Masterspec

CBI - Reference

51 Wall and ceiling linings 51 Wall and ceiling linings
511 Sheet linings 511 Sheet linings
5111 Fibre cement linings 5111 Fibre cement linings
Fibre cement sheets, fixed to the supporting framing to form continuous linings ready to receive applied finishes

Standard, compressed, metal-core, water-resistant and other sheets, to form a substrate to receive decorative finishes Sheet linings as structural bracing when not fixed as part of the framing Timber battens and metal firring channels Angle reinforcement Control joint sections Jointing compounds and joint reinforcing tapes Vapour barriers and thermal and acoustic insulation when fixed with the lining Fixing fibre cement sheet with fasteners, screws and nails, to studs, joists, nogging, battens and firrings to form continuous linings Forming for access panels, recesses, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5112 Fibrous plaster linings 5112 Fibrous plaster linings
Fibrous plaster sheets, fixed to the supporting framing to form continuous linings ready to receive applied finishes

Fibrous plaster plain, patterned and other sheets, prepared to receive decorative finishes Fixing fibrous plaster sheets by adhesives, nails, clouts, screws, staples and wadding to studs, joists, noggings, firring, battens, etc., to form continuous linings to walls, partitions, ceilings and soffits, pipe ducts and casings Sheet joints to be butted, with wadding to face or back of sheet, and taping, filled flush Metal internal and external angle reinforcement Tapes and bandages for joint reinforcing Hemp, flax, tow fibre and fibreglass joint reinforcement Plaster for dabs, filling and finishing Cornices, domes, centres, rings, niches, archways, corbels, fire surrounds, columns, pedestals, decorations, etc. Vapour barriers and thermal and acoustic insulation when fixed with the lining Forming for access panels, recesses, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5113 Plasterboard linings 5113 Plasterboard linings
Paper faced gypsum wallboard, fixed to the supporting framing to form continuous linings ready to receive applied finishes

Standard, bracing water-resistant, fire-rated, high density and other gypsum wallboards, prepared to receive decorative finishes Lead core, steel core and specialty substrate wallboards Aluminium foil-surfaced gypsum wallboards Sheet linings as structural bracing when not fixed as part of the framing Metal furring channels and clips Timber battens and gypsum wallboard packing Acoustic fixing clips External angle metal trim and metal control joints Tape-on paper/metal trims and edgings Fixing gypsum wallboards by adhesives, nails, screws or plaster dabs to studs, joists, nogging, metal firring, timber battens, etc., or direct to solid backgrounds, with joints flush stopped to form continuous linings Jointing compounds and joint reinforcing tapes Paper-covered gypsum coving Plaster for dabs, filling and finishing Vapour barriers and thermal and acoustic insulation when fixed with the lining Plaster skim coat Forming access panels including proprietary components, recesses, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5114 Rigid inorganic linings 5114 Rigid inorganic linings
Rigid sheets of manufactured boards, fixed to framing to form pitched roof sarking, flat roof decking, linings, etc., to walls, ceilings and soffits, and casings to pipe ducts, etc., ready to receive applied finishes

Rigid flat sheets, including fixing, as pitched roof sarking, flat roof decking substrate, linings to walls, ceilings and soffits, pipe ducts and casings, and fire casings, ready to receive applied finishes Rigid flat sheets including: - vermiculite boards - boards of composite construction - GRC sheets - calcium silicate boards - barium sulphate boards - boards and sheets of other similar materials Vapour barriers and thermal and acoustic insulation when fixed with the sheeting Linings, etc., to stairwells and openings where not part of a stair or other component Screws, nails, staples, clips, H, J and similar sections, velcro and other mechanical fixings Forming for access panels, recesses, etc. Forming for openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5115 Rigid plastics linings 5115 Rigid plastics linings
Rigid sheets of plastics, fixed to framing to form pitched roof sarking, flat roof decking, linings, etc., to walls, ceilings and soffits, and casings to pipe ducts, etc., ready to receive applied finishes

Rigid flat sheets, including fixing, as pitched roof sarking, flat roof decking substrate, linings to walls, ceilings and soffits, pipe ducts and casings, and fire casings, ready to receive applied finishes Rigid flat sheets including: - solid plastics sheets - plastic foam boards - laminated plastics boards - boards of composite construction Metal strapping, timber battens and fire-resisting battens to fire casings Vapour barriers and thermal and acoustic insulation when fixed with the sheeting Linings, etc., to stairwells and openings where not part of a stair or other component Screws, nails, staples, clips, H, J and similar sections, velcro and other mechanical fixings Forming for access panels, recesses, etc. Forming for openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5119 Miscellaneous Sheet Linings 5119 Miscellaneous Sheet Linings

No content available for this item.

512 Timber lining 512 Timber lining
5121 Wood wool panels 5121 Wood wool panels
Woodwool board, fixed to framing, as pitched roof sarking, linings, casings, etc., to receive plaster, paint or other finishes

Woodwool panels, with or without channel edging, fixed to framing Vapour barriers when fixed with the sheeting Forming for openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5122 Plywood linings 5122 Plywood linings
Plywood, fixed to framing to form pitched roof sarking, linings, etc., to walls, ceilings and soffits, and casings to pipe ducts, etc., ready to receive applied finishes

Plywood, including fixing, as pitched roof sarking, linings to walls, ceilings and soffits, pipe ducts and casings ready to receive applied finishes Plywood, lead-core plywood, OSB, blockboard, etc. Sheet linings as structural bracing when not fixed as part of the framing Metal strapping, timber battens and fire-resisting battens to fire casings Vapour barriers and thermal and acoustic insulation when fixed with the sheeting Screws, nails, staples, clips, H, J and similar sections, velcro and other mechanical fixings Forming access panels, recesses, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5123 Manufactured timber board linings 5123 Manufactured timber board linings
Manufactured timber boards, fixed to framing to form pitched roof sarking, linings, etc., to walls, ceilings and soffits, and casings to pipe ducts, etc., ready to receive applied finishes

Manufactured timber boards, including fixing, as pitched roof sarking, linings to walls, ceilings and soffits, pipe ducts and casings, ready to receive applied finishes Manufactured timber boards including: - plywood and OSB - blockboard - chipboard - laminated boards - cementitious wood fibre board - waferboard - medium density fibreboard - hardboard - cellulose fibre insulating boards - bitumen-impregnated fibreboard - Lead-core plywood Sheet linings as structural bracing when not fixed as part of the framing Metal strapping, timber battens and fire-resisting battens to fire casings Vapour barriers and thermal and acoustic insulation when fixed with the sheeting Linings, etc., to stairwells and openings where not part of a stair or other component Screws, nails, staples, clips, H, J and similar sections, velcro and other mechanical fixings Forming access panels, recesses, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5124 Solid timber board linings 5124 Solid timber board linings
Solid timber boards, plain edged, rebated or tongued and grooved, laid together to form sarking to pitched roofs, linings to walls, ceilings and soffits, and casings to pipe ducts, etc., ready to receive applied finishes

Boarding, unfinished or sealed, fixed as wall, ceiling, roof and soffit lining, ready to receive applied finishes Sarking to pitched roofs Vapour barriers and thermal and acoustic insulation when fixed as part of the boarding installation Forming access panels, recesses, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

513 Prefinished sheet linings 513 Prefinished sheet linings
5131 Solid timber prefinished linings 5131 Solid timber prefinished linings
Prefinished solid timber sheet and strip linings, boarding and panelling with edges butted, tongued and grooved or rebated, face or secret nailed to framing, laid together to form dado, wall, ceiling and soffit finished-surface linings

Prefinished solid timber linings fixed to studs, beams, joists, battens, etc., and prepared for exposed natural finishes to form dado, wall, ceiling and soffit linings Timber battens provided as part of the installation of the lining including fixing by adhesive or mechanical means Forming access panels, recesses, expansion gaps, etc. Vapour barriers and thermal and acoustic insulation when fixed as part of the lining installation Sanding, sealing, finishing, etc., when required to be executed with the lining either on or off site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5132 Prefinished plywood linings 5132 Prefinished plywood linings
Prefinished plywood sheet linings, with edges butted, tongued and grooved, or rebated, face or secret nailed to framing, with associated battens, cover moulds, trim, etc.

Prefinished plywood board linings fixed to studs, beams, joists, battens, etc., and prepared for exposed natural finishes to form dado, wall, ceiling and soffit linings Timber battens provided as part of the installation of the lining including fixing by adhesive or mechanical means Forming access panels, recesses, expansion gaps, etc. Vapour barriers and thermal and acoustic insulation when fixed as part of the lining installation Sanding, sealing, finishing, etc., when required to be executed with the lining either on or off site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5133 Prefinished manufactured timber board linings 5133 Prefinished manufactured timber board linings
Prefinished manufactured timber sheet linings, with edges butted, tongued and grooved, or rebated, face or secret nailed to framing, with associated battens, cover moulds, trim, etc.

Prefinished manufactured timber board linings fixed to studs, beams, joists, battens, etc., and prepared for exposed natural finishes to form dado, wall, ceiling and soffit linings Timber battens provided as part of the installation of the lining including fixing by adhesive or mechanical means Forming access panels, recesses, expansion gaps, etc. Vapour barriers and thermal and acoustic insulation when fixed as part of the lining installation Sanding, sealing, finishing, etc., when required to be executed with the lining either on or off site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5134 Prefinished fibre cement linings 5134 Prefinished fibre cement linings
Prefinished fibre cement linings, fixed to framing

Prefinished fibre cement linings to walls and ceilings with moulds and jointers to all joints, edges and angles Forming openings with associated trim exposed as part of the lining or panelling Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5135 Prefinished fibrous plaster linings, fixed to framing 5135 Prefinished fibrous plaster linings, fixed to framing
Prefinished fibrous plaster sheets, fixed to framing

Prefinished fibrous plaster sheets, with mouldings and jointers to all joints, edges and angles Forming openings with associated trim exposed as part of the lining or panelling Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5136 Prefinished plasterboard linings 5136 Prefinished plasterboard linings
Prefinished plasterboard linings, fixed to framing

Prefinished plasterboard linings, with mouldings and jointers to all joints, edges and angles Forming openings with associated trim exposed as part of the lining or panelling Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5137 Prefinished rigid plastic linings 5137 Prefinished rigid plastic linings
Prefinished rigid plastics linings, fixed to framing

Prefinished unbacked solid plastics sheeting Prefinished linings with facings of plastics laminates with mouldings and jointers to all joints, edges and angles Studding, grounds and unexposed supports when required to be executed with the lining and panelling Packings, tongues, rebates, screws, backscrewing, screwing and pelleting, adhesive jointing and fixing, and all other means of assembling, jointing and fixing Forming openings with associated trim exposed as part of the lining or panelling Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5138 Prefinished metal faced linings 5138 Prefinished metal faced linings
Prefinished metal faced linings, fixed to framing

Backed plain, embossed and textured metal linings, with moulding and jointers to all joints, edges and angles Studding, grounds and unexposed supports when required to be executed with the lining and panelling Packings, tongues, rebates, screws, backscrewing, screwing and pelleting, adhesive jointing and fixing, and all other means of assembling, jointing and fixing Forming openings with associated trim exposed as part of the lining or panelling Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5139 Sheet metal linings fixed to framing 5139 Sheet metal linings fixed to framing
Sheet metal linings, fixed to framing to form wall, ceiling and soffit linings

Plain, corrugated, embossed and perforated prefinished sheet metal as wall, ceiling and soffit linings, fixed to framing Sheet metal substrates for support, sound absorption etc. On site surface finishing or prefinished Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

515 Trim and protection 515 Trim and protection
5151 Trim to walls, partitions and openings 5151 Trim to walls, partitions and openings
Trim fixed to junctions of horizontal and vertical surfaces, intersections and at edges of openings

Trim of timber, metal, plastics, etc., including architraves, skirtings, cornices, picture rails, cover beads, etc., fixed at junctions of materials and surfaces and at edges of openings except where the trim is integrally associated with & installed under other Work sections Protective coatings and decorative finishes applied off site and preparation to receive protective coatings and decorative finishes on site

5152 Protection rails to linings and services 5152 Protection rails to linings and services
Protection against physical damage, in the form of rails or bumpers fixed to lining

Rails of timber, metal and plastics, fixed to framing to provide protection to linings against physical damage Shaped casings of plywood, metal and plastics to protect piping, cabling, radiators, etc., fixed to linings Corner guards of light sheet metal, plastics, etc., to corners, columns and projections, except where forming part of the lining Rails fixed to framing to protect the linings and act as handrails Bumpers of timber, rubber, etc., fixed to walls, loading docks and openings Preparing surfaces and applying protective coatings, and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

516 Metal wire covering fixed to framings 516 Metal wire covering fixed to framings
5161 Metal wire covering fixed to framing 5161 Metal wire covering fixed to framing
Wire covering fixed to framing

Covering of welded or woven steel wire, chain link steel wire, copper and bronze woven wire, and aluminium woven and link wire mesh, fixed to framing to form air-permeable enclosures and partitions Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

517 Special performance linings 517 Special performance linings
5171 Fire protection linings 5171 Fire protection linings
Linings to walls, ceilings, structural steelwork, ducts etc., to provide a required fire rating, constructed in situ

Timber and/or metal framing to support the lining material Casing of plasterboard, fibrous plaster, calcium silicate, mineral wool and other mineral boards, of the required thickness Fixing lining to framing Forming openings and cutting holes as required to suit sub-contractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5172 Acoustic linings 5172 Acoustic linings
Linings to provide sound absorption

Perforated rigid sheet surfacing, backed with sound absorbent materials, fixed to walls soffits Sound absorbent surfacing materials, fixed to walls and soffits Sound absorbent boards with or without surface covering, fixed to walls and soffits Sprayed sound-absorbent surfacing materials to walls and soffits Anechoic formed shapes, fixed to walls and soffits Acoustic shaped absorbers and reflectors, to reduce or reinforce sound, including supports

5173 Radiation protection linings 5173 Radiation protection linings
Linings to walls, ceilings, structural steelwork, ducts etc., to provide a required radiation protection level, constructed in situ

Timber and/or metal framing to support the lining material Casing of plasterboard, fibrous plaster, and other mineral boards, combined with lead, barium or other radiation barrier treatments, and of the required thickness Fixing lining to framing Special jointing requirements Forming openings and cutting holes as required to suit sub-contractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5174 Impact resisting linings 5174 Impact resisting linings
Linings to walls, ceilings, structural steelwork, ducts etc., to provide increased levels of impact resistance over comparable boards, constructed in situ

Timber and/or metal framing to support the lining material Casing of high density plasterboard, fibrous plaster, and other mineral boards, with or without reinforcing, and of the required thickness Fixing lining to framing Forming openings and cutting holes as required to suit sub-contractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

518 Miscellaneous Linings 518 Miscellaneous Linings 519 Ancillary items; repairing and renovating/altering linings 519 Ancillary items; repairing and renovating/altering linings
52 Partitions and doors 52 Partitions and doors
521 Partitions 521 Partitions
5211 Metal frame partitions 5211 Metal frame partitions
Proprietary and non-proprietary metal frame partitions of all types

Partitions of dry construction, with a framework of steel stud and/or aluminium extrusions, fixed to floors, walls and ceilings, within which are installed horizontal and vertical members, door frames, trim, etc. Modular and/or purpose made prefinished panels of all types Assembling panels without studs, framing, etc., to form partitions, cubicles and cubicle partitions with panels placed or slid into position between floor plates and top rails Connecting, stiffening and fixing devices for frames or panels Skirtings, head mouldings, trim, etc., where an integral part of the partitioning system, and supporting legs and brackets where partitions are clear of the floor Glass sheets fixed into the framing Metal or timber studs/nogs installed within the aluminium framework to support solid sections of the partitioning Plasterboard or other board fixed to studs, stopped and skim coated or otherwise prepared to receive surface finish Panels and sheets fixed to studs Finishes of paint, fabric, vinyl, veneer and other thin sheets, applied on or off site Provision for and of electrical, communication and other building services in partitions, ready for connection to supply services Doors, windows, hatches, glazed lights, openings, shutters, etc., including hardware where an integral part of the partitioning system Curtain tracks and rails where integrally attached to the partitions Additional provisions to the standard partition system to achieve improved acoustic performance and fire rating Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5212 Timber frame partitions 5212 Timber frame partitions
Proprietary and non-proprietary timber frame partitions of all types

Partitions of dry construction, with a framework of timber and aluminium extrusions, fixed to floors, walls and ceilings, within which are installed horizontal and vertical members, door frames, trim, etc. Modular and/or purpose made prefinished panels of all types Assembling panels without studs, framing, etc., to form partitions, cubicles and cubicle partitions with panels placed or slid into position between floor plates and top rails Connecting, stiffening and fixing devices for frames or panels Skirtings, head mouldings, trim, etc., where an integral part of the partitioning system, and supporting legs and brackets where partitions are clear of the floor Glass sheets fixed into the framing Plasterboard or other board fixed to studs, stopped and skim coated or otherwise prepared to receive surface finish Panels and sheets fixed to studs Finishes of paint, fabric, vinyl, veneer and other thin sheets, applied on or off site Provision for and of electrical, communication and other building services in partitions, ready for connection to supply services Doors, windows, hatches, glazed lights, openings, shutters, etc., including hardware where an integral part of the partitioning system Curtain tracks and rails where integrally attached to the partitions Additional provisions to the standard partition system to achieve improved acoustic performance and fire rating Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5214 Toilet and cubicle partitions 5214 Toilet and cubicle partitions
Proprietary and non-proprietary toilet partitions and cubicle partitions, constructed of slabs and sheets, fixed directly to each other and to the building fabric, or set into rails, frames and posts

Slabs or sheets of stone, terrazzo, precast concrete, GRC, solid plastics, plastics or metal-faced sheets, safety glass and other materials Slabs or sheets fixed directly to each other and to the building fabric Slabs or sheets set into a framework of rails, transoms, posts, etc., taken to and fixed to floors, walls and ceilings, or supported on legs and brackets Doors, windows, hatches, glazed lights, openings, etc., and associated frames where an integral part of the partition system, including hardware Provision for electrical, communication and other building services in partitions, ready for installation and connection to supply services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5215 Wood plank and board partitions 5215 Wood plank and board partitions
Wood planks and boards laid vertically or horizontally into frames to form partitions or cubicle partitions

Solid wood planks, including glue jointed planks, with butt or T&G joints, prefinished or prepared to receive painting, clear finishing or coverings Planks and boards of manufactured timber, prefinished or prepared to receive finishing, including sheet covering Supporting framework to support planks and boards, with posts, rails, transoms, etc. Doors, windows, openings, etc., and associated frames where an integral part of the partition system, including hardware Provision for electrical and communication services in partitions, ready for installation and connection to supply services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5216 Panelized partitions 5216 Panelized partitions
Self spanning planks, boards and panels of any material, laid vertically or horizontally into edge channels or frames to form partitions

Self spanning, solid or composite, proprietary planks, boards or panels installed between structural elements Self spanning, solid or composite, non-proprietary planks, boards or panels installed between structural elements Planks, boards or panels prefinished or prepared to receive finishing, including sheet covering Supporting framework or channels to support planks, boards or panels Doors, windows, openings, etc., and associated frames where an integral part of the partition system, including hardware Provision for services in partitions, ready for installation and connection to supply services Additional provisions to the standard system to achieve improved acoustic performance and fire rating Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

522 Special performance partitions 522 Special performance partitions
5221 Fire-rated partitions 5221 Fire-rated partitions
Partitions of proprietary or non-proprietary construction, including plenum and ceiling barriers, to provide a specified fire-rating

Proprietary fire-rated partitions to provide a specified fire rating, installed between two horizontal or sloping fire-rated floors and/or roofs, complete with doors, windows, glazed panels, access panels and openings protected by heat-activated shutters or covers Fire-rated partitions constructed on site, faced with fibre cement, fibrous plaster, plasterboard, etc., to provide a specified fire rating, with framing and linings conforming to approved practice, prepared to receive fire-rated doors, windows, glazed panels, access panels and openings, protected by heatactivated shutters or covers Fire-rated barriers constructed in space above suspended ceilings when not part of the ceiling system Partitions to be self-finished or finished after installation Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5222 Acoustic-rated partitions 5222 Acoustic-rated partitions
Partitions of proprietary or non-proprietary construction, to provide a specified sound attenuation

Proprietary sound-rated partitions to provide a specified level of sound attenuation, complete with doors, windows, glazed panels and access panels Sound-rated partitions constructed on site of fibre cement, fibrous plaster, plasterboard, etc., with acoustic clip fixings, to provide a specified level of sound attenuation, prepared to receive doors, windows, glazed panels and access panels, designed and constructed to provide the same or better sound attenuation as the partition Sound-rated barriers constructed in space above suspended ceilings when not part of the ceiling system Partitions to be self-finished or finished after installation Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5223 Heat-insulated partitions 5223 Heat-insulated partitions
Partitions of proprietary or non-proprietary construction erected between areas within a building with different levels of temperatures and relative humidity

Proprietary partitions to provide a specified insulation value and a total barrier to moisture vapour, either in one direction through the partition or in both directions Partitions constructed on site to provide a barrier to the transmission of heat and moisture vapour Windows, doors and glazed panels to provide the same insulation levels as the partition Partitions to be self-finished or finished after installation Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5224 Proprietary service wall partitions 5224 Proprietary service wall partitions

No content available for this item.

5225 Operable walls 5225 Operable walls

No content available for this item.

5226 Ballistics/security partitions 5226 Ballistics/security partitions

No content available for this item.

523 Interior doors and windows 523 Interior doors and windows
5231 Interior doors, windows, frames and doorsets 5231 Interior doors, windows, frames and doorsets
Interior windows, doors and frames when not part of a partition system

Suites of windows and frames, doors and frames, fixed lights, hatches, panels, etc., installed internally. Glazing, hardware, ventilation panels, etc., supplied and fixed off site Fixing supplied hardware Frames with provision for doors, sidelights and fanlights Door sets of proprietary door frames and doors, including hinged, sliding, roll-up, horizontally rolling, up and over, sliding/folding, sliding/stacking and revolving doors and enclosing screens with hardware supplied and /or fitted Architraves, trim, etc., when supplied with the suites Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

524 Fire-rated interior doors and windows 524 Fire-rated interior doors and windows
5241 Fire-rated timber door, window and frame assemblies 5241 Fire-rated timber door, window and frame assemblies
Proprietary and non-proprietary fire-rated door, window and frame assemblies including fixed lights, hatches, shutters, panels etc. to provide a specified fire-resistance, with manual or automatic operation when not part of a partition system

Proprietary fire-rated screen assemblies incorporating doors, windows, fixed lights, hatches, shutters, panels, etc., with integral hardware Fire-rated door, window and frame assemblies with integral hardware Single leaf hinged fire-rated doors and frames Double leaf hinged fire-rated doors and frames Sliding gravity operated fire-rated doors and frames Sliding counterbalanced fire-rated doors and frames Sliding and roll-up fire-rated shutters and frames Hardware incorporated in the fire-rated doors and frames Installation Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

5242 Fire-rated steel door, window and frame assemblies 5242 Fire-rated steel door, window and frame assemblies
Proprietary and non-proprietary fire-rated window, door and frame assemblies to provide a specified fire-resistance, with manual or automatic operation

Single leaf hinged fire-rated doors and frames Double leaf hinged fire-rated doors and frames Sliding gravity operated fire-rated doors and frames Sliding counterbalanced fire-rated doors and frames Sliding and roll-up fire-rated shutters and frames Hardware incorporated in the fire-rated doors and frames Fire-rated window and frame assemblies with integral hardware Fire-rated roof windows and lights Installation Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

525 Special function interior doors and windows 525 Special function interior doors and windows
5251 Acoustic rated timber doors, windows and frame assemblies 5251 Acoustic rated timber doors, windows and frame assemblies
Proprietary and non-proprietary sound insulated door, window and frame assemblies to provide a specified level of sound attenuation when not part of a partition system

Sound insulated hinged door and frame assemblies, with integral hardware Sound insulated sliding doors and frame assemblies, with integral hardware Sound insulated sliding/stacking door and frame assemblies with integral hardware Sound insulated sliding/folding and pantograph doors and frame assemblies with integral hardware Sound insulated windows of two or more panes, set in single or split frames, for building into prepared openings Hardware, flashings, trim and screens where forming part of the window assembly Installation Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

5255 Interior hatches and access panels 5255 Interior hatches and access panels

No content available for this item.

5258 Miscellaneous special function interior doors and windows 5258 Miscellaneous special function interior doors and windows

No content available for this item.

526 Screens and miscellaneous items 526 Screens and miscellaneous items
5261 Interior timber screens and shutters 5261 Interior timber screens and shutters
Timber screens and shutters, fixed internally, for decorative purposes, security and light control; screens with infill of louvres, mesh, bars, etc., to prevent the ingress of people, animals and objects

Timber decorative screens, including associated frames Timber screens and associated frames to openings, including louvres, wire mesh screening to air intake and relief openings to exclude animals and debris Timber screens and associated frames and supports, fixed internally to control heat and light, with fixed or adjustable blades Timber shutters to doors and windows, hinged or sliding, fixed internally Timber lightproof fixed louvred screens and frames Securing screens and shutters to the building fabric, with all necessary anchors, fixings, etc. Hardware, operating gear Connecting electrically operated items to a designated point of electrical supply Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5262 Fire-rated screen assemblies 5262 Fire-rated screen assemblies
Proprietary fire-rated screen assemblies incorporating doors, windows, fixed lights, hatches, shutters, panels, etc., to provide a specified fire-resistance

Proprietary fire-rated screen assemblies incorporating doors, windows, fixed lights, hatches, shutters, panels, etc., with integral hardware Installation Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

529 Ancillary items 529 Ancillary items
53 Ceiling systems 53 Ceiling systems
531 Suspended ceilings 531 Suspended ceilings
5311 Suspended tile ceilings on proprietary suspension systems 5311 Suspended tile ceilings on proprietary suspension systems
Suspended tile ceilings supported on proprietary suspension systems

Proprietary suspension and framing members and grid to receive drop in tiles, panels, etc. Self-finished tiles, boards, panels, sheets, strips, open cells, etc., set into the ceiling grid Tiles, boards, panels, sheets, strips, open cells, etc., to receive a decorative finish, set into a ceiling grid Perimeter trim Insulation installed as a part of the ceiling installation Access panels, recesses, etc. Fire, smoke and sound barriers above false ceiling level if installed as part of the ceiling installation Reveals and lining to roof light openings, changes of level, etc., including all supports Preparing the ceiling and grid to receive heating, ventilating, lighting, fire detection and control systems, and for other building services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5312 Suspended ceilings on non-proprietary suspension systems 5312 Suspended ceilings on non-proprietary suspension systems
Suspended ceilings, of dry construction, with ceiling finish or tiles supported on a suspension system made on site, with a main framework and a supporting grid suspended from the building fabric

Suspension and framing members and grid to receive tiles, panels, sheet surfacing, etc. Self-finished tiles, boards, panels, strips, open cells, etc., and plasterboard, fibre cement board, fibrous plaster, manufactured timber boards, etc., to receive a decorative finish, set into or supported from a ceiling grid or fixed direct to ceiling framing Perimeter trim Insulation installed as a part of the ceiling installation Access panels, recesses, etc. Fire, smoke and sound barriers above false ceiling if installed as part of the ceiling installation level Reveals and lining to roof light openings, changes of level, etc., including all supports Preparing the ceiling and grid to receive heating, ventilating, lighting, fire detection and extinguishing systems, and for other building services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5313 Suspended sheet ceilings 5313 Suspended sheet ceilings
Suspended sheet ceilings fixed to the underside of a proprietary suspension systems

Proprietary suspension and framing members and grid to receive sheets, panels, etc. Self-finished sheets, boards, panels, strips, etc., fixed to the ceiling grid Plasterboard, fibre cement board, fibrous plaster, manufactured timber boards, etc., to receive a decorative finish, fixed to the ceiling grid Insulation installed as a part of the ceiling installation Access panels, recesses, etc. Fire, smoke and sound barriers above false ceiling level if installed as part of the ceiling installation Reveals and lining to roof light openings, changes of level, etc., including all supports Preparing the ceiling and grid to receive heating, ventilating, lighting, fire detection and control systems, and for other building services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

532 Special performance ceilings 532 Special performance ceilings
5321 Fire-rated suspended ceiling systems 5321 Fire-rated suspended ceiling systems
Ceiling systems to provide a fire-rated barrier at suspended ceiling level

Proprietary or non-proprietary suspended ceilings to provide a specified fire rating as a barrier between the occupied space and the space above, complete with insulation and provision for building services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5322 Acoustic-rated suspended ceiling systems 5322 Acoustic-rated suspended ceiling systems
Ceiling systems to provide a sound attenuation barrier at suspended ceiling level

Proprietary or non-proprietary suspended ceiling systems to provide a specified sound attenuation between the room and the space above the suspended ceiling Provision for building services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5323 Suspended ceiling systems with integrated building services 5323 Suspended ceiling systems with integrated building services
Suspended ceiling systems with integrated building services

Proprietary or non-proprietary suspended ceiling systems incorporating the specified building services such as illumination, ventilation, air conditioning, electric heating, piped services to provide heating and cooling, and to absorb energy from the illumination sources Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5324 Insulated suspended ceilings 5324 Insulated suspended ceilings

No content available for this item.

5325 Special hygiene suspended ceilings 5325 Special hygiene suspended ceilings

No content available for this item.

533 Membrane ceilings 533 Membrane ceilings
5331 Stressed membrane suspended ceilings 5331 Stressed membrane suspended ceilings
Suspended ceiling systems using a stressed membrane as the ceiling surface

Suspended ceilings of stressed membranes, either opaque or translucent Attachment to fixing points for supporting and tensioning the membrane Non-fixed work (see Explanatory notes)

5332 Fabric suspended ceilings 5332 Fabric suspended ceilings
Suspended ceilings of fabric or flexible materials

Suspended ceilings of fabric, sheet plastics and flexible materials secured at edges and with intermediate supports Supporting side members where supplied as an integral part of the ceiling installation

539 Ancillary items; repairing and altering ceilings 539 Ancillary items; repairing and altering ceilings
54 Floors 54 Floors
541 Raised access floors 541 Raised access floors
5411 Proprietary raised access floors 5411 Proprietary raised access floors
Proprietary raised access floors of dry construction, raised above the structural floor slab to create space for the distribution of building services, with removable panels for access

Adjustable pedestals or pad supports Floor panels with or without a floor finish Frame to panels (if any) Sheet steel box duct sections with covers Special panels for ventilation, air conditioning and other services Service outlet boxes Removable access panels Skirtings, edge trim, etc., executed as part of the access floor system Fire, smoke and sound barriers Bracing Ramps and accessways from lower adjacent floor levels Adhesives, bearing pads, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5412 Non-proprietary raised access floors 5412 Non-proprietary raised access floors
Access floors of dry construction, built in situ, raised above the structural floor slab to create space for the distribution of building services, with removable panels for access

Battens and other supports for flooring panels Removable floor panels, fixed to supports, with or without a floor finish Special panels for ventilation and other services Fire, smoke and sound barriers Bracing Ramps and accessways from lower adjacent floor levels Service outlet boxes Removable access panels Adhesives, bearing pads, etc. Forming openings and cutting holes for all penetrations, including building services, in locations established by others Skirtings, edge trim, etc., executed as part of the access floor system Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

542 Ducting for services 542 Ducting for services
5421 Flush floor ducting 5421 Flush floor ducting

No content available for this item.

5422 Surface-mounted floor ducting 5422 Surface-mounted floor ducting
Surface-mounted floor ducting, including ducting fixed to the substrate below the floor finish

Surface-mounted floor ducting for electrical and communications, services, fixed to the substrate, with provision for entry and exit of services and for outlet points Non-fixed work (see Explanatory notes)

5423 Flush and surface-mounted wall and ceiling ducting for building services 5423 Flush and surface-mounted wall and ceiling ducting for building services
Flush and surface-mounted wall and ceiling ducting, including skirting ducting, with or without removable covers, to accommodate pipes and/or cables

Recessed ducting, in walls and ceilings, for building services, with provision for entry and exit of service lines and for outlet points, and with flush cover plates Surface-mounted ducting, for building services, fixed to the substrate, with provision for entry and exit of services and for outlet points Non-fixed work (see Explanatory notes)

543 Floors 543 Floors
5431 Particleboard floors 5431 Particleboard floors
Floors of particleboard, fixed to framing

Sound insulating packers and supports, fixed to framing Thermal insulation and/or vapour barriers fixed at the same time as the flooring Particleboard, with butt, fillet, adhesive or shaped joints, fixed to framing Sanding, sealing and otherwise preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5432 Timber strip floors 5432 Timber strip floors
Floors of timber strip, fixed to framing

Sounds insulating packers and supports, fixed to framing Thermal insulation and/or vapour barriers fixed at the same time as the flooring Timber strip flooring, with edges tongued and grooved or butt jointed, fixed to floor framing, either face nailed or secret nailed Proprietary or non-proprietary supporting clips, fixed to timber or concrete subfloor Sanding, sealing and otherwise preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5433 Plywood floors 5433 Plywood floors
Floors of plywood, fixed to framing

Sound insulating packers and supports, fixed to framing Thermal insulation and/or vapour barriers fixed at the same time as the flooring Plywood flooring, fixed to framing Sanding, sealing and otherwise preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5434 Laminated timber floors 5434 Laminated timber floors
Floors of edge-glued laminated solid timber floor boards, fixed to framing

Sound insulating packers and supports, fixed to framing Thermal insulation and/or vapour barriers fixed at the same time as the flooring Edge-glued solid timber boarding, fixed to framing Sanding, sealing and otherwise preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5438 Miscellaneous floors 5438 Miscellaneous floors
Floors of non standard material, fixed to framing

Sound insulating packers and supports, fixed to framing Thermal insulation and/or vapour barriers fixed at the same time as the flooring Flooring, fixed to framing Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

549 Ancillary items; repairing and altering floors 549 Ancillary items; repairing and altering floors
55 Joinery fixtures and hardware 55 Joinery fixtures and hardware
551 Fixtures 551 Fixtures
5511 Purpose-made fixtures 5511 Purpose-made fixtures
Purpose-made, joinery and cabinetry fixtures of all types, made principally of timber, metal, plastics or of composite materials, incorporating stock items of hardware, drawers, etc.

Fixtures, including: - counters - desks - benches - worktops - wardrobes - dressers - cupboards, including for kitchen and bathroom - cabinets, including for kitchen and bathroom - vanity units - tables - storage fittings - shelves, fixed and adjustable - mobile shelving, manually or electrically operated - lockers - beds and divans, including foldaway beds - white boards - chalk boards - marker boards - tack boards - magnetic display boards - operable display board - bulletin boards - telephone hoods - ironing units - merchandise display units - baby changing units Hardware supplied with the fixtures Fixings and supports Preparing fixtures for service outlets Preparing surfaces and applying decorative finishes off site Preparing surfaces to receive decorative finishes on site Non-fixed work (see Explanatory notes)

5512 Proprietary Fixtures 5512 Proprietary Fixtures
Proprietary and stock prefabricated fixtures, made principally of timber, metal, plastics or of composite materials, complete with hardware

Fixtures, including: - counters - desks - benches - worktops - wardrobes - dressers - cupboards, including for kitchen and bathroom - cabinets, including for kitchen and bathroom - cupboards - cabinets - vanity units - tables - storage fittings - shelves, fixed and adjustable - mobile shelving, manually or electrically operated - lockers - beds and divans, including foldaway beds - white boards - chalk boards - marker boards - tack boards - magnetic display boards - operable display board - bulletin boards - telephone hoods - ironing units - merchandise display units - baby changing units Hardware supplied with the fixtures Fixings and supports Preparing fixtures for service outlets Preparing surfaces and applying decorative finishes off site Preparing surfaces to receive decorative finishes on site Non-fixed work (see Explanatory notes)

5513 Preformed and prefinished room units 5513 Preformed and prefinished room units
Preformed and prefinished bathroom, shower, kitchen and similar room units

Complete room units of proprietary or non-proprietary design and construction forming bathrooms, showers, kitchens and similar rooms, prepared to receive all services. All with baths, showers, cupboards, tops, sinks, basins, etc., cast or fixed integrally into the units, walls, floors and ceilings fully finished and all tapware and fixtures fitted ready for connection Shower units, complete with bases, walls and doors Bath units, complete with bath, walls and doors Kitchens complete with benches, tops, over- and under- cupboards Installing in position and connecting up to services Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5514 Seating 5514 Seating
Seating of all types, proprietary and purpose made, for places of assembly, fixed to the building fabric

Theatre and cinema seating Lecture room seating with continuous writing desk Tablets arm seats Pews Stadium seats set on continuous steps Retractable tiered stadium seating

5516 Proprietary sub-fixtures and hardware 5516 Proprietary sub-fixtures and hardware

No content available for this item.

5517 Bench tops 5517 Bench tops

No content available for this item.

5518 Sundry fixtures 5518 Sundry fixtures
Sundry fabricated fixtures, proprietary and purpose made

Clothes lines and hoists of all types Key cabinets Letter boxes Coat racks and umbrella stands Ashtrays Children’s play equipment

552 Hardware 552 Hardware
5521 Hardware 5521 Hardware
For doors and windows, supply and installation of components and items of metal, plastics and other materials, such as opening, closing and locking devices, mechanical fasteners, etc., which are not supplied and off-site fixed, with the items to which they relate

Door stops, retaining devices, draughtproofing strips etc. Door furniture, including push plates, pull handles, kick plates, etc. Butts, hinges, pivots and other opening and closing devices Spring butts, door springs, door closers and other self-closing devices Panic bolts, espagnolette bolts, security bolts and other securing devices Locks and latches

5528 Miscellaneous hardware 5528 Miscellaneous hardware
Supply and installation of, sundry or special, components and items of metal, plastics and other materials, such as mechanical fasteners, supports, brackets, etc., which are not supplied and off-site fixed, with the items to which they relate

Waterbars not built in Proprietary safes Drawers and slides Safety anchors

553 Blinds and curtains 553 Blinds and curtains
5531 Blinds to openings 5531 Blinds to openings
Blinds, of fabric, plastics, wood and metal, manually or electrically operated, fitted internally and externally to openings

Vertically operated blinds, sliding and rolling Vertical Venetian-type blinds Horizontal Venetian-type blinds Black-out and brown-out blinds Brackets and fixings Pelmets and valances when included in the blind installation Manual or power operation Connecting power-operated blinds to a designated point of electrical supply Non-fixed work (see Explanatory notes)

5532 Curtains and curtain tracks 5532 Curtains and curtain tracks
Curtains and curtain tracks, fixed internally to walls and ceilings

Curtains to windows and openings Cubicle curtains Ceiling hung curtains Shower curtains Strip clear plastics curtains to refrigerated cabinets Flame-retardant coatings to curtains Tracks for curtains Ceiling tracks for movable equipment Brackets and fixings Pelmets when included in curtain installations Manual or power operation Connecting power-operated curtains to a designated point of electrical supply Non-fixed work (see Explanatory notes)

5538 Miscellaneous blinds and curtains 5538 Miscellaneous blinds and curtains

Curtains to windows and openings Cubicle curtains Ceiling hung curtains Shower curtains Strip clear plastics curtains to refrigerated cabinets Flame-retardant coatings to curtains Tracks for curtains Ceiling tracks for movable equipment Brackets and fixings Pelmets when included in curtain installations Manual or power operation Connecting power-operated curtains to a designated point of electrical supply Nonfixed work (see Explanatory notes)

554 Awnings 554 Awnings
5541 Operable awnings 5541 Operable awnings
Awnings, operable manually or electrically, of solid construction or fabric covered

Metal framed fabric or plastics covered retractable awnings, fixed externally over decks, pergolas, window and door openings, manual or power operated Louvred awnings, manual or power operated Umbrella-type awnings Connecting power-operated awnings to a designated point of electrical supply Non-fixed work (see Explanatory notes)

5542 Fixed awnings, hoods and canopies 5542 Fixed awnings, hoods and canopies
Fixed awnings, hoods and canopies, fixed externally over window and door openings

Fixed awnings, hoods and canopies, with metal, timber and plastics framing, covered with roofing materials, fabrics and opaque or translucent plastics

5544 Operable awnings, hoods and canopies 5544 Operable awnings, hoods and canopies

No content available for this item.

556 Metalwork and composite fixtures 556 Metalwork and composite fixtures
5561 Metal and composite stairs and ladders 5561 Metal and composite stairs and ladders
Metal and composite materials with metal, for internal stairs and ladders

Fabricated metal or composite stairs, tread and riser units, including supporting strings and framing for flights and landings, either with solid steel or grille treads and landings, or prepared to receive precast concrete or timber or laminated timber treads and landings Prefabricated metal or composite stairs, including curved and helical stairs, with tread units, strings and vertical supports Fabricated metal or composite stairs, principally of sheet steel, with pans for horizontal surfaces, prepared to receive cementitious or other flooring material Metal or composite ladders, fixed to the building structure, with strings extended as handrails as required Safety hoops, etc., secured to ladders Proprietary or non-proprietary loft ladders including associated hatch doors Handrails of all materials Fixing all items and associated components to the building fabric including all bolts, cleats and other fixings Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5562 Metal and composite handrails, balustrades and barriers 5562 Metal and composite handrails, balustrades and barriers
Internal balustrades consisting largely of a metal or composite structure, includes infill and handrails. Balustrades that are separate elements from the building fabric and when not associated with and/or included in other Work sections

Handrails of all materials Metal or composite stair balustrading, with rails, posts, uprights, newels, etc., of metal or composite materials with balusters, balustrading or prepared to receive balustrading infill of other materials Metal or composite barriers and balustrading, with rails, bars, pipes, mesh screening, etc., of metal or composite material or prepared to receive infill screening of other materials Infilling of glass, plastics, metal or composite material and other sheet or fabricated material to balustrades and barriers when supplied as part of the balustrading and barriers Fixing all items and associated components to the building fabric including all bolts, cleats and other fixings Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5565 Metal and composite shelving, racking and display fixtures 5565 Metal and composite shelving, racking and display fixtures

No content available for this item.

5568 Metal and composite fixtures 5568 Metal and composite fixtures
Interior fixtures constructed principally of metal, using one or more than one metal

Composite metal items Composite metal screens and shutters Composite metal sheet fabricated items Composite metal miscellaneous items

557 Timber fixtures 557 Timber fixtures
5571 Timber stairs and ladders 5571 Timber stairs and ladders
Timber stairs and ladders providing access between different internal levels of a building

Timber stairs with strings, risers, treads, newels, landings, etc., prefabricated or constructed on site Timber helical and curved stairs Timber ladders with treads, rungs and strings, with the strings extended as handrails as required, fitted with safety hoops Proprietary or non proprietary loft ladders, including associated hatch doors Timber treads, including laminated timber treads, attached to concrete and metal stair strings and supports Landing framing Handrails of all materials Fixing all items and associated components, including bolts, brackets, cleats, etc., and securing the whole assembly to the building fabric Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5572 Timber floor trench and pit covers and floor and roof hatches 5572 Timber floor trench and pit covers and floor and roof hatches
Timber covers, with associated frames, to floor pits and trenches, and frames and covers to openings in floors and roofs

Timber covers and frames to floor pits and trenches Timber hatches and frames to floor and roof openings, with opening gear Building in or securing frames to the building fabric with all necessary anchors, fixings etc. Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Non-fixed work (see Explanatory notes)

5573 Miscellaneous decorative woodwork 5573 Miscellaneous decorative woodwork
Dressed timber decorative items including fireplace surrounds, mantelpieces, brackets, finials, fretwork, etc.

Decorative timber fireplaces and mantelpieces Decorative finials, brackets and fretwork strips Decorative columns, pilasters, pediments, etc. Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

5574 Timber handrails and balustrades interior 5574 Timber handrails and balustrades interior
Internal balustrades and barriers consisting largely of a timber structure, including infill and handrails. Balustrades that are separate elements from the building fabric and when not associated with and/or included in other Work sections

Timber or non-timber handrails Timber stair balustrading, with rails, posts, uprights, newels, etc., with timber balusters, timber balustrading or prepared to receive balustrading infill of other materials Timber barriers and balustrading, with rails, posts, uprights, screening, etc., with timber balusters, timber balustrading or prepared to receive infill screening of other materials Infilling of glass, plastics, non-ferrous metal and other sheet or fabricated material to balustrades and barriers when supplied as part of the balustrading and barriers Fixing all items and associated components to the building fabric including all bolts, cleats, brackets and other fixings Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

558 Miscellaneous fixtures 558 Miscellaneous fixtures

No content available for this item.

559 Ancillary items; repairing and altering fixtures and fittings 559 Ancillary items; repairing and altering fixtures and fittings
56 Specialist equipment and assemblies 56 Specialist equipment and assemblies
561 Specialist equipment - A to D 561 Specialist equipment - A to D
5615 Agricultural equipment 5615 Agricultural equipment

No content available for this item.

5618 Astronomical equipment 5618 Astronomical equipment

No content available for this item.

5619 Cultural items 5619 Cultural items

No content available for this item.

562 Specialist equipment - E to G 562 Specialist equipment - E to G
5621 Ecclesiastical equipment 5621 Ecclesiastical equipment

No content available for this item.

5625 Educational equipment 5625 Educational equipment

No content available for this item.

5628 Funerary equipment 5628 Funerary equipment

No content available for this item.

563 Specialist equipment - H to K 563 Specialist equipment - H to K 564 Specialist equipment - L 564 Specialist equipment - L
5641 Laboratory equipment 5641 Laboratory equipment

No content available for this item.

5645 Laundry equipment 5645 Laundry equipment

No content available for this item.

5648 Library equipment 5648 Library equipment

No content available for this item.

565 Specialist equipment - M to P 565 Specialist equipment - M to P 566 Specialist equipment - R 566 Specialist equipment - R
5661 Research equipment 5661 Research equipment

No content available for this item.

5665 Retailing equipment 5665 Retailing equipment

No content available for this item.

567 Specialist equipment - S 567 Specialist equipment - S 568 Specialist equipment - T to Z 568 Specialist equipment - T to Z 569 Specialist assemblies 569 Specialist assemblies
5691 Specialist assemblies 5691 Specialist assemblies
Assemblies, designed to comply with specific requirements, prepared for connections to building services

Proprietary acoustically-insulated enclosures Proprietary anechoic enclosures Proprietary bathrooms Proprietary cold rooms Proprietary electromagnetically screened enclosures Proprietary temperature controlled enclosures Proprietary ventilated temperature controlled enclosures Proprietary deep-freeze rooms Proprietary spray booths Proprietary welding booths Proprietary fire-resistant vaults Proprietary security vaults Proprietary storage vaults Proprietary flammable goods storage systems

57 Furniture and appliances 57 Furniture and appliances
571 Loose appliances 571 Loose appliances
5711 Loose appliances 5711 Loose appliances
Items not fixed to the building fabric but needing to be serviced by temporary connection to energy sources

Loose equipment including: - refrigerators and deep freeze units - refrigerated display cabinets - microwave ovens - hot plates, cooking equipment - dryers and drying cabinets - electric heaters, radiators - fans, air conditioners, dehumidifiers - television sets, DVDs - lamps - office equipment - vending machines - gaming machines - copy boards - heated cupboards - gas hot plates and cooking equipment - gas heater and dryers

572 Furniture and fittings 572 Furniture and fittings
5721 Furniture and fittings 5721 Furniture and fittings
Furniture and fittings used by the building's occupants but not fixed to the building fabric

Furniture and fittings of all types and materials, including: - tables - chairs and seats - beds and wardrobes - storage shelves, cupboards and lockers - mats, carpets and loose floor coverings - exhibition and display equipment - decorations

5722 Workstation systems 5722 Workstation systems
Office workstation systems consisting of coordinated and matched desk systems based around desks and screens, used by the building's occupants but not fixed to the building fabric

Workstations, including: - desk - screens - shelves - storage units, cupboards and credenzas - filing units - other accessories - wire management for wired services

58 Signs and features 58 Signs and features
581 Signs and displays 581 Signs and displays
5811 Signs 5811 Signs
Signs, directories, notice boards, advertising signs, letters, plaques, symbols and emblems of all kinds for identification, information and directional purposes mainly, but not exclusively, internal

Door and floor numbering and lettering as discrete signs Nameplates, plaques, identification symbols, etc., of all kinds and materials Directional signs, signboards, noticeboards, etc., of all kinds and materials Shop front lettering, emblems, symbols, etc., of all kinds and materials Supports when supplied with the signs

5814 Signwriting 5814 Signwriting
Signwriting to provide identification, information and directional signs

Signwriting on all surfaces, using all materials including gold leaf, both internal and external 582 Artwork and features 5821 Murals, graphic artworks and applied decoration Murals and applied decoration Murals, paintings and drawings produced off site and fixed to the building fabric Frescoes and murals applied to the building fabric Supergraphics Photomurals, printed material 5822 Sculptural artworks Three-dimensional artworks fixed to the building fabric Free standing sculpture, fixed to the building fabric Metal, timber and ceramic constructions fixed to the building fabric Sculptural bas reliefs fixed to or part of the building fabric Plastics domes, etc. (39-11) 589 Ancillary items; repairing and altering signs and features 5891 Ancillary items 5897 Cleaning, repairing and renovating existing signs and features Cleaning, repairing and renovating existing signs and features 5898 Alteration

582 Artwork and features 582 Artwork and features
5821 Murals, graphic artworks and applied decoration 5821 Murals, graphic artworks and applied decoration
Murals and applied decoration

Murals, paintings and drawings produced off site and fixed to the building fabric Frescoes and murals applied to the building fabric Supergraphics Photomurals, printed material

5822 Sculptural artworks 5822 Sculptural artworks
Three-dimensional artworks fixed to the building fabric

Free standing sculpture, fixed to the building fabric Metal, timber and ceramic constructions fixed to the building fabric Sculptural bas reliefs fixed to or part of the building fabric Plastics domes, etc. (39-11)

589 Ancillary items; repairing and altering signs and features 589 Ancillary items; repairing and altering signs and features
Feedback