CBI - Reference

Preparing surfaces to receive coatings Bonding agents Dash coat to provide bond Single or multi-coat work of all types, externally and internally Solid plaster partitions Waterproof rendering Special aggregates and admixtures to coatings including plastics beads, waterproofing agents, colour, etc. Moulded cornices, string courses, architraves, skirtings, cappings, etc., run in coatings Control joints Metal beads, nosings, stops, jointing strips, etc. Joint and angle reinforcement of scrim, wire netting, mesh, lathing, etc. Finishing against all penetrations Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Protective and decorative coatings, the aggregates bonded by the use of acrylic polymer or resin binders, sprayed and/or trowelled on to internal or external walls, ceilings and soffits Preparing surfaces to receive coatings Bonding agents Special aggregates and admixtures incorporated into the coatings Fibreglass and/or plastics reinforcing mesh Dividing strips, weather bars Special aggregates and admixtures pressed into the finished face Forming features Control joints Metal beads, nosings, stops, etc. Finishing against all penetrations Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

Preparing surfaces to receive finish Spray applied coating of polyurethane, polyester, epoxy, polypropylene and other plastics, applied with one or more coats, of selected colour, surface finish and thickness Fibreglass as sheet reinforcing or incorporated into the coating Finishing against all penetrations Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

Pneumatic and hand tools applied to concrete surfaces to remove the top surface and provide a keyed surface to receive applied trowelled finishes Acids and other chemicals, applied alone or incorporated into an absorbent medium applied to trowelled finishes Sand blasting

Preparing substrate Isolation layer for unbonded finish Screeds and toppings, including granolithic, concrete, etc., isolated from or mechanically bonded to the concrete surface, with or without a bonding agent Cement-based toppings laid into metal pans in stair treads, etc. Synthetic resin and inorganic admixtures Coves, skirtings, margins, risers, treads, nosings, etc. Anti-slip surfaces, including broadcast non-slip material Broadcast wear-resistant aggregate Dividing strips, weather bars, expansion and contraction joints, including fillers, sealants and dowels Special aggregates and admixtures pressed into the finished face Vacuum dewatering prior to finishing Floated, brushed, trowelled, power floated, ground, etc., finishes Liquid surface hardeners applied as part of the finish Curing and protection Working around openings and sleeves Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparation of base Isolation layer of sand, separation sheets, etc., for floating finish Bonding agents for bonded terrazzo flooring In situ terrazzo to: - floors and landings - treads and risers - channels - skirting and kerbs - decorative motifs - margins and feature strips All associated labours Plastics or metal dividing strips, movement joints, weather bars, etc. Non-slip aggregate, either integral or surface broadcast Non-slip inserts Grinding, grouting and polishing Curing and protection Anti-static terrazzo flooring Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparation of base Bonding agents In situ terrazzo to: - floors and landings - treads and risers - channels - skirting and kerbs - decorative motifs - margins and feature strips All associated labours Plastics or metal dividing strips and movement joints Non-slip aggregate, either integral or surface broadcast Non-slip inserts Grinding, grouting and polishing Protection Anti-static terrazzo flooring Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparing substrate Priming coat and bonding coat applied by brush, roller or spray Main wearing coat applied by trowel, float or screed Coves, skirtings, stair risers, treads, nosings Grinding and polishing Non-slip inserts Surface coatings applied by spray, roller, brush or dry shake and trowelled into the surface Expansion joints, dividing strips, weather bars Working around openings and sleeves Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparing substrate, where a bond is required, by cleaning, applying primer, etc. Isolating asphalt flooring from base where a bond is not required, by dusting, isolating membrane, sheathing felt or glass fibre tissue Mastic asphalt floor finishes including special types such as low temperature, high temperature, oil resistant, acid resistant, static control, gritless Surface finishing including sand rubbed, steel floated, polished, crimped Margins, skirtings, nosings, coved angles, etc. Expansion joints Working around openings and sleeves Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparing substrate Spray applied coating of polypropylene, polyurethane, acrylic emulsions and other plastics, applied with one or more coats, of selected colour, surface finish, patterns and thickness Non-slip, decorative, etc., materials broadcast over the surface Working around openings and sleeves Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparing substrate to receive finish Cementitious, gypsum or resin-bound liquid compounds applied to substrate as a levelling coat for subsequent surface finishes, self levelling with or without hand finishing Cementitious, gypsum or resin-bound liquid compounds applied to substrate to form a finished surface Surface finished with non-slip, decorative, wear resistant, etc., materials, broadcast over the surface before the final set has occurred Coating to new or existing concrete floors, single or multi-coat, rapid setting, one or two pack, with binders of cement, polymer modified cement, epoxy cement, etc., with metallic or mineral aggregate, self-levelling with or without hand finishing Polymer coatings to new or existing concrete floors, single or multi-coat, rapid setting, with solvent free epoxy and other resins, with metallic or mineral aggregate, self-levelling with or without hand finishing Self-levelling gypsum coatings to encase hot water heating pipes and electrical heating cables

No content available for this item.

Preparing substrate Applying penetrating liquid moisture protection to concrete Work required for subsequent floor finishes Working around openings and sleeves Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Honing, light and deep grinding of concrete Sealing and finishing

No content available for this item.

Underlays of manufactured timber boarding, fibre cement sheets, secured mechanically or with adhesives Resilient underlays of rubber, including recycled rubber, resilient foam plastic and similar materials, fixed to the substrate Plywood underlay, incorporating a layer of resilient plastic, fixed with adhesive to the substrate or laid loose Underlays to insulate flooring from cold substrates Underlays of fire-resistant boards

Modifying the surface of concrete by hammering, hacking, grinding, cutting, abrasive blasting, chemical treatment, etc., to produce a textured surface finish Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

Ceramic tiles and mosaics of ceramics, glass, metal, etc., of standard and special shapes, surface finishes and sizes, to: - facades - walls and soffits - treads and risers - channels, skirtings, gutters, kerbs, etc. - swimming pools, decorative features Soap dishes, toilet roll holders, pool accessories, etc., built in as part of the wall tiling Patterns and features incorporated into the general tiled surfaces All associated labours Dividing strips, movement joint strips, etc. Waterproof backing or coating where installed as part of the surfacing work Bonding coating Bedding mortars and adhesives Mechanical fixing Grouting, cleaning, sealing, polishing, etc. Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Precast concrete tiles of all types, shapes, colours and textures Reconstructed stone tiles of all types, shapes colours and textures Precast concrete and reconstructed stone decorative features GRC tiles Tiles fixed with cement mortar, adhesives or mechanical means to: facades - walls and soffits - treads and risers - channels, skirtings, gutters, kerbs, etc. - swimming pools, decorative features All associated labour Waterproof backing or coatings where installed as part of the work Joint and divider strips, movement joints, etc. Pointing joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Terrazzo tiles, cement and resin based, of all types, shapes, colours, textures and decorative features Decorative panels with engraved lettering, emblems, etc., set in the tile surfacing Tiles fixed with cement mortar, adhesives or mechanical means to: facades - walls and soffits - treads and risers - channels, skirtings, gutters, kerbs, etc. - swimming pools, decorative features All associated labours Waterproof backing or coating where part of the work Joint and divider strips, movement joints, etc. Pointing joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Natural stone tiles of all types and colours, worked to required shapes and textures Tiles fixed with cement mortar, adhesives or mechanical means to: facades - walls and soffits - treads and risers - channels, skirtings, gutters, kerbs, etc. - swimming pools, decorative features Waterproof backing or coating where installed as part of the work Joint and divider strips, movement joints, etc. Pointing joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Fired clay tiles of all types, shapes, colours, textures Brick tiles and brick wafers, of all types, shapes, colours and textures, plain or rebated Fixing to surfaces by adhesive or mechanical means, to form patterns to: facades - walls and soffits - treads and risers - channels, skirtings, gutters, kerbs, etc. - swimming pools, decorative features Pointing joints, divider strips, movement joints Waterproof backing or coating where installed as part of the work Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Tiles of rigid plastics, including resin-bound aggregate and reconstructed glass, with selected colour, texture and finish Tiles fixed with adhesives or by mechanical means to: - facades - walls and soffits - treads and risers - channels, skirtings, gutters, kerbs, etc. - swimming pools, decorative features All associated labours Waterproof backing or coating where installed as part of the work Joint and divider mouldings, edge finish, etc. Forming joints, including movement joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Metal tiles of selected sized, shape, colour and surface texture, as a decorative finish to walls and soffits Fixing to substrate by mechanical means or by adhesives Waterproof backing or coating where installed as part of the work Joint and divider mouldings, edge finish, etc. Forming joints, including movement joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Glass tiles of selected sized, shape, colour and surface texture, as a decorative finish to walls and soffits Fixing to substrate by mechanical means or by adhesives Waterproof backing or coating where installed as part of the work Joint and divider mouldings, edge finish, etc. Forming joints, including movement joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparation of substrate, including fibre cement underlay Waterproofing layer or coating under wet areas and decks when installed as part of the tiling Ceramic and mosaic tiles of all types, shapes, colours and textures, including coves, skirtings, nosings, tactile surfaces, etc. Bonding coating Acoustic and thermal underlays Bedding mortars and adhesives Laying in patterns and decorative features on bedding Waterproofing membranes All associated labours Dividing strips, movement joint strips, coving, etc., of metal, plastics, etc. Grouting, cleaning, sealing, polishing, etc. Non-slip strips Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparation of substrate, including fibre cement underlay Waterproofing layer or coating under wet areas when installed as part of the paving Concrete and reconstructed stone paving blocks and slabs of all shapes, colours and textures, including coves, skirtings, nosings, tactile surfaces, etc. Bonding coating Acoustic and thermal underlays Bedding mortars and adhesives Laying internally in patterns on bedding Associated labours Dividing strips, movement joint strips, coving, etc., of metal, plastics, etc. Grouting, cleaning, sealing, polishing, etc. Non-slip strips Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparation of substrate, including fibre cement underlay Waterproofing layer or coating under wet areas when installed as part of the paving Terrazzo tiles of all types, shapes, colours and textures, including coves, skirtings, nosings, tactile surfaces, etc. Terrazzo stair treads, bedded solid or fixed to support Bonding coating Acoustic and thermal underlays Bedding mortars and adhesives Laying in patterns on bedding Associated labours Dividing strips, movement joint strips, coving, etc. Grouting, cleaning, sealing, polishing, etc. Non-slip strips Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparation of substrate, including fibre cement underlay Waterproofing layer or coating under wet areas when installed as part of the paving Natural stone of all types, shapes, colours and textures, including coves, skirtings, nosings, tactile surfaces, etc. Acoustic and thermal underlays Bonding coating Bedding mortars and adhesives Laying in patterns and decorative features on bedding Associated labours Dividing strips, movement joint strips, coving, etc., of metal, plastics, etc. Grouting, cleaning, sealing, polishing, etc. Non-slip strips Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparation of substrate, including fibre cement underlay Waterproofing layer or coating under wet areas when installed as part of the paving Tiles of rigid plastics, of selected shape, colour and surface textures, including coves, skirtings, nosings, tactile surfaces, etc. Tiles and blocks composed of mineral or organic material, of homogenous structure Tiles of resin-bound natural aggregate, reconstructed glass, etc. Acoustic and thermal underlays Laying of tiles on mortar beds or with adhesives Dividing strips, movement joints, coving, etc. Grouting of joints Non-slip strips Cutting at openings and sleeves Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

Steel and cast iron tiles Preparing base, including scabbling, cleaning and bonding agents Setting tiles in sand-cement bedding, resin bedding or in concrete when plastic Dividing strips, movement joints, coving, etc. Grouting, cleaning Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Bedding Adhesives Mechanical fixings

No content available for this item.

No content available for this item.

Preparing substrate Wood block flooring Patterning: mosaic or herringbone Wood parquet of solid wood, compressed bamboo, etc., Thin wood strip flooring Flooring bedded in mastic/adhesive Foam pad under floating flooring Acoustic and thermal underlays Surfaces prefinished or sanded, sealed and polished after laying Dividing strips, movement joints, coving, etc. Non-slip strips Finishing against all penetrations Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparing substrate Solid laminated wood flooring with T & G edges Flooring of laminated timber, with a prefinished laminated wood wearing surface and a laminated balancing sheet on the underside, with T & G edges all round Patterning Foam pad under floating flooring Acoustic and thermal underlays Dividing strips, movement joints, coving, etc. Non-slip strips Finishing against all penetrations Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Acoustic pads and packers, fixed to the supporting substrate frame Thermal insulation and/or vapour barriers fixed at the same time as the flooring Proprietary or non-proprietary supporting clips, fixed to timber or concrete subfloor Sports floors of timber strip flooring, tongued and grooved, end matched and secret nailed to battens or framing, with or without a plywood underlay Sports floors of parquet or thin timber strips, stuck to plywood or acoustic panel sheets Vapour barrier where flooring is fixed over concrete substrate Sanding, sealing and otherwise preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Timber floors of manufactured timber boards, faced with prefinished thin strip flooring, thin parquet or plastics laminate, fixed to framing Prefinished manufactured bamboo flooring Acoustic pads and packers, fixed to the supporting substrate frame Thermal insulation and/or vapour barriers fixed at the same time as the flooring Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

Metal surfacing of sheet steel, stainless steel, aluminium, etc., shaped to suit the vertical surface against which they are fixed Battens, packing, grounds, etc. Securing the metal surfacing to vertical surfaces Grouting or filling behind the surfacing Welded, butted or backed vertical joints, including movement joints Preparing surfaces and applying protective coatings and decorative finishes off site Preparing surfaces to receive protective coatings and decorative finishes on site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Prefinished metal surfacing of steel, stainless steel, aluminium, bronze, etc., with selected surface texture, pattern and finish, in rigid backed or sandwich sheets, with butted or shaped edges Battens, packing, grounds, etc. Fixing surfacing by adhesive or mechanical means Joint and divider strips, movement joints, etc. All associated labour Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Panels and sheet linings of decorative rigid plastics and plastics laminate, with or without a bonded backing, with selected colour, texture and finish for use as decorative and/ or protective linings to vertical surfaces and soffits Battens, packing, grounds, etc. Joint and divider mouldings, edge finish, etc. Forming open joints, including movement joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Natural stone slabs (dimension stone) of all types and colours, worked to required shapes and textures, prepared for mechanical fixing Fixings, anchors, etc. Waterproof backing where installed as part of the surfacing work Joint and divider strips, movement joints, etc. Mechanically fixing of slabs to backing walls and soffits Pointing joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Slabs of resin-bound crushed stone of selected colour and finish, reconstructed glass, etc. Battens, packing, grounds, etc. Jointing and edge mouldings of metal or plastic Fixings of slabs to walls and soffits mechanically or with adhesives Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Terrazzo slabs, cement and resin bound, of all types, shapes, colours, textures and decorative features, prepared for mechanical fixing Decorative panels with engraved lettering, emblems, etc. Fixings, anchors, etc. All associated labours Waterproof backing where installed as part of the surfacing work Joint and divider strips, movement joints, etc. Erecting in place Pointing joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Installation of precast concrete, GRC and reconstructed stone facing slabs and panels Mechanical fixing of slabs and panels to backing wall and soffits Waterproof backing where installed as part of the surfacing work Joints and divider strips, movement joints, etc. Pointing joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Glass and glazing plastics surfacing of all types Mirror-finished glass or plastics surfacing Mechanical and/or adhesive fixing of glass and mirrored glass to vertical surfaces and soffits, with square, bevelled or shaped edges to sheets, including frames Joints and divider strips, movement joints, etc. All associated labour Filling joints and cleaning off Sealants to movement joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Facing units of ceramic/faience sheets and blocks and of terra-cotta, of selected colour, shape and surface finish Battens, packing and grounds Metal support systems Mechanical fixing of units to walls and soffits Cement grouting and pointing All associated labours Waterproof backing or coating where installed as part of the work Sealants, movement joints Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Metal panels of sheet steel, stainless steel, aluminium, etc., shaped to suit the surface against which they are fixed, with integral or applied surface finish Battens, packing, grounds, etc. Securing the metal linings to surfaces Grouting or filling behind the sheeting Welded, butted or backed joints, including movement joints, sealants, etc. All associated labours Waterproof backing or coating where installed as part of the work Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Substrate of plywood or manufactured timber boarding, attached to the wall and prepared to receive timber surfacing and panelling Wood strip, panelling, veneered sheets and matching solid timber, as sheet surfacing Securing timber with adhesives or mechanically Sealing, polishing, finishing, etc., when required to be executed with the lining and panelling, either on site or off site Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Clips, acoustic pads

Adhesives systems, membranes, vapour barriers

No content available for this item.

No content available for this item.

No content available for this item.

Preparing substrate Acoustic and thermal underlays Unbacked, backed, foam backed, non-slip, static-control plastics in sheet and tile form Laying to all surfaces, including floors, stairs, vertical surfaces and soffits, with adhesive Skirtings formed integrally with the flooring Margins and edge strips, decorative patterns, movement joints, stair nosings, non-slip strips, etc. Butt, glued and welded joints Sealing and finishing Non-slip strips Finishing against all penetrations and at edges Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparing substrate Acoustic and thermal underlays Hessian and felt-backed linoleum in sheet or tile form, including non-slip and static control linoleum Laying to all surfaces, including floors, stairs, vertical surfaces and soffits, laid loose or with adhesive on floors, fixed with adhesive to other surfaces Seam welding Skirtings formed integrally with the flooring Margins and edge strips, decorative patterns, movement joints, stair nosings, etc. Sealing and finishing Non-slip strips Finishing against all penetrations and at edges Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparing substrate Acoustic and thermal underlays Unbacked, backed, foam backed, non-slip, static-control rubber in sheet and tile form Porous rubber flooring Interlocking pavers Laying to all surfaces, including floors, stairs, vertical surfaces and soffits, with adhesive Skirtings formed integrally with the flooring Margins and edge strips, decorative patterns, movement joints, stair nosings, non-slip strips etc. Sealing and finishing Non-slip strips Finishing against all penetrations and at edges Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparing substrate Acoustic and thermal underlays Unfinished or prefinished cork tiles and sheet cork Fixing to all surfaces, including floors, stairs, vertical surfaces and soffits with adhesive Margins and edge strips, decorative patterns, movement joints, stair nosings, non-slip strips, etc. Skirtings and coves Filling and sealing open joints, including movement joints Sanding, sealing and finishing Finishing against all penetrations and at edges Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparing substrate Acoustic and thermal underlays Woven, seamed and fabricated coverings of sisal, hemp, cotton and coconut fibre, in sheet and tile form Laying to all surfaces, laid loose or fixed with adhesive Skirtings formed integrally with the flooring Margins and edge strips, decorative patterns, movement joints, stair nosings, etc. Sealing and finishing Finishing against all penetrations and at edges Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparing substrate Separation, acoustic and thermal underlays Unfinished or prefinished composite material Fixing to all surfaces, including floors, stairs, vertical surfaces and soffits Loose laying on floors Margins and edge strips, decorative patterns, movement joints, stair nosings, non-slip strips, etc. Skirtings and coves Filling and sealing open joints, including movement joints Sanding, sealing and finishing Finishing against all penetrations and at edges Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

Adhesive systems Trim underlay systems

No content available for this item.

No content available for this item.

Preparing substrate Acoustic and thermal underlays Fibrous and non-fibrous underlays Broadloom, seamed, woven, tufted, matted, felted and needle-punched carpets of natural and synthetic fibres Synthetic grass carpet Carpets laid loose, stuck or mechanically fixed to floors and landings, treads and risers, vertical surfaces, soffits, etc. Skirtings formed integrally with the flooring Rods, grippers and edgings Stair nosings Tapes, coverstrips, threshold strips, etc. Seaming and binding Mothproofing, anti-stain and static-control coatings Resilient underlays of paper, felt, rubber, fibre or similar Finishing against all penetrations and at edges Adhesive sheet to protect surfaces after laying Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Skirtings formed integrally with the flooring Carpet tiles laid loose or stuck to floors and landings, treads and risers, vertical surfaces, etc. Stair nosings Preparing substrate Adhesive sheet to protect surfaces after laying Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Finishing against all penetrations and at edges Mothproofing, anti-stain and static-control coatings Tapes, coverstrips, threshold strips, etc

No content available for this item.

No content available for this item.

No content available for this item.

Floor mats of aluminium, stainless steel, plastics, etc., with strips of rubber, natural fibre, synthetic fibre incorporated, fixed into floor recesses Floor mats of rubber, etc., fixed into floor recesses or surface laid

Non-slip stair nosings and treads Non-slip strips to treads and hard paving Paint on/flow on liquids with grip incorporated or sprinkled on Non-slip material, placed in prepared recesses

No content available for this item.

No content available for this item.

Preparing surfaces to receive coating systems Applying paint and coating systems by brush, roller or spray, including sealing, priming, surfacing, undercoating and finishing Applying clear finishing

Preparing surfaces to receive coating systems Applying coating systems, including sealing, priming, surfacing, undercoating and finishing Applying clear finishing

Removal and disposal of existing coatings Preparing and repairing existing surfaces to receive coating systems Applying paint and coating systems by brush, roller or spray, including sealing, priming, surfacing, undercoating and finishing Applying clear finishing

Preparing surfaces to receive coating systems Applying paint and coating systems by brush, roller or spray, including sealing, priming, surfacing, undercoating and finishing Applying clear finishing

Preparing surfaces to receive coating systems Applying coating systems, including sealing, priming, surfacing, undercoating and finishing Applying clear finishing

Removal and disposal of existing coatings Preparing and repairing existing surfaces to receive coating systems Applying paint and coating systems by brush, roller or spray, including sealing, priming, surfacing, undercoating and finishing Applying clear finishing

Preparing surfaces to receive coating systems Applying coating systems, including sealing, priming, surfacing, undercoating and finishing Applying clear finishing

No content available for this item.

Preparing surfaces to receive coating systems Applying stain systems Applying clear finishing system, including sealing, priming, surfacing, undercoating and finishing

Preparing surfaces to receive coating systems Applying coating systems, including sealing, priming, surfacing, undercoating and finishing Providing maintenance system

Preparing surface Applying coating systems by brush, roller or spray, including sealing, priming, surfacing, undercoating and finishing, etc.

Preparation of substrate Preparatory treatments, bonding agents, etc. Brush, spray or trowel applied intumescent and insulative coatings with textured, trowelled or pressed finishes Control joints Beads, stops and accessories Finishing against all penetrations Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Preparation for subsequent finishing coats Non-fixed work (see Explanatory notes)

Preparation of substrate Preparatory treatments, bonding agents, etc. Brush, spray or trowel applied intumescent and insulative coatings with textured, trowelled or pressed finishes Control joints Beads, stops and accessories Finishing against all penetrations Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Preparation for subsequent finishing coats Non-fixed work (see Explanatory notes)

Preparation of substrate Preparatory treatments, bonding agents, etc. Applying coating systems by brush, roller or spray, including sealing, priming, surfacing, undercoating and finishing Preparation for subsequent finishing coats Non-fixed work (see Explanatory notes)

Preparation of substrate Preparatory treatments, bonding agents, etc. Applying coating systems by brush, roller or standard spray systems, including sealing, priming, surfacing, undercoating and finishing Preparation for subsequent finishing coats Non-fixed work (see Explanatory notes)

Preparation of substrate Preparatory treatments Applying coating systems

Preparing floor surface Liquids applied to floor finishes to provide a non-slip surface, to increase conductivity, density, resistance to liquids, etc. Liquid surface hardeners and anti-dusting liquids to cementitious floors

Preparation of substrate Preparatory treatments. Applying coating systems, including sealing, priming, surfacing, undercoating and finishing Preparation for subsequent finishing coats

Preparing surfaces, including fungicidal treatment, sizing, sealing and priming Hanging or applying: lining papers paperbacked metal foil linings expanded polystyrene linings decorative wallpapers, anaglypta, etc, including plastics-faced wallpapers paperbacked sheet plastics borders and decorative motifs Finishing against all penetrations and at edges Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparing substrate, including fungicidal treatment Sizing and sealing Hanging or applying: application of backed or unbacked fabrics decorative sheets, including plastics-faced fabric backed hessian, linen, cotton, wool, silk, glass fibre and synthetic fibre fabrics backed grasses borders and decorative motifs Clear finish Decorative coatings Finishing against edges and penetrations Forming openings and cutting holes as required to suit subcontractor and General Contractor responsibility Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Non-fixed work (see Explanatory notes)

Preparing substrate, including fungicidal treatment Sizing and sealing Fabric-backed thin wood veneers Fabric-backed thin cork sheet Fabric-backed flexible metal foil Fabric-backed flexible sheet plastics Flexible sheet plastics Finishing against edges and penetrations Non-fixed work (see Explanatory notes)

No content available for this item.

Preparing the steel, including holes in hollow sections and enclosed elements, for air expansion and internal galvanizing Additional temporary steel for lifting and stabilizing the item during galvanizing Preparing surfaces Galvanizing by dipping the item Post dipping processes, including removing spikes and cleaning

Preparation of substrate Applying coating, spraying anodic metal, zinc and/or aluminium, in a molten or semi-molten form, preferably in a work shop Preparation for subsequent finishing coats Non-fixed work (see Explanatory notes)

No content available for this item.

No content available for this item.

No content available for this item.

Preparing surfaces to receive system Applying acoustic material and waterproofing, including reinforcing materials and accessories Finishing against all other surfaces, penetrations and fixtures Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Preparation for subsequent items and finishing work

Preparing surfaces to receive system Applying waterproofing, including reinforcing materials and accessories Finishing against all other surfaces, penetrations and fixtures Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Preparation for subsequent items and finishing work

Preparing surfaces to receive system Applying acoustic material, including reinforcing materials and accessories Finishing against all other surfaces, penetrations and fixtures Sealing to openings, holes and joints as required to suit subcontractor and General Contractor responsibility Preparation for subsequent items and finishing work

No content available for this item.

No content available for this item.

No content available for this item.