CBI - Reference

Standard, compressed, metal-core, water-resistant and other sheets, to form a substrate to receive decorative finishes Sheet linings as structural bracing when not fixed as part of the framing Timber battens and metal firring channels Angle reinforcement Control joint sections Jointing compounds and joint reinforcing tapes Vapour barriers and thermal and acoustic insulation when fixed with the lining Fixing fibre cement sheet with fasteners, screws and nails, to studs, joists, nogging, battens and firrings to form continuous linings Forming for access panels, recesses, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Fibrous plaster plain, patterned and other sheets, prepared to receive decorative finishes Fixing fibrous plaster sheets by adhesives, nails, clouts, screws, staples and wadding to studs, joists, noggings, firring, battens, etc., to form continuous linings to walls, partitions, ceilings and soffits, pipe ducts and casings Sheet joints to be butted, with wadding to face or back of sheet, and taping, filled flush Metal internal and external angle reinforcement Tapes and bandages for joint reinforcing Hemp, flax, tow fibre and fibreglass joint reinforcement Plaster for dabs, filling and finishing Cornices, domes, centres, rings, niches, archways, corbels, fire surrounds, columns, pedestals, decorations, etc. Vapour barriers and thermal and acoustic insulation when fixed with the lining Forming for access panels, recesses, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Standard, bracing water-resistant, fire-rated, high density and other gypsum wallboards, prepared to receive decorative finishes Lead core, steel core and specialty substrate wallboards Aluminium foil-surfaced gypsum wallboards Sheet linings as structural bracing when not fixed as part of the framing Metal furring channels and clips Timber battens and gypsum wallboard packing Acoustic fixing clips External angle metal trim and metal control joints Tape-on paper/metal trims and edgings Fixing gypsum wallboards by adhesives, nails, screws or plaster dabs to studs, joists, nogging, metal firring, timber battens, etc., or direct to solid backgrounds, with joints flush stopped to form continuous linings Jointing compounds and joint reinforcing tapes Paper-covered gypsum coving Plaster for dabs, filling and finishing Vapour barriers and thermal and acoustic insulation when fixed with the lining Plaster skim coat Forming access panels including proprietary components, recesses, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Rigid flat sheets, including fixing, as pitched roof sarking, flat roof decking substrate, linings to walls, ceilings and soffits, pipe ducts and casings, and fire casings, ready to receive applied finishes Rigid flat sheets including: - vermiculite boards - boards of composite construction - GRC sheets - calcium silicate boards - barium sulphate boards - boards and sheets of other similar materials Vapour barriers and thermal and acoustic insulation when fixed with the sheeting Linings, etc., to stairwells and openings where not part of a stair or other component Screws, nails, staples, clips, H, J and similar sections, velcro and other mechanical fixings Forming for access panels, recesses, etc. Forming for openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Rigid flat sheets, including fixing, as pitched roof sarking, flat roof decking substrate, linings to walls, ceilings and soffits, pipe ducts and casings, and fire casings, ready to receive applied finishes Rigid flat sheets including: - solid plastics sheets - plastic foam boards - laminated plastics boards - boards of composite construction Metal strapping, timber battens and fire-resisting battens to fire casings Vapour barriers and thermal and acoustic insulation when fixed with the sheeting Linings, etc., to stairwells and openings where not part of a stair or other component Screws, nails, staples, clips, H, J and similar sections, velcro and other mechanical fixings Forming for access panels, recesses, etc. Forming for openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

Woodwool panels, with or without channel edging, fixed to framing Vapour barriers when fixed with the sheeting Forming for openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Plywood, including fixing, as pitched roof sarking, linings to walls, ceilings and soffits, pipe ducts and casings ready to receive applied finishes Plywood, lead-core plywood, OSB, blockboard, etc. Sheet linings as structural bracing when not fixed as part of the framing Metal strapping, timber battens and fire-resisting battens to fire casings Vapour barriers and thermal and acoustic insulation when fixed with the sheeting Screws, nails, staples, clips, H, J and similar sections, velcro and other mechanical fixings Forming access panels, recesses, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Manufactured timber boards, including fixing, as pitched roof sarking, linings to walls, ceilings and soffits, pipe ducts and casings, ready to receive applied finishes Manufactured timber boards including: - plywood and OSB - blockboard - chipboard - laminated boards - cementitious wood fibre board - waferboard - medium density fibreboard - hardboard - cellulose fibre insulating boards - bitumen-impregnated fibreboard - Lead-core plywood Sheet linings as structural bracing when not fixed as part of the framing Metal strapping, timber battens and fire-resisting battens to fire casings Vapour barriers and thermal and acoustic insulation when fixed with the sheeting Linings, etc., to stairwells and openings where not part of a stair or other component Screws, nails, staples, clips, H, J and similar sections, velcro and other mechanical fixings Forming access panels, recesses, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Boarding, unfinished or sealed, fixed as wall, ceiling and interior soffit lining, ready to receive applied finishes Sarking to pitched roofs Vapour barriers and thermal and acoustic insulation when fixed as part of the boarding installation Forming access panels, recesses, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Prefinished solid timber linings fixed to studs, beams, joists, battens, etc., and prepared for exposed natural finishes to form dado, wall, ceiling and soffit linings Timber battens provided as part of the installation of the lining including fixing by adhesive or mechanical means Forming access panels, recesses, expansion gaps, etc. Vapour barriers and thermal and acoustic insulation when fixed as part of the lining installation Sanding, sealing, finishing, etc., when required to be executed with the lining either on or off site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Prefinished plywood board linings fixed to studs, beams, joists, battens, etc., and prepared for exposed natural finishes to form dado, wall, ceiling and soffit linings Timber battens provided as part of the installation of the lining including fixing by adhesive or mechanical means Forming access panels, recesses, expansion gaps, etc. Vapour barriers and thermal and acoustic insulation when fixed as part of the lining installation Sanding, sealing, finishing, etc., when required to be executed with the lining either on or off site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Prefinished manufactured timber board linings fixed to studs, beams, joists, battens, etc., and prepared for exposed natural finishes to form dado, wall, ceiling and soffit linings Timber battens provided as part of the installation of the lining including fixing by adhesive or mechanical means Forming access panels, recesses, expansion gaps, etc. Vapour barriers and thermal and acoustic insulation when fixed as part of the lining installation Sanding, sealing, finishing, etc., when required to be executed with the lining either on or off site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Prefinished fibre cement linings to walls and ceilings with moulds and jointers to all joints, edges and angles Forming openings with associated trim exposed as part of the lining or panelling Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Prefinished fibrous plaster sheets, with mouldings and jointers to all joints, edges and angles Forming openings with associated trim exposed as part of the lining or panelling Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Prefinished plasterboard linings, with mouldings and jointers to all joints, edges and angles Forming openings with associated trim exposed as part of the lining or panelling Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Prefinished unbacked solid plastics sheeting Prefinished linings with facings of plastics laminates with mouldings and jointers to all joints, edges and angles Studding, grounds and unexposed supports when required to be executed with the lining and panelling Packings, tongues, rebates, screws, backscrewing, screwing and pelleting, adhesive jointing and fixing, and all other means of assembling, jointing and fixing Forming openings with associated trim exposed as part of the lining or panelling Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Backed plain, embossed and textured metal linings, with moulding and jointers to all joints, edges and angles Studding, grounds and unexposed supports when required to be executed with the lining and panelling Packings, tongues, rebates, screws, backscrewing, screwing and pelleting, adhesive jointing and fixing, and all other means of assembling, jointing and fixing Forming openings with associated trim exposed as part of the lining or panelling Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Plain, corrugated, embossed and perforated prefinished sheet metal as wall, ceiling and soffit linings, fixed to framing Sheet metal substrates for support, sound absorption etc. On site surface finishing or prefinished Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Trim of timber, metal, plastics, etc., including architraves, skirtings, cornices, picture rails, cover beads, etc., fixed at junctions of materials and surfaces and at edges of openings except where the trim is integrally associated with & installed under other Work sections Protective coatings and decorative finishes applied off site and preparation to receive protective coatings and decorative finishes on site

Rails of timber, metal and plastics, fixed to framing to provide protection to linings against physical damage Shaped casings of plywood, metal and plastics to protect piping, cabling, radiators, etc., fixed to linings Corner guards of light sheet metal, plastics, etc., to corners, columns and projections, except where forming part of the lining Rails fixed to framing to protect the linings and act as handrails Bumpers of timber, rubber, etc., fixed to walls, loading docks and openings Preparing surfaces and applying protective coatings, and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

"Covering of welded or woven metal wire, or chain link metal wire, woven and link wire mesh, fixed to framing, battens, tracks, substrates or fixing points, over linings or to form air-permeable enclosures and screens Metals may be steel, stainless steel, aluminium, copper, bronze, etc or combinations of various metals. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Electrical earthing as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)"

"Covering of usually pre-finished timber battens, timber grids or other simple timber forms, with pre-finished fixing systems that may consist of clips and battens/channels/tracks, that in turn fix to structure, sub-structure, frames or substrates Systems are over linings or form air-permeable enclosures, screens and features, that may be incorporated or isolated elements Although main purpose is decorative, options may include backing materials such as, cloth (or similar) backing and insulation (thermal or acoustic), when supplied as part of the system Components and accessories when supplied as part of the system Fixing all items and associated components to the building fabric including all bolts, cleats, channels, pockets, brackets and other fixings Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)"

"Covering of usually pre-finished metal battens, metal grids or other simple similar metal forms, with pre-finished fixing systems that may consist of clips and battens/channels/tracks, that in turn fix to structure, sub-structure, frames or substrates Systems are over linings or form air-permeable enclosures, screens and features, that may be incorporated or isolated elements Although main purpose is decorative, options may include backing materials such as, cloth (or similar) backing and insulation (thermal or acoustic), when supplied as part of the system Components and accessories when supplied as part of the system Fixing all items and associated components to the building fabric including all bolts, cleats, channels, pockets, brackets and other fixings Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)"

"Covering of battens, grids or other simple similar forms, with fixing systems that may consist of clips and battens/channels/tracks, that in turn fix to structure, sub-structure, frames or substrates Systems are over linings or form air-permeable enclosures, screens and features, that may be incorporated or isolated elements Although main purpose is decorative, options may include backing materials such as, cloth (or similar) backing and insulation (thermal or acoustic), when supplied as part of the system Components and accessories when supplied as part of the system Fixing all items and associated components to the building fabric including all bolts, cleats, channels, pockets, brackets and other fixings Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)"

No content available for this item.

Timber and/or metal framing to support the lining material Casing of plasterboard, fibrous plaster, calcium silicate, mineral wool and other mineral boards, of the required thickness Fixing lining to framing Forming openings and cutting holes as required to suit sub-contractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Perforated rigid sheet surfacing, backed with sound absorbent materials, fixed to walls soffits Sound absorbent surfacing materials, fixed to walls and soffits Sound absorbent boards with or without surface covering, fixed to walls and soffits Sprayed sound-absorbent surfacing materials to walls and soffits Anechoic formed shapes, fixed to walls and soffits Acoustic shaped absorbers and reflectors, to reduce or reinforce sound, including supports

Timber and/or metal framing to support the lining material Casing of plasterboard, fibrous plaster, and other mineral boards, combined with lead, barium or other radiation barrier treatments, and of the required thickness Fixing lining to framing Special jointing requirements Forming openings and cutting holes as required to suit sub-contractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Timber and/or metal framing to support the lining material Casing of high density plasterboard, fibrous plaster, and other mineral boards, with or without reinforcing, and of the required thickness Fixing lining to framing Forming openings and cutting holes as required to suit sub-contractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

Partitions of dry construction, with a framework of steel stud and/or aluminium extrusions, fixed to floors, walls and ceilings, within which are installed horizontal and vertical members, door frames, trim, etc. Modular and/or purpose made prefinished panels of all types Assembling panels without studs, framing, etc., to form partitions, cubicles and cubicle partitions with panels placed or slid into position between floor plates and top rails Connecting, stiffening and fixing devices for frames or panels Skirtings, head mouldings, trim, etc., where an integral part of the partitioning system, and supporting legs and brackets where partitions are clear of the floor Glass sheets fixed into the framing Metal or timber studs/nogs installed within the aluminium framework to support solid sections of the partitioning Plasterboard or other board fixed to studs, stopped and skim coated or otherwise prepared to receive surface finish Panels and sheets fixed to studs Finishes of paint, fabric, vinyl, veneer and other thin sheets, applied on or off site Provision for and of electrical, communication and other building services in partitions, ready for connection to supply services Doors, windows, hatches, glazed lights, openings, shutters, etc., including hardware where an integral part of the partitioning system Curtain tracks and rails where integrally attached to the partitions Additional provisions to the standard partition system to achieve improved acoustic performance and fire rating Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Partitions of dry construction, with a framework of timber and aluminium extrusions, fixed to floors, walls and ceilings, within which are installed horizontal and vertical members, door frames, trim, etc. Modular and/or purpose made prefinished panels of all types Assembling panels without studs, framing, etc., to form partitions, cubicles and cubicle partitions with panels placed or slid into position between floor plates and top rails Connecting, stiffening and fixing devices for frames or panels Skirtings, head mouldings, trim, etc., where an integral part of the partitioning system, and supporting legs and brackets where partitions are clear of the floor Glass sheets fixed into the framing Plasterboard or other board fixed to studs, stopped and skim coated or otherwise prepared to receive surface finish Panels and sheets fixed to studs Finishes of paint, fabric, vinyl, veneer and other thin sheets, applied on or off site Provision for and of electrical, communication and other building services in partitions, ready for connection to supply services Doors, windows, hatches, glazed lights, openings, shutters, etc., including hardware where an integral part of the partitioning system Curtain tracks and rails where integrally attached to the partitions Additional provisions to the standard partition system to achieve improved acoustic performance and fire rating Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Slabs or sheets of stone, terrazzo, precast concrete, GRC, solid plastics, plastics or metal-faced sheets, safety glass and other materials Slabs or sheets fixed directly to each other and to the building fabric Slabs or sheets set into a framework of rails, transoms, posts, etc., taken to and fixed to floors, walls and ceilings, or supported on legs and brackets Doors, windows, hatches, glazed lights, openings, etc., and associated frames where an integral part of the partition system, including hardware Provision for electrical, communication and other building services in partitions, ready for installation and connection to supply services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Solid wood planks, including glue jointed planks, with butt or T&G joints, prefinished or prepared to receive painting, clear finishing or coverings Planks and boards of manufactured timber, prefinished or prepared to receive finishing, including sheet covering Supporting framework to support planks and boards, with posts, rails, transoms, etc. Doors, windows, openings, etc., and associated frames where an integral part of the partition system, including hardware Provision for electrical and communication services in partitions, ready for installation and connection to supply services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Self spanning, solid or composite, proprietary planks, boards or panels installed between structural elements Self spanning, solid or composite, non-proprietary planks, boards or panels installed between structural elements Planks, boards or panels prefinished or prepared to receive finishing, including sheet covering Supporting framework or channels to support planks, boards or panels Doors, windows, openings, etc., and associated frames where an integral part of the partition system, including hardware Provision for services in partitions, ready for installation and connection to supply services Additional provisions to the standard system to achieve improved acoustic performance and fire rating Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Proprietary fire-rated partitions to provide a specified fire rating, installed between two horizontal or sloping fire-rated floors and/or roofs, complete with doors, windows, glazed panels, access panels and openings protected by heat-activated shutters or covers Fire-rated partitions constructed on site, faced with fibre cement, fibrous plaster, plasterboard, etc., to provide a specified fire rating, with framing and linings conforming to approved practice, prepared to receive fire-rated doors, windows, glazed panels, access panels and openings, protected by heatactivated shutters or covers Fire-rated barriers constructed in space above suspended ceilings when not part of the ceiling system Partitions to be self-finished or finished after installation Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Proprietary sound-rated partitions to provide a specified level of sound attenuation, complete with doors, windows, glazed panels and access panels Sound-rated partitions constructed on site of fibre cement, fibrous plaster, plasterboard, etc., with acoustic clip fixings, to provide a specified level of sound attenuation, prepared to receive doors, windows, glazed panels and access panels, designed and constructed to provide the same or better sound attenuation as the partition Sound-rated barriers constructed in space above suspended ceilings when not part of the ceiling system Partitions to be self-finished or finished after installation Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Proprietary partitions to provide a specified insulation value and a total barrier to moisture vapour, either in one direction through the partition or in both directions Partitions constructed on site to provide a barrier to the transmission of heat and moisture vapour Windows, doors and glazed panels to provide the same insulation levels as the partition Partitions to be self-finished or finished after installation Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

No content available for this item.

Suites of windows and frames, doors and frames, fixed lights, hatches, panels, etc., installed internally. Glazing, hardware, ventilation panels, etc., supplied and fixed off site Fixing supplied hardware Frames with provision for doors, sidelights and fanlights Door sets of proprietary door frames and doors, including hinged, sliding, roll-up, horizontally rolling, up and over, sliding/folding, sliding/stacking and revolving doors and enclosing screens with hardware supplied and /or fitted Architraves, trim, etc., when supplied with the suites Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

Proprietary fire-rated screen assemblies incorporating doors, windows, fixed lights, hatches, shutters, panels, etc., with integral hardware Fire-rated door, window and frame assemblies with integral hardware Single leaf hinged fire-rated doors and frames Double leaf hinged fire-rated doors and frames Sliding gravity operated fire-rated doors and frames Sliding counterbalanced fire-rated doors and frames Sliding and roll-up fire-rated shutters and frames Hardware incorporated in the fire-rated doors and frames Installation Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

Single leaf hinged fire-rated doors and frames Double leaf hinged fire-rated doors and frames Sliding gravity operated fire-rated doors and frames Sliding counterbalanced fire-rated doors and frames Sliding and roll-up fire-rated shutters and frames Hardware incorporated in the fire-rated doors and frames Fire-rated window and frame assemblies with integral hardware Fire-rated roof windows and lights Installation Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

"Sound insulated hinged door and frame assemblies, with integral hardware Sound insulated sliding doors and frame assemblies, with integral hardware Sound insulated sliding/stacking door and frame assemblies with integral hardware Sound insulated sliding/folding and pantograph doors and frame assemblies with integral hardware Sound insulated windows of two or more panes, set in single or split frames, for building into prepared openings Hardware, flashings, trim and screens where forming part of the window assembly Installation Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)"

No content available for this item.

"Structure and supports frames Hatches or covers when supplied as part of the system Hatches with opening mechanisms, or covers with fixings that allow complete removal Steps, ladders, platforms and handrails when supplied as part of the system Components and accessories when supplied as part of the system Fixing all items and associated components to the building fabric including all bolts, cleats, channels, pockets, brackets and other fixings Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)"

No content available for this item.

Timber decorative screens, including associated frames Timber screens and associated frames to openings, including louvres, wire mesh screening to air intake and relief openings to exclude animals and debris Timber screens and associated frames and supports, fixed internally to control heat and light, with fixed or adjustable blades Timber shutters to doors and windows, hinged or sliding, fixed internally Timber lightproof fixed louvred screens and frames Securing screens and shutters to the building fabric, with all necessary anchors, fixings, etc. Hardware, operating gear Connecting electrically operated items to a designated point of electrical supply Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Proprietary fire-rated screen assemblies incorporating doors, windows, fixed lights, hatches, shutters, panels, etc., with integral hardware Installation Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

Proprietary suspension and framing members and grid to receive drop in tiles, panels, etc. Self-finished tiles, boards, panels, sheets, strips, open cells, etc., set into the ceiling grid Tiles, boards, panels, sheets, strips, open cells, etc., to receive a decorative finish, set into a ceiling grid Perimeter trim Insulation installed as a part of the ceiling installation Access panels, recesses, etc. Fire, smoke and sound barriers above false ceiling level if installed as part of the ceiling installation Reveals and lining to roof light openings, changes of level, etc., including all supports Preparing the ceiling and grid to receive heating, ventilating, lighting, fire detection and control systems, and for other building services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Suspension and framing members and grid to receive tiles, panels, sheet surfacing, etc. Self-finished tiles, boards, panels, strips, open cells, etc., and plasterboard, fibre cement board, fibrous plaster, manufactured timber boards, etc., to receive a decorative finish, set into or supported from a ceiling grid or fixed direct to ceiling framing Perimeter trim Insulation installed as a part of the ceiling installation Access panels, recesses, etc. Fire, smoke and sound barriers above false ceiling if installed as part of the ceiling installation level Reveals and lining to roof light openings, changes of level, etc., including all supports Preparing the ceiling and grid to receive heating, ventilating, lighting, fire detection and extinguishing systems, and for other building services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Proprietary suspension and framing members and grid to receive sheets, panels, etc. Self-finished sheets, boards, panels, strips, etc., fixed to the ceiling grid Plasterboard, fibre cement board, fibrous plaster, manufactured timber boards, etc., to receive a decorative finish, fixed to the ceiling grid Insulation installed as a part of the ceiling installation Access panels, recesses, etc. Fire, smoke and sound barriers above false ceiling level if installed as part of the ceiling installation Reveals and lining to roof light openings, changes of level, etc., including all supports Preparing the ceiling and grid to receive heating, ventilating, lighting, fire detection and control systems, and for other building services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Proprietary suspension and framing members and grid to receive panels, battens/ baffles, strips, grilles, open cells, etc., set into or attached to the ceiling grid or brackets to structure Perimeter trim Insulation installed as a part of the ceiling installation Access panels, recesses, etc. Fire, smoke and sound barriers above false ceiling level if installed as part of the ceiling installation Reveals and lining to roof light openings, changes of level, etc., including all supports Preparing the ceiling and grid to receive heating, ventilating, lighting, fire detection and control systems, and for other building services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

"Fixings, framing members, channels and grid to receive sheets, boards, panels, battens, strips, open cells, etc., supported from a ceiling grid fixed directly to the building structure or sub-structure Perimeter trim Insulation installed as a part of the ceiling installation Access panels, recesses, etc. Fire, smoke and sound barriers above ceiling if installed as part of the ceiling installation level Reveals and lining to roof light openings, changes of level, etc., including all supports Preparing the ceiling and grid to receive heating, ventilating, lighting, fire detection and extinguishing systems, and for other building services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)"

No content available for this item.

Proprietary or non-proprietary suspended and non-suspended grid ceilings to provide a specified fire rating as a barrier between the occupied space and the space above, complete with insulation and provision for building services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

"Proprietary or non-proprietary suspended and non-suspended grid ceiling systems to provide, a specified sound attenuation between the room and the space above the ceiling and/or to provide reverberation control within the room Provision for building services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)"

"Proprietary or non-proprietary suspended and non-suspended grid ceiling systems incorporating the specified building services such as illumination, ventilation, air conditioning, electric heating, piped services to provide heating and cooling, and to absorb energy from the illumination sources Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)"

No content available for this item.

No content available for this item.

Suspended ceilings of stressed membranes, either opaque or translucent Attachment to fixing points for supporting and tensioning the membrane Non-fixed work (see Explanatory notes)

Suspended ceilings of fabric, sheet plastics and flexible materials secured at edges and with intermediate supports Supporting side members where supplied as an integral part of the ceiling installation

No content available for this item.

No content available for this item.

No content available for this item.

Adjustable pedestals or pad supports Floor panels with or without a floor finish Frame to panels (if any) Sheet steel box duct sections with covers Special panels for ventilation, air conditioning and other services Service outlet boxes Removable access panels Skirtings, edge trim, etc., executed as part of the access floor system Fire, smoke and sound barriers Bracing Ramps and accessways from lower adjacent floor levels Adhesives, bearing pads, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Battens and other supports for flooring panels Removable floor panels, fixed to supports, with or without a floor finish Special panels for ventilation and other services Fire, smoke and sound barriers Bracing Ramps and accessways from lower adjacent floor levels Service outlet boxes Removable access panels Adhesives, bearing pads, etc. Forming openings and cutting holes for all penetrations, including building services, in locations established by others Skirtings, edge trim, etc., executed as part of the access floor system Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

Surface-mounted floor ducting for electrical and communications, services, fixed to the substrate, with provision for entry and exit of services and for outlet points Non-fixed work (see Explanatory notes)

Recessed ducting, in walls and ceilings, for building services, with provision for entry and exit of service lines and for outlet points, and with flush cover plates Surface-mounted ducting, for building services, fixed to the substrate, with provision for entry and exit of services and for outlet points Non-fixed work (see Explanatory notes)

Sound insulating packers and supports, fixed to framing Thermal insulation and/or vapour barriers fixed at the same time as the flooring Particleboard, with butt, fillet, adhesive or shaped joints, fixed to framing Sanding, sealing and otherwise preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Sounds insulating packers and supports, fixed to framing Thermal insulation and/or vapour barriers fixed at the same time as the flooring Timber strip flooring, with edges tongued and grooved or butt jointed, fixed to floor framing, either face nailed or secret nailed Proprietary or non-proprietary supporting clips, fixed to timber or concrete subfloor Sanding, sealing and otherwise preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Sound insulating packers and supports, fixed to framing Thermal insulation and/or vapour barriers fixed at the same time as the flooring Plywood flooring, fixed to framing Sanding, sealing and otherwise preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Sound insulating packers and supports, fixed to framing Thermal insulation and/or vapour barriers fixed at the same time as the flooring Edge-glued solid timber boarding, fixed to framing Sanding, sealing and otherwise preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Sound insulating packers and supports, fixed to framing Thermal insulation and/or vapour barriers fixed at the same time as the flooring Flooring, fixed to framing Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

No content available for this item.

Fixtures, including: - counters - desks - benches - worktops - wardrobes - dressers - cupboards, including for kitchen and bathroom - cabinets, including for kitchen and bathroom - vanity units - tables - storage fittings - shelves, fixed and adjustable - mobile shelving, manually or electrically operated - lockers - beds and divans, including foldaway beds - white boards - chalk boards - marker boards - tack boards - magnetic display boards - operable display board - bulletin boards - telephone hoods - ironing units - merchandise display units - baby changing units Hardware supplied with the fixtures Fixings and supports Preparing fixtures for service outlets Preparing surfaces and applying decorative finishes off site Preparing surfaces to receive decorative finishes on site Non-fixed work (see Explanatory notes)

Fixtures, including: - counters - desks - benches - worktops - wardrobes - dressers - cupboards, including for kitchen and bathroom - cabinets, including for kitchen and bathroom - cupboards - cabinets - vanity units - tables - storage fittings - shelves, fixed and adjustable - mobile shelving, manually or electrically operated - lockers - beds and divans, including foldaway beds - white boards - chalk boards - marker boards - tack boards - magnetic display boards - operable display board - bulletin boards - telephone hoods - ironing units - merchandise display units - baby changing units Hardware supplied with the fixtures Fixings and supports Preparing fixtures for service outlets Preparing surfaces and applying decorative finishes off site Preparing surfaces to receive decorative finishes on site Non-fixed work (see Explanatory notes)

Complete room units of proprietary or non-proprietary design and construction forming bathrooms, showers, kitchens and similar rooms, prepared to receive all services. All with baths, showers, cupboards, tops, sinks, basins, etc., cast or fixed integrally into the units, walls, floors and ceilings fully finished and all tapware and fixtures fitted ready for connection Shower units, complete with bases, walls and doors Bath units, complete with bath, walls and doors Kitchens complete with benches, tops, over- and under- cupboards Installing in position and connecting up to services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Theatre and cinema seating Lecture room seating with continuous writing desk Tablets arm seats Pews Stadium seats set on continuous steps Retractable tiered stadium seating

No content available for this item.

No content available for this item.

Clothes lines and hoists of all types Key cabinets Letter boxes Coat racks and umbrella stands Ashtrays Children’s play equipment

Door stops, retaining devices, draughtproofing strips etc. Door furniture, including push plates, pull handles, kick plates, etc. Butts, hinges, pivots and other opening and closing devices Spring butts, door springs, door closers and other self-closing devices Panic bolts, espagnolette bolts, security bolts and other securing devices Locks and latches

Waterbars not built in Proprietary safes Drawers and slides Safety anchors

Vertically operated blinds, sliding and rolling Vertical Venetian-type blinds Horizontal Venetian-type blinds Black-out and brown-out blinds Brackets and fixings Pelmets and valances when included in the blind installation Manual or power operation Connecting power-operated blinds to a designated point of electrical supply Non-fixed work (see Explanatory notes)

Curtains to windows and openings Cubicle curtains Ceiling hung curtains Shower curtains Strip clear plastics curtains to refrigerated cabinets Flame-retardant coatings to curtains Tracks for curtains Ceiling tracks for movable equipment Brackets and fixings Pelmets when included in curtain installations Manual or power operation Connecting power-operated curtains to a designated point of electrical supply Non-fixed work (see Explanatory notes)

Curtains and blinds to windows, openings and other locations, Cubicle curtains, Ceiling hung curtains and blinds, Shower curtains, Strip clear plastics curtains to refrigerated cabinets, Flame-retardant coatings to curtains and blinds, Tracks for curtains, Equipment for blinds, Ceiling tracks for movable equipment, Brackets and fixings, Pelmets when included in curtain and blind installations, Manual or power operation, Connecting power-operated curtains and blinds to a designated point of electrical supply, Nonfixed work (see Explanatory notes)

"Metal framed fabric or plastics covered retractable awnings, fixed externally to the building fabric, over decks, window and door openings, manual or power operated Connecting power-operated awnings to a designated point of electrical supply Non-fixed work (see Explanatory notes)"

Fixed awnings, hoods and canopies, with metal, timber and plastics framing, covered with roofing materials, fabrics and opaque or translucent plastics

"Metal framed fabric or plastics covered retractable awnings, fixed externally over patios, decks, pergolas, window and door openings, manual or power operated Louvred awnings, manual or power operated Umbrella-type awnings Structural elements when supplied as part of the system Components and accessories when supplied as part of the system Fixing all items and associated components to the building fabric including all bolts, cleats, channels, pockets, brackets and other fixings Connecting power-operated awnings to a designated point of electrical supply Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)"

Fabricated metal or composite stairs, tread and riser units, including supporting strings and framing for flights and landings, either with solid steel or grille treads and landings, or prepared to receive precast concrete or timber or laminated timber treads and landings Prefabricated metal or composite stairs, including curved and helical stairs, with tread units, strings and vertical supports Fabricated metal or composite stairs, principally of sheet steel, with pans for horizontal surfaces, prepared to receive cementitious or other flooring material Metal or composite ladders, fixed to the building structure, with strings extended as handrails as required Safety hoops, etc., secured to ladders Proprietary or non-proprietary loft ladders including associated hatch doors Handrails of all materials Fixing all items and associated components to the building fabric including all bolts, cleats and other fixings Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Handrails of all materials Metal or composite stair balustrading, with rails, posts, uprights, newels, etc., of metal or composite materials with balusters, balustrading or prepared to receive balustrading infill of other materials Metal or composite barriers and balustrading, with rails, bars, pipes, mesh screening, etc., of metal or composite material or prepared to receive infill screening of other materials Infilling of glass, plastics, metal or composite material and other sheet or fabricated material to balustrades and barriers when supplied as part of the balustrading and barriers Fixing all items and associated components to the building fabric including all bolts, cleats and other fixings Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

Composite metal items Composite metal screens and shutters Composite metal sheet fabricated items Composite metal miscellaneous items

Timber stairs with strings, risers, treads, newels, landings, etc., prefabricated or constructed on site Timber helical and curved stairs Timber ladders with treads, rungs and strings, with the strings extended as handrails as required, fitted with safety hoops Proprietary or non proprietary loft ladders, including associated hatch doors Timber treads, including laminated timber treads, attached to concrete and metal stair strings and supports Landing framing Handrails of all materials Fixing all items and associated components, including bolts, brackets, cleats, etc., and securing the whole assembly to the building fabric Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Timber covers and frames to floor pits and trenches Timber hatches and frames to floor and roof openings, with opening gear Building in or securing frames to the building fabric with all necessary anchors, fixings etc. Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

Decorative timber fireplaces and mantelpieces Decorative finials, brackets and fretwork strips Decorative columns, pilasters, pediments, etc. Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Timber or non-timber handrails Timber stair balustrading, with rails, posts, uprights, newels, etc., with timber balusters, timber balustrading or prepared to receive balustrading infill of other materials Timber barriers and balustrading, with rails, posts, uprights, screening, etc., with timber balusters, timber balustrading or prepared to receive infill screening of other materials Infilling of glass, plastics, non-ferrous metal and other sheet or fabricated material to balustrades and barriers when supplied as part of the balustrading and barriers Fixing all items and associated components to the building fabric including all bolts, cleats, brackets and other fixings Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

Proprietary acoustically-insulated enclosures Proprietary anechoic enclosures Proprietary bathrooms Proprietary cold rooms Proprietary electromagnetically screened enclosures Proprietary temperature controlled enclosures Proprietary ventilated temperature controlled enclosures Proprietary deep-freeze rooms Proprietary spray booths Proprietary welding booths Proprietary fire-resistant vaults Proprietary security vaults Proprietary storage vaults Proprietary flammable goods storage systems

Loose equipment including: - refrigerators and deep freeze units - refrigerated display cabinets - microwave ovens - hot plates, cooking equipment - dryers and drying cabinets - electric heaters, radiators - fans, air conditioners, dehumidifiers - television sets, DVDs - lamps - office equipment - vending machines - gaming machines - copy boards - heated cupboards - gas hot plates and cooking equipment - gas heater and dryers

Furniture and fittings of all types and materials, including: - tables - chairs and seats - beds and wardrobes - storage shelves, cupboards and lockers - mats, carpets and loose floor coverings - exhibition and display equipment - decorations

Workstations, including: - desk - screens - shelves - storage units, cupboards and credenzas - filing units - other accessories - wire management for wired services

Door and floor numbering and lettering as discrete signs Nameplates, plaques, identification symbols, etc., of all kinds and materials Directional signs, signboards, noticeboards, etc., of all kinds and materials Shop front lettering, emblems, symbols, etc., of all kinds and materials Supports when supplied with the signs

Signwriting on all surfaces, using all materials including gold leaf, both internal and external 582 Artwork and features 5821 Murals, graphic artworks and applied decoration Murals and applied decoration Murals, paintings and drawings produced off site and fixed to the building fabric Frescoes and murals applied to the building fabric Supergraphics Photomurals, printed material 5822 Sculptural artworks Three-dimensional artworks fixed to the building fabric Free standing sculpture, fixed to the building fabric Metal, timber and ceramic constructions fixed to the building fabric Sculptural bas reliefs fixed to or part of the building fabric Plastics domes, etc. (39-11) 589 Ancillary items; repairing and altering signs and features 5891 Ancillary items 5897 Cleaning, repairing and renovating existing signs and features Cleaning, repairing and renovating existing signs and features 5898 Alteration

Murals, paintings and drawings produced off site and fixed to the building fabric Frescoes and murals applied to the building fabric Supergraphics Photomurals, printed material

Free standing sculpture, fixed to the building fabric Metal, timber and ceramic constructions fixed to the building fabric Sculptural bas reliefs fixed to or part of the building fabric Plastics domes, etc. (39-11)

No content available for this item.

No content available for this item.

No content available for this item.