CBI - Reference

Temporary or permanent formwork to foundations, bases, pile caps, beds, slabs, waffle and troughed slabs, beams, casings, strings, steps and staircases, walls, projections, cornices, pilasters, columns, mortices, boxings, etc. Filler blocks and units of concrete, timber, plastics, terra-cotta, etc., placed in formwork Slip formwork Formed plastics formwork to wallings Forming ducts and anchorages for post-tensioned concrete Fair face surfaces Features fixed into formwork to produce special finishes Linings, tubes, pipes, etc., left in place as special finishes Linings, including expanded steel mesh, left in to form key for finishes Collapsible board permanent formwork for use in clay-heave conditions, including sand bed and plastic sheeting Fillets and features fixed to formwork to form grooves, chases, holes, etc. Ties and all supports to formwork Retarding agents, mould oils, release agents and other coatings Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Supplying steel, galvanized steel, steel with protective coating, stainless steel, glass, plastics, etc., bar and fabric reinforcement, expanded metal, wire and fabric wrapping, cut, bent and fabricated for fixing in position Fixing bar, mesh and fabric reinforcement of all types in position, including tying wire, distance blocks, spacers, chairs, etc., and welding and/or mechanical jointing of reinforcement

No content available for this item.

Underlays of quilts and blankets laid on concrete or other structural substrate Vibration-isolating supports placed on concrete or other structural substrate Elastomeric base isolators, installed between footings and structural frame Pneumatic isolators

Concrete of all types including additives and fibre reinforcing Pile caps Footings supported on piles and/or substructure and on the ground and/or on integral short bore and screwed piles supporting ground beams and slabs Columns, beams, slabs, walls, domes, shells, staircases, retaining walls, etc., which form the concrete frame and structure including items to be post-tensioned Slabs, including floating and wearing slabs Slabs in which water piping and electric heating cabling is enveloped Bases for tanks, machinery, etc., and other fully-supported items of in situ concrete Naturbetong Mass concrete on grade as a base for tanking Mass concrete as a working base Accessories cast into the concrete, including bolts and other fixings, boxes, recesses, keyed slots, grooves, welding plates and other items Construction joints including water stops Movement and control joints Joint fillers Metal and plastics cast into edges of construction and movement joints Self-aligning flexible expansion joint covers Off-form finishes to specification or New Zealand Standard Compacting, curing and protection to in situ concrete Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Concrete of all types, including additives and fibre-reinforcing Spray or gun application Accessories cast into the concrete Movement and construction joints including supplying and building in all associated accessories Curing and protecting concrete Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Modifying the surface of set in situ concrete by hammering, hacking, grinding, cutting, abrasive blasting, chemical treatment, etc., to produce a textured surface finish Non-fixed work (see Explanatory notes)

Finishes to concrete formed by means other than formwork, formwork linings or insets, or retarding agents, etc. Aggregate transfer Vacuum dewatering Addition to the concrete surface of granolithic mixtures, metallic hardeners, non-slip compounds, etc. Floating, trowelling, scoring, brooming, tooling Pattern imprinting Surface washing, etc. Applying surface hardeners Curing Non-fixed work (see Explanatory notes)

Cementitious grout Resin grout

No content available for this item.

Concrete of all types for the construction of precast concrete structural items, with required additives, fibres etc. Precast and prestressed precast concrete items to form columns, beams, stairs, trusses, frames, composite units, etc., with all integral connections Precast concrete items, prepared for post-tensioning Precast and precast prestressed concrete to form slabs, beam shells, etc., to act as permanent formwork Aerated autoclaved concrete (AAC) items, including floor and wall slabs Precast concrete helical stairs and structural stair flights Formwork, including fair face formwork Reinforcement of all types, including prestressing reinforcement Insulation incorporated into precast items Accessories and fixings, including accessories supplied and placed as part of the work of other Work sections, cast into the items Surface finishes Compacting, curing and protecting poured concrete Forming openings in the units in positions located by other Work sections, including building in sleeves Delivery of units to the site Non-fixed work (see Explanatory notes)

Concrete of all types, including aggregate for reconstructed stone items, for the construction of precast concrete non-structural items, with required additives, fibres, etc. Cladding panels Factory applied surface finishes: coatings, stone, brick, ceramic tile etc Slab panels for partitions Purpose-made wall linings, slabs, tiles, etc. Stair treads, supported on strings and landings or cantilevered from supports, including non-slip, textured, exposed aggregate, terrazzo, etc. surface finishes Purpose-made lintels, and voussoirs, quoins, sills, corbels, hearths, copings, etc. Engraved or modelled plaques and panel Decorative columns, copings, balustrading and similar items Formwork, including fair face formwork Reinforcement of all types Accessories and fixings including accessories supplied and placed as part of the work of other Work sections, cast in Surface finished Compacting, curing and protecting poured concrete Forming openings in the units in positions located by other Work sections, including building in sleeves Delivery of units to the site Non-fixed work (see Explanatory notes)

GRC panels, constructed of a cement/sand matrix with polymer and other additives, reinforced with glass fibre, forming external cladding panels and internal linings GRC sandwich panels incorporating insulating materials Decorative features formed of GRC Integral surface finishes to GRC Factory applied surface coatings Formwork Accessories and fixings cast in Curing and protection Forming openings in GRC units, located by other Work sections, including building in sleeves Delivery of the units to the site Non-fixed work (see Explanatory notes)

No content available for this item.

Installation of precast and prestressed precast items to form part of the structural frame of the building Installation of precast concrete permanent formwork which forms part of the structure Installation of AAC structural items, including floor and wall slabs Installation of helical stairs, stair flights, etc.

Installation of precast concrete cladding panels Installation of precast concrete and reconstructed stone stair treads and other purpose-made and decorative items

No content available for this item.

No content available for this item.

No content available for this item.

Profiled metal sheeting permanent formwork, with connectors and studs and fixing to supporting structure, acting as a tension component of the in situ concrete Permanent proprietary formwork (not precast concrete) In situ concrete placed on profiled metal sheeting or proprietary formwork Compacting, curing, and protecting in situ concrete Accessories and fixings cast into the concrete Movement and construction joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Installation of precast concrete members of all types including prestressed members, with reinforcing and other connections for incorporation into in situ concrete, including slabs, beams, beam shells, ribs and filler units of concrete, timber, plastics, terra-cotta, etc., acting as permanent formwork In situ concrete, placed to form part of the concrete frame and to integrate the precast members into the concrete frame Compacting, curing and protecting in situ concrete Accessories and fixings cast into the concrete Movement and construction joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Structural steel, stainless steel, precast concrete or in situ concrete or a combination of these construction methods to form a structural frame Precast concrete walls, poured on site Precast concrete slabs, poured on site Insulation incorporated into the concrete items Installation of proprietary precast concrete units, constructed off site, to form walls and floors, stairs and other items, within the tilt-up or lift slab structure Slab jacking and wall-tilting Steel brackets, ties and anchors Compacting, curing and protecting in situ concrete Accessories and fixings cast into the concrete Movement and construction joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Installation of precast concrete units, cast with anchorage pockets Reinforcement, including anchors and accessories Post-tensioning the construction Grouting up ducts, trimming of exposed reinforcement, etc. In situ concrete as required to complete the work Compacting, curing and protecting in situ concrete Accessories and fixings cast into the concrete Movement and construction joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

Light weight concrete of all types including additives and fibre reinforcing Slabs, walls, domes, shells etc., which form part of the concrete structure Slabs, including floating slabs Slabs in which water piping and electric heating cabling is enveloped Minor items forming part of the building frame Mass concrete filling, blinding and make-up to excess foundation excavations Mass concrete on grade as a base for tanking Mass concrete as a working base Accessories cast into the concrete, including bolts and other fixings, boxes, recesses, keyed slots, grooves, welding plates and other items Construction joints Movement and control joints Joint fillers Metal and plastics cast into edges of construction and movement joints Off-form finishes to specification Compacting, curing and protection to light weight in situ concrete Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Installation of light weight precast items to form part of the structure of the building Installation of light weight precast concrete permanent formwork which forms part of the structure Installation of AAC structural items, including floor and wall slabs Installation of non structural light weight precast concrete cladding panels Installation of light weight precast concrete as non-structural purpose-made and decorative items

Installation of light weight precast concrete members of all types, with reinforcing and other connections for incorporation into in situ concrete, including slabs, beams, beam shells, ribs and filler units acting as permanent formwork In situ concrete, placed to form part of the concrete frame and to integrate the light weight precast members into the concrete frame Compacting, curing and protecting in situ concrete Accessories and fixings cast into the concrete Movement and construction joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

Temporary and permanent formwork to poured earth construction, with all ties and supports Formblock formwork Fillets and features to form grooves, chases, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Reinforcement of all types and materials Placing and securing reinforcement in position Non-fixed work (see Explanatory notes)

Underlays and damp-proof courses of sheet plastics Underlays and damp-proof courses of stone and fired clay Forming openings in the underlays and damp-proof courses for services to suit subcontractor and General Contractor responsibility

Earth mixes of all types, poured into place Compacting, curing and protecting Movement joints and keyways, grooves and chases Accessories cast into the poured earth Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Finishing horizontal surfaces to smooth finish Working off-form surfaces to provide textured surfaces

Temporary and permanent formwork to rammed earth construction, with all ties and supports Fillets and features to form grooves, chases, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Reinforcement of all types and materials Placing and securing reinforcement in position Non-fixed work (see Explanatory notes)

Underlays and damp-proof courses of sheet plastics Underlays and damp-proof courses of stone and fired clay Forming openings in the underlays and damp-proof courses for services to suit subcontractor and General Contractor responsibility

Earth mixes of all types, rammed into place Compacting, curing and protecting Movement joints and keyways, grooves and chases Accessories cast into or fixed to the rammed earth Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Finishing horizontal surfaces to smooth finish Working off-form surfaces to provide textured surfaces

No content available for this item.

No content available for this item.

Brickwork of clay bricks, concrete bricks and calcium silicate bricks of all types Special shape bricks, including grooved bricks for services Specially faced bricks Walls laid in bonds and with surface patterns Chimney stacks, flues and flue linings Purpose-made centring and formwork Cementitious filling to cavities Mortar, pointing materials Bagging Accessories, thresholds, sills, lintels, etc., built into the brickwork Reinforcing steel Reinforcement Wall ties, anchors, cramps, dowels, restraining members Flexible dpc’s, slate dpc’s, termite shields Metal dpc’s built in and extended out as flashing over sloping surfaces Cavity trays formed from flexible sheet dpc material Preformed cavity trays Cavity wall ventilators, fire barriers, weepholes Cavity bridging ducts Flue terminals Members to provide seismic restraint to panels Movement joints and fillers Forming and cutting brickwork Cleaning down Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Hollow concrete blocks of all types Hollow concrete blocks incorporating a layer of insulation Special shape blocks Specially faced blocks Blocks with knock-out and cut-out sections Chimney stacks and flues Lintels Purpose-made centring and formwork Reinforcement Mortar Cementitious filling and grouting of cores and beam blocks Accessories, thresholds, sills, lintels, etc., built into the blockwork Anchors, cramps, dowels, restraining members Dpc’s, termite shields Metal dpc’s built in and extended out as flashing over sloping surfaces Cavity trays formed from flexible sheet dpc material Movement joints and fillers Forming and cutting blockwork Cleaning down Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Hollow plastic blocks of all types Blocks of special shapes Reinforcement Cementitious filling and grouting of interstices Formwork to openings, including purpose-made formwork Movement joints and fillers Dpc’s, termite shields Accessories, thresholds, sills, etc., built into the blockwork Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Solid concrete blocks of all types Aerated autoclaved concrete solid blocks of all types (AAC) Special shape blocks Specially faced blocks Chimney stacks and flues Purpose-made centring and formwork Reinforcement Mortar Accessories, thresholds, sills, etc., built into the blockwork Anchors, cramps, dowels Dpc’s, termite shields Cavity trays formed from flexible sheet dpc material Movement joints and fillers Members to provide seismic restraint to panels, fixed to structural frame Forming and cutting blockwork Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

Clay blocks of all types Special shape blocks, including grooved blocks Specially faced blocks Purpose-made centring and formwork Mortar Accessories built into the blockwork Dpc’s, termite shields Movement joints and fillers Members to provide seismic restraint to panels, fixed to structural frame Forming and cutting blockwork Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Mineral blocks of all types Special shape blocks Purpose-made centring and formwork Accessories built into or fixed to the blockwork Proprietary and non-proprietary lintels, sills, etc. Movement joints and fillers Members to provide seismic restraint to panels, fixed to structural frame Forming and cutting blockwork Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Unfired earth blocks and bricks of all types Special shape blocks and bricks Purpose-made centring and formwork Accessories built into or fixed to the earth masonry Dpc’s, termite shields Movement joints and fillers Forming and cutting earth masonry Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

Cutting out decayed, defective and cracked masonry Inserting new masonry Repairing reconstructed and plastic masonry Re-dressing masonry to new profiles Removing efflorescence Removing dirt and graffiti Treating rising damp by chemical methods Inserting new damp-proof courses Inserting new wall ties Repointing Artificial weathering

No content available for this item.

Fabricating and erecting structural steel using rolled, hollow, folded and pipe sections, plate, wires, cables, - rods and bars, to form: - fabricated beams and members - trusses - space frames - domes - structural framework Concrete-filled members Water-filled constructions Openable and sliding roof framework Structure to support glazed vaulting, arcading and roof lights Holding down assemblies with templates Bedding into concrete footings Fabrication and erection including cutting, welding, drilling, riveting, bolting, both off site and on site Proprietary fixing bolts and systems, including all drilling required in concrete and masonry, together with cement or resin grouting Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Industrial patent glazing bars Isolated steel members providing support in light timber and light metal framing and in timber structural framing Structural grid at suspended ceiling level to support equipment mounted overhead or at suspended ceiling level Individual supporting units fixed to the structural slab or beams, to support items of equipment mounted at, above or below suspended ceiling level Tank and equipment stands Lift and runway beams Steel purlins and girts Steel straps as structural supports Eye bolts and hangers

Cold rolled steel sections Hollow steel sections Steel plate Steel wires Aluminium extruded, drawn and folded sections Timber minor components Insulation components/separators Fabrication and erection including cutting, welding, clipping, drilling, riveting, bolting, both on site and off site Holding down bolts and fixing devices, including drilling in concrete and masonry Sheet bracing fixed as part of the framing Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Steel piping, with joints welded and/or clamped, secured to the building structure or fabric to form partitions, wall framing, etc. Holding down bolts and fixing devices, including drilling in concrete and masonry Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

Flooring of sheet steel, chequer plate, perforated and textured sheet, fabricated grille units, etc. Supporting steel structure where an integral part of the flooring Walkways and catwalks of solid sheet steel, grille flooring, etc., on top of roofs, decks, etc. Fixing all items and associated components to the building fabric including all bolts, cleats and other fixings Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

Fabricating and erecting structural stainless steel using rolled, hollow, folded and pipe sections, plates, wires, - cables, rods and bars, to form: - fabricated beams and members - trusses - space frames - domes - structural framework Concrete-filled members Water-filled constructions Openable and sliding roof framework Structure to support glazed vaulting, arcading and roof lights Holding down assemblies with templates Bedding into concrete footings Fabrication and erection including cutting, welding, drilling, riveting, bolting, both off site and on site Proprietary fixing bolts and systems, including all drilling required in concrete and masonry, together with cement or resin grouting Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Industrial patent glazing bars Isolated members providing support in light timber and light metal framing and in timber structural framing Stainless steel purlins and girts Stainless steel straps as structural supports Eye bolts and hangers

No content available for this item.

No content available for this item.

Flooring of sheet stainless steel, chequer plate, perforated and textured sheet, fabricated grille units, etc. Associated supporting stainless steel structure where an integral part of the flooring Walkways and catwalks of solid sheet stainless steel, grille flooring, etc., on top of roofs, decks, etc. Fixing all items and associated components to the building fabric including all bolts, cleats and other fixings Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

No content available for this item.

Fabricating and erecting structural aluminium using extruded, rolled, hollow, folded and pipe sections, plate, - wires, cables, rods and bars, to form: - fabricated beams and members - trusses - space frames - domes - structural framework Concrete-filled members Openable and sliding roof framework Structure to support glazed vaulting, arcading and roof lights Holding down assemblies with templates Bedding into concrete footings Fabrication and erection including cutting, welding, drilling, riveting, bolting, both off site and on site Proprietary fixing bolts and systems, including all drilling required in concrete and masonry, together with cement or resin grouting Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Industrial patent glazing bars and associated supports Isolated members providing support in light timber and light metal framing and in timber structural framing Eye bolts and hangers Aluminium pipe framing Aluminium purlins and girts Aluminium straps as structural supports

No content available for this item.

No content available for this item.

"Flooring of extruded aluminium panels, sheet aluminium, chequer plate, perforated and textured sheet, fabricated grille units, etc. Associated supporting aluminium structure, where an integral part of the flooring Walkways and catwalks of solid aluminium, grille flooring etc., on top of roofs, decks, etc. Fixing all items and associated components to the building fabric including all bolts, cleats, and other fixings Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)"

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

Flooring of extruded aluminium panels, sheet aluminium, chequer plate, perforated and textured sheet, fabricated grille units, etc. Associated supporting aluminium structure, where an integral part of the flooring Walkways and catwalks of solid aluminium, grille flooring etc., on top of roofs, decks, etc. Fixing all items and associated components to the building fabric including all bolts, cleats, and other fixings Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

"Beams of fibreglass reinforced plastics, kevlar composites etc fixed to the building frame Plastics self-supporting domes, including geodesic domes, cupolas, roof structures and finials, self-finished or to receive later finish, fixed to the building fabric Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)"

"Plastics decorative columns, pilasters, pediments, etc., fixed to and supported by the building fabric, to receive plaster finish or self-finished Plastics decorative wall and ceiling panels, fixed to and supported by the building fabric Plastics decorative mouldings and trim fixed to the building fabric Plastics shutters to doors and windows Plastics wall vents Plastics handrails and grab rails Plastics extruded mouldings to metal handrails Plastics safety floor gratings and walkway matting Plastics boxes and covers for valves, etc. Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)"

No content available for this item.

No content available for this item.

No content available for this item.

Timber structural members, including beams, portals, and trusses, fabricated to individual requirements Connectors, including plywood and steel gusset plates, multi-nail plates, used in the fabrication of the units Exposed surfaces finished as required Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Delivery to the site Non-fixed work (see Explanatory notes)

Trimming tops of piles and poles Constructing a timber platform with bearers, beams, joists, bracing, etc. Preparation of platform to receive superstructure All connectors and fixings including bolts, ties, shoes, metal hangers, etc. Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Wood based structural members, including straight, tapered and curved beams, arches, portals, and trusses, fabricated to individual requirements Connectors, including plywood and steel gusset plates, multi-nail plates, used in the fabrication of the units Exposed surfaces finished as required Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Delivery to the site Non-fixed work (see Explanatory notes)

Industrial glazing bars Isolated timber members, trusses, prefabricated items, etc., providing support Tank and equipment stands Timber purlins and girts

Walling of logs or shaped timber members with overlapped joints at wall intersections Walling of logs or shaped timber members as infilling between framing Timber and/or steel framing prepared to receive infill walling of logs or shaped timber members Bracing and accessories Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Solid timber or fabricated U and H-shaped studs, lintels and plates Fabricated beams, joists, rafters and lintels Timber columns, bearers, joists, beams, Standard and special timber trusses, prefabricated frames and beams Space frames and domes Timber structure to support glazed vaulting, arcading and roof lights Timber bearers, joists, nogging, bracing, lintels, sheet bracing, etc. Timber purlins, rafters, struts, gutterboards, box gutter supports, fascias, fillets, kerbs, etc., to roofs Timber frames, to concrete, steel and timber structures Fabricated timber members, fabricated composite timber/steel members Sheet bracing of manufactured timber board, plasterboard, fibre cement, etc., fixed as part of the framing Metal and composite timber/steel lintels, bracing, etc. Ties, connectors, straps, hangers, shoes, bolts and other fixings; termite shields Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Structural timber framing Walling of shaped and dressed solid timber members fitted between framing Ties, braces and accessories Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Supply, installation and fixing of bracing elements of: Timber based sheet material Sheet metal based material Composite sheet material

No content available for this item.

Solid timber or fabricated U and H-shaped studs, lintels and plates, loadbearing and non-loadbearing Fabricated beams, joists and lintels Timber columns, bearers, joists, beams, Standard and special timber prefabricated frames and beams Timber joists, nogging, bracing, lintels, sheet bracing, etc. Timber frames, to concrete, steel and timber structures Fabricated timber members, fabricated composite timber/steel members Sheet bracing of manufactured timber board, plasterboard, fibre cement, etc., fixed as part of the framing Metal and composite timber/steel lintels, bracing, etc. Ties, connectors, straps, hangers, shoes, bolts and other fixings Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Timber fixed to bearers, forming catwalks, walkways etc. Treads of solid timber, laminated timber, manufactured timber boarding, fixed to stair strings and landing framing as treads and landings Sanding, sealing and otherwise preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

No content available for this item.

Beams of fibreglass reinforced plastics, kevlar composites etc fixed to the building frame Plastics self-supporting domes, including geodesic domes, cupolas, roof structures and finials, self-finished or to receive later finish, fixed to the building fabric Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

Plastics decorative columns, pilasters, pediments, etc., fixed to and supported by the building fabric, to receive plaster finish or self-finished Plastics decorative wall and ceiling panels, fixed to and supported by the building fabric Plastics decorative mouldings and trim fixed to the building fabric Plastics shutters to doors and windows Plastics wall vents Plastics handrails and grab rails Plastics extruded mouldings to metal handrails Plastics safety floor gratings and walkway matting Plastics boxes and covers for valves, etc. Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

No content available for this item.