISH

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04402
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX EnvirO2 Interior @ 16 m²/L
3rd coat:	DULUX EnvirO2 Interior @ 16 m²/L

Best Environmental System

4.102

INTERIOR PAPERFACED PLASTERBOARD EXISTING - WALLS - WET AREAS - SUPERIOR FINISH

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU00873
1st coat:	DULUX Professional Ultra 5 Surfacer Prep & Finish @ 3 m²/L
2nd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L
3rd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Semi-Gloss	DuSpec+ NZDU03752

Best Environmental System

Fibre cement sheet substrates - existing ceilings

4.103

INTERIOR FIBRE CEMENT SHEET EXISTING - CEILINGS - PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZPR04409
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L
2nd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L

4.104

INTERIOR FIBRE CEMENT SHEET EXISTING - CEILINGS - ULTRA LOW VOC PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU04408
Spot prime:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
1st coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L
2nd coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L

Best Environmental System

4.105

INTERIOR FIBRE CEMENT SHEET EXISTING - CEILINGS - WET AREAS - PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU04409
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L
2nd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:

System:

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec+ NZDU04740

Wash & Wear Plus Kitchen & Bathroom

Semi-Gloss

DuSpec+ NZDU04638

Best Environmental System

Fibre cement sheet substrates - existing walls

4.106

INTERIOR FIBRE CEMENT SHEET EXISTING - WALLS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU02509
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear 101 @ 16 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01390
Semi-Gloss	DuSpec+ NZDU02509
Gloss	DuSpec+ NZDU01408
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU02668
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00721
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU02355

A Level 5 finish is recommended with Semi-Gloss and Gloss paint systems.

Dulux Wash & Wear Plus Super Hide is recommended for painting over dark colours.

4.107

INTERIOR FIBRE CEMENT SHEET EXISTING - WALLS - ULTRA LOW VOC PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04408
Spot prime:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
1st coat:	DULUX EnvirO2 Interior @ 16 m²/L
2nd coat:	DULUX EnvirO2 Interior @ 16 m²/L

Best Environmental System

4.108

INTERIOR FIBRE CEMENT SHEET EXISTING - WALLS - WET AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04740
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L
2nd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Semi-Gloss	DuSpec+ NZDU04741

Best Environmental System

4.109

INTERIOR FIBRE CEMENT SHEET EXISTING - WALLS - CLINICAL AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04411
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L
2nd coat:	DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

SteriGuard is recommended for broadwall areas that undergo frequent cleaning; wards, waiting rooms, common dining rooms and public areas.

Best Environmental System

4.110

INTERIOR FIBRE CEMENT SHEET EXISTING - WALLS - HIGH SERVICE AREAS - LOW SHEEN - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZDU04411
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.111

INTERIOR FIBRE CEMENT SHEET EXISTING - WALLS - HIGH SERVICE AREAS - LOW SHEEN

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04876
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

4.112

INTERIOR FIBRE CEMENT SHEET EXISTING - WALLS - HIGH SERVICE AREAS - SEMI-GLOSS

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy + two pack water-based acrylic epoxy
System:	DuSpec+ NZDU04428
Spot prime:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
1st coat:	DULUX Enviropoxy WBE @ 50 microns DFT
2nd coat:	DULUX Enviropoxy WBE @ 50 microns DFT

4.113

INTERIOR FIBRE CEMENT SHEET EXISTING - WALLS - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZDU04429
Spot prime:	DULUX Maxiproof (Gloss) @ 8 m²/L
1st coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
2nd coat:	DULUX Maxiproof (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00093

Fibrous plaster substrates - existing ceilings

4.114

INTERIOR FIBROUS PLASTER EXISTING - CEILINGS - PAINT

Gloss level:	Flat
Coating type:	Solvent-based primer + water-based topcoat
System:	DuSpec+ NZPR00212
Spot prime:	DULUX 1 Step Oil-Based Primer Sealer & Undercoat @ 12 m²/L
1st coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L
2nd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L

Fibrous plaster substrates - existing walls

4.115

INTERIOR FIBROUS PLASTER EXISTING - WALLS - PAINT

Gloss level:	Low Sheen
Coating type:	Solvent-based primer + water-based topcoat
System:	DuSpec+ NZDU03750
Spot prime:	DULUX 1 Step Oil-Based Primer Sealer & Undercoat @ 12 m²/L
1st coat:	DULUX Wash & Wear 101 @ 16 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01366
Semi-Gloss	DuSpec+ NZDU02472
Gloss	DuSpec+ NZDU01413
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU04430
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00709
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU02346

A Level 5 finish is recommended with Semi-Gloss and Gloss paint systems.

Dulux Wash & Wear Plus Super Hide is recommended for painting over dark colours.

Masonry and cementitious substrates - existing ceilings

4.116

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC EXISTING - CEILINGS - PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZPR00190
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L
2nd coat:	DULUX Professional Ceiling Flat @ 12.8 m²/L

4.117

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC EXISTING - CEILINGS - ULTRA LOW VOC PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU04432
Spot prime:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
1st coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L
2nd coat:	DULUX EnvirO2 Ceiling Flat @ 16 m²/L

Best Environmental System

4.118

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC EXISTING - CEILINGS - WET AREAS - PAINT

Gloss level:	Flat
Coating type:	Water-based
System:	DuSpec+ NZDU00612
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L
2nd coat:	DULUX Ceiling White Plus Kitchen & Bathroom @ 12 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:

System:

Wash & Wear Plus Kitchen & Bathroom

Low Sheen

DuSpec+ NZDU00915

Wash & Wear Plus Kitchen & Bathroom

Semi-Gloss

DuSpec+ NZDU02814

Masonry and cementitious substrates - existing walls

4.119

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC EXISTING - WALLS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU03743
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear 101 @ 16 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01376
Semi-Gloss	DuSpec+ NZDU02483
Gloss	DuSpec+ NZDU01409
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU02659
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00704
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU02351

Dulux Wash & Wear Plus Super Hide is recommended for painting over dark colours.

4.120

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC EXISTING WALLS-ULTRA LOW VOC - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04433
Spot prime:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
1st coat:	DULUX EnvirO2 Interior @ 16 m²/L
2nd coat:	DULUX EnvirO2 Interior @ 16 m²/L

Best Environmental System

4.121

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC EXISTING - WALLS - WET AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU00915
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L
2nd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Semi-Gloss	DuSpec+ NZDU02814

Best Environmental System

4.122

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC EXISTING - WALLS - HI SERVICE AREAS - LOW SHEEN - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZPR00320
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.123

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC EXISTING - WALLS - HI SERVICE AREAS - LOW SHEEN

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04594
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

4.124

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC EXISTING - WALLS - HIGH SERVICE AREA - SEMI-GLOSS

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack water-based acrylic epoxy
System:	DuSpec+ NZDU01680
Spot prime:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
1st coat:	DULUX Enviropoxy WBE @ 50 microns DFT
2nd coat:	DULUX Enviropoxy WBE @ 50 microns DFT

4.125

INTERIOR TILT-UP, PRECAST & OFF THE FORM CONC EXISTING -WALLS - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00018
Spot prime:	DULUX Maxiproof (Gloss) @ 8 m²/L
1st coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
2nd coat:	DULUX Maxiproof (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00062

4.126

INTERIOR MASONRY EXISTING - WALLS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU03744
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear 101 @ 16 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01371
Semi-Gloss	DuSpec+ NZDU02469
Gloss	DuSpec+ NZDU01412
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU02654
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00699
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU02348

Dulux Wash & Wear Plus Super Hide is recommended for painting over dark colours.

4.127

INTERIOR MASONRY EXISTING - WALLS - ULTRA LOW VOC PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04434
Spot prime:	DULUX EnvirO2 Acrylic Sealer Undercoat @ 14 m²/L
1st coat:	DULUX EnvirO2 Interior @ 16 m²/L
2nd coat:	DULUX EnvirO2 Interior @ 16 m²/L

Best Environmental System

4.128

INTERIOR MASONRY EXISTING - WALLS - WET AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU00857
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L
2nd coat:	DULUX Wash & Wear Plus Kitchen & Bathroom @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Semi-Gloss	DuSpec+ NZDU02801

Best Environmental System

4.129

INTERIOR MASONRY EXISTING - WALLS - CLINICAL AREAS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZPR00131
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L
2nd coat:	DULUX Professional SteriGuard Durable Acrylic @ 16 m²/L

SteriGuard is recommended for broadwall areas that undergo frequent cleaning; wards, waiting rooms, common dining rooms and public areas.

Best Environmental System

4.130

INTERIOR MASONRY EXISTING - WALLS - HIGH SERVICE AREAS - LOW SHEEN - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZPR00338
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.131

INTERIOR MASONRY EXISTING - WALLS - HIGH SERVICE AREAS - LOW SHEEN

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04702
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

4.132

INTERIOR MASONRY EXISTING - WALLS - HIGH SERVICE AREAS - SEMI-GLOSS

Gloss level:	Semi-Gloss
Coating type:	Two pack water-based acrylic epoxy
System:	DuSpec+ NZDU01671
Spot prime:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
1st coat:	DULUX Enviropoxy WBE @ 50 microns DFT
2nd coat:	DULUX Enviropoxy WBE @ 50 microns DFT

4.133

INTERIOR MASONRY EXISTING - WALLS - SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00015
Spot prime:	DULUX Maxiproof (Gloss) @ 8 m²/L
1st coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
2nd coat:	DULUX Maxiproof (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00057

Masonry and cementitious substrates - existing floors

4.134

INTERIOR CONCRETE FLOORS EXISTING - HEAVY DUTY - PROTECTIVE COATING

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy
System:	DuSpec+ NZDU02331
1st coat:	DULUX Durebild STE @ 125 microns DFT
2nd coat:	DULUX Durebild STE @ 125 microns DFT

4.135

INTERIOR CONCRETE FLOORS EXISTING - UV EXPOSED - HEAVY DUTY - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + UV resistant two pack solvent-based acrylic polyurethane topcoat
System:	DuSpec+ NZDU03543
1st coat:	DULUX Durebild STE @ 125 microns DFT`
2nd coat:	DULUX Durebild STE @ 125 microns DFT
3rd coat:	DULUX Weathermax HBR @ 100 microns DFT

4.136

INTERIOR CONCRETE FLOORS EXISTING - HIGH DEMAND SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00024
Spot prime:	DULUX Maxiproof (Gloss) @ 8 m²/L
1st coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
2nd coat:	DULUX Maxiproof (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00058

Refer to product data sheet for slip resistance rating

Timber substrates - existing ceilings, walls, trim, doors, frames - clear and stained

4.137

INTERIOR TIMBER EXISTING - WALLS, TRIM, DOORS, FRAMES AND CEILINGS - CLEAR

Gloss level:	Satin
Coating type:	Water-based - clear
System:	DuSpec+ NZIN00131
Spot prime:	DULUX Intergrain UltraClear @ 13 m²/L
1st coat:	DULUX Intergrain UltraClear @ 13 m²/L
2nd coat:	DULUX Intergrain UltraClear @ 13 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZIN00163

Best Environmental System

4.138

INTERIOR TIMBER EXISTING - WALLS, TRIM, DOORS, FRAMES AND CEILINGS - STAINED

Gloss level:	Satin
Coating type:	Water-based - clear - stain + clear
System:	DuSpec+ NZIN00131
Spot prime:	DULUX Intergrain UltraClear (Tinted) @ 13 m²/L
1st coat:	DULUX Intergrain UltraClear @ 13 m²/L
2nd coat:	DULUX Intergrain UltraClear @ 13 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZIN00163

Intergrain UltraClear can be tinted to a wide range of colours. Tint only the number of coats required to achieve the desired depth of colour, with clear coats on top to complete the 3 coat system.

Best Environmental System

Timber substrates - existing trim, doors, frames, etc - paint

4.139

INTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - WATER-BASED PAINT

Gloss level:	Semi-Gloss
Coating type:	Water-based enamel
System:	DuSpec+ NZDU01060
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Aquanamel @ 16 m²/L
2nd coat:	DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Sheen	DuSpec+ NZDU02572
Gloss	DuSpec+ NZDU02408

For cedar substrates 1 Step Oil-Based Primer Sealer Undercoat is recommended.

Best Environmental System

4.140

INTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - SOLVENT-BASED PAINT

Gloss level:	Semi-Gloss
Coating type:	Solvent-based enamel
System:	DuSpec+ NZDU01276
Spot prime:	DULUX 1 Step Oil-Based Primer Sealer & Undercoat @ 12 m²/L
1st coat:	DULUX Super Enamel @ 16 m²/L
2nd coat:	DULUX Super Enamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZDU03741

4.141

INTERIOR TIMBER EXISTING - TRIM, DOORS, FRAMES & CEILINGS - HIGH SERVICE AREAS - LOW SHEEN - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZPR00339
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.142

INTERIOR TIMBER EXISTING - TRIM, DOORS, FRAMES & CEILINGS - HIGH SERVICE AREAS - LOW SHEEN

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04595
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

4.143

INTERIOR TIMBER EXISTING -TRIM, DOORS, FRAMES & CEILINGS - HI SERVICE AREAS - SEMI-GLOSS

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack water-based acrylic epoxy
System:	DuSpec+ NZDU01661
Spot prime:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
1st coat:	DULUX Enviropoxy WBE @ 50 microns DFT
2nd coat:	DULUX Enviropoxy WBE @ 50 microns DFT

Timber substrates - existing walls - paint

4.144

INTERIOR TIMBER EXISTING - WALLS - PAINT

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU03779
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear 101 @ 16 m²/L
2nd coat:	DULUX Wash & Wear 101 @ 16 m²/L

Refer to table below for alternative topcoats

Gloss level:	System:
Matt	DuSpec+ NZDU01380
Semi-Gloss	DuSpec+ NZDU02498
Gloss	DuSpec+ NZDU01405
Wash & Wear Plus Anti- Bac Low Sheen	DuSpec+ NZDU02671
Wash & Wear Plus Super Hide Low Sheen	DuSpec+ NZDU00712
Wash & Wear Plus Super Hide Matt	DuSpec+ NZDU02353

Dulux Wash & Wear Plus Super Hide is recommended for painting over dark colours.

4.145

INTERIOR TIMBER EXISTING - WALLS - HIGH SERVICE AREAS - LOW SHEEN - LOW VOC

Gloss level:	Low Sheen
Coating type:	Water-based primer, sealer, undercoat + two pack water-based polyurethane
System:	DuSpec+ NZPR00339
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L
2nd coat:	DULUX Professional SteriGuard Ultra @ 16 m²/L

4.146

INTERIOR TIMBER EXISTING - WALLS - HIGH SERVICE AREAS - LOW SHEEN

Gloss level:	Low Sheen
Coating type:	Water-based
System:	DuSpec+ NZDU04595
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L
2nd coat:	DULUX Wash & Wear Plus Anti-Scuff @ 16 m²/L

4.147

INTERIOR TIMBER EXISTING - WALLS - HIGH SERVICE AREAS - SEMI-GLOSS

Gloss level:	Semi-Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack water-based acrylic epoxy
System:	DuSpec+ NZDU01661
Spot prime:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
1st coat:	DULUX Enviropoxy WBE @ 50 microns DFT
2nd coat:	DULUX Enviropoxy WBE @ 50 microns DFT

Timber substrates - existing floors

4.148

INTERIOR TIMBER EXISTING - FLOORS - CLEAR

Gloss level:	Satin
Coating type:	Water-based - clear
System:	DuSpec+ NZIN00155
Spot prime:	DULUX Intergrain UltraFloor @ 11 m²/L
1st coat:	DULUX Intergrain UltraFloor @ 11 m²/L
2nd coat:	DULUX Intergrain UltraFloor @ 11 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Semi-Gloss	DuSpec+ NZIN00069

Best Environmental System

4.149

INTERIOR TIMBER EXISTING - FLOORS - HIGH DEMAND SOLVENT-BASED CLEAR

Gloss level:	Matt
Coating type:	Single pack solvent-based moisture cured clear polyurethane
System:	DuSpec+ NZMA00037
Spot prime:	DULUX Maxiproof (Gloss) @ 8 m²/L
1st coat:	DULUX Maxiproof (Gloss) @ 8 m²/L
2nd coat:	DULUX Maxiproof (Matt) @ 8 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZMA00086

4.150

INTERIOR TIMBER EXISTING - FLOORS - STAINED

Gloss level:	Satin
Coating type:	Water-based - stain + clear
System:	DuSpec+ NZIN00156
1st coat	DULUX Intergrain UltraDeck Timber Stain @ 9 m²/L
2nd coat:	DULUX Intergrain UltraFloor @ 11 m²/L
3rd coat:	DULUX Intergrain UltraFloor @ 11 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Gloss	DuSpec+ NZIN00161

Best Environmental System

Metal substrates - existing

4.151

INTERIOR MILD STEEL EXISTING - PRIMER FINISH

Gloss level:	Metallic Lustre
Coating type:	Single pack solvent zinc phosphate primer
System:	DuSpec+ NZDU00667
1st coat:	DULUX Luxaprime ZP @ 75 microns DFT

4.152

INTERIOR MILD STEEL EXISTING - DECORATIVE PAINT

Gloss level:	Gloss
Coating type:	Single pack zinc phosphate primer + water-based enamel topcoat
System:	DuSpec+ NZDU02376
Spot prime:	DULUX Luxaprime ZP @ 75 microns DFT
1st coat:	DULUX Aquanamel @ 16 m²/L
2nd coat:	DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Sheen	DuSpec+ NZDU02548
Semi-Gloss	DuSpec+ NZDU00983

Best Environmental System

4.153

INTERIOR MILD STEEL EXISTING - LIGHT INDUSTRIAL COATING

Gloss level:	Gloss
Coating type:	Single pack zinc phosphate primer + Solvent-based enamel
System:	DuSpec+ NZDU02276
Spot prime:	DULUX Metalshield All Surface Primer @ 15 m²/L
1st coat:	DULUX Metalshield QD Enamel @ 8.5 m²/L
2nd coat:	DULUX Metalshield QD Enamel @ 8.5 m²/L

4.154

INTERIOR MILD STEEL EXISTING - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based zinc phosphate epoxy primer+ two pack solvent-based polyurethane
System:	DuSpec+ NZDU00628
Spot prime:	DULUX Durebild STE @ 125 microns DFT
1st coat:	DULUX Luxathane HPX @ 50 microns DFT

Refer to table below for alternative topcoat gloss level

Gloss level:	System:	1st coat:
Satin	DuSpec+ NZDU04435	DULUX Luxathane SPX
Matt	DuSpec+ NZDU04436	DULUX Luxathane MPX

4.155

INTERIOR MILD STEEL EXISTING - PROTECTIVE COATING - METALLIC FINISH

Gloss level:	Gloss
Coating type:	Two pack solvent-based zinc phosphate epoxy primer+ two pack solvent-based metallic polyurethane + two pack solvent-based acrylic clear polyurethane topcoat
System:	DuSpec+ NZDU00664
Spot prime:	DULUX Durepon FRX @ 75 microns DFT
1st coat:	DULUX Quantum FX @ 55 microns DFT
2nd coat:	DULUX Quantum Clearcoat @ 45 microns DFT

4.156

INTERIOR GALVANIZED EXISTING - DECORATIVE PAINT

Gloss level:	Gloss
Coating type:	Water-based zinc primer + water-based enamel
System:	DuSpec+ NZDU02455
Spot prime:	DULUX Precision All Metal Primer @ 14 m²/L
1st coat:	DULUX Aquanamel @ 16 m²/L
2nd coat:	DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Sheen	DuSpec+ NZDU02595
Semi-Gloss	DuSpec+ NZDU01195

Best Environmental System

4.157

INTERIOR GALVANIZED EXISTING - LIGHT INDUSTRIAL COATING

Gloss level:	Gloss
Coating type:	Single pack zinc phosphate primer + solvent-based enamel
System:	DuSpec+ NZDU02251
Spot prime:	DULUX Metalshield All Surface Primer @ 15 m²/L
1st coat:	DULUX Metalshield QD Enamel @ 8.5 m²/L
2nd coat:	DULUX Metalshield QD Enamel @ 8.5 m²/L

4.158

INTERIOR GALVANIZED EXISTING - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based polyurethane
System:	DuSpec+ NZDU04437
Spot prime:	DULUX Durebild STE @ 125 microns DFT
1st coat:	DULUX Luxathane HPX @ 50 microns DFT

Refer to table below for alternative topcoat gloss level

Gloss level:	System:	1st coat:
Satin	DuSpec+ NZDU04438	DULUX Luxathane SPX
Matt	DuSpec+ NZDU04439	DULUX Luxathane MPX

4.159

INTERIOR GALVANIZED EXISTING - PROTECTIVE COATING - METALLIC FINISH

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy + two pack solvent-based metallic polyurethane + two pack solvent-based acrylic clear polyurethane topcoat
System:	DuSpec+ NZDU00648
Spot prime:	DULUX Durebild STE @ 125 microns DFT
1st coat:	DULUX Quantum FX @ 55 microns DFT
2nd coat:	DULUX Quantum Clearcoat @ 45 microns DFT

4.160

INTERIOR NON-FERROUS METAL EXISTING - DECORATIVE PAINT

Gloss level:	Gloss
Coating type:	Water-based enamel
System:	DuSpec+ NZDU02433
Spot prime:	DULUX 1 Step Prep Acrylic Primer Sealer & Undercoat @ 14 m²/L
1st coat:	DULUX Aquanamel @ 16 m²/L
2nd coat:	DULUX Aquanamel @ 16 m²/L

Refer to table below for alternative topcoat gloss level

Gloss level:	System:
Low Sheen	DuSpec+ NZDU02584
Semi-Gloss	DuSpec+ NZDU01116

Best Environmental System

4.161

INTERIOR NON-FERROUS METAL EXISTING - PROTECTIVE COATING

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack solvent-based polyurethane
System:	DuSpec+ NZDU04440
Spot prime:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
1st coat:	DULUX Luxathane HPX @ 50 microns DFT

Refer to table below for alternative topcoat gloss level

Gloss level:	System:	1st coat:
Satin	DuSpec+ NZDU04441	DULUX Luxathane SPX
Matt	DuSpec+ NZDU04442	DULUX Luxathane MPX

4.162

INTERIOR NON-FERROUS METAL EXISTING - PROTECTIVE COATING - METALLIC FINISH

Gloss level:	Gloss
Coating type:	Two pack solvent-based epoxy primer + two pack solvent-based metallic polyurethane + two pack solvent-based acrylic clear polyurethane topcoat
System:	DuSpec+ NZDU00656
Spot prime:	DULUX Luxepoxy 4 White Primer @ 50 microns DFT
1st coat:	DULUX Quantum FX @ 55 microns DFT
2nd coat:	DULUX Quantum Clearcoat @ 45 microns DFT

Specialty finishes

4.163

SPECIALTY FINISHES

Effect:	~
Product:	~
Product data sheet:	~

Refer to DULUX for advice on product selection and appropriate specifications for Specialty Finishes. If the finish you require is not listed below contact a DULUX representative.

For specialty finishes also refer to 6721PP PORTER'S PAINTS INTERIOR PAINTING and 6700PP PORTER'S PAINTS GENERAL PAINTING.

Effect:	Product:	Product data sheet:
Metallic	Design Metallic Effect	DuSpec+ NZDU00417
Chalkboard Black	Design Chalkboard Effect	DuSpec+ NZDU00419
Coloured Chalkboard	Design Coloured chalkboard Effect	DuSpec+ NZDU00421
Concrete	Dulux Concrete Effect	DuSpec+ NZDU00416
Copper	Design Copper Effect	DuSpec+ NZDU00427
Copper Patina	Design Copper Patina Effect	DuSpec+ NZDU00426
Gold	Design Gold Effect	DuSpec+ NZDU00425
Rust	Design Rust Effect	DuSpec+ NZDU00428
Theatre Black	Design Theatre Black	DuSpec+ NZDU00420
Full Gloss metallic polyurethane	Quantum FX Gloss	DuSpec+ NZDU00524
Full Gloss metallic polyurethane	Quantum FX Gloss + Quantum Clearcoat Gloss	DuSpec+ NZDU00525
High gloss lacquer	Luxathane HPX Clear	DuSpec+ NZDU00540